Model Engine Maker

Engines => Restoration of Model Engines => Topic started by: rarach22 on July 12, 2019, 10:17:26 PM

Title: repair of an old stationary steam model
Post by: rarach22 on July 12, 2019, 10:17:26 PM
(https://i.postimg.cc/8fV97q3W/024-BD552-DA46-4400-8287-1-E2-F36130710.jpg) (https://postimg.cc/8fV97q3W)

(https://i.postimg.cc/jC7RLTWW/0500-B774-FD64-4174-9-A40-13-EBF1-A3-A06-A.jpg) (https://postimg.cc/jC7RLTWW)

(https://i.postimg.cc/6yHKPpgm/05-E8126-C-274-C-4-AC8-90-FC-694083-A67-A19.jpg) (https://postimg.cc/6yHKPpgm)

(https://i.postimg.cc/pyztPB7z/0685418-F-8-AA8-4952-A41-F-639-B38-F4-A239.jpg) (https://postimg.cc/pyztPB7z)

(https://i.postimg.cc/R3Njy1K3/0-CBCCA25-5610-4-AD3-B02-F-33-AF8-DE688-B2.jpg) (https://postimg.cc/R3Njy1K3)

(https://i.postimg.cc/F7bmVxVN/1-B19-F8-D6-D8-D1-4-BCC-8400-3-EAADD15-D974.jpg) (https://postimg.cc/F7bmVxVN)

(https://i.postimg.cc/hXpBHPYY/26-B41189-AB92-4-BEB-8-EE9-C8-D1-BEAA2-D38.jpg) (https://postimg.cc/hXpBHPYY)

(https://i.postimg.cc/pmpvMttX/2-A53-CE4-A-9-C20-4-A13-A4-DB-1-C5699-F99142.jpg) (https://postimg.cc/pmpvMttX)

(https://i.postimg.cc/Ty3RwWmG/2-BF1-C52-A-453-E-4145-98-CC-0-E591-A8-DB46-B.jpg) (https://postimg.cc/Ty3RwWmG)

(https://i.postimg.cc/t7j9ZfF2/2-D6-C45-A4-E66-C-4215-BDF1-11-E0506-A654-B.jpg) (https://postimg.cc/t7j9ZfF2)

(https://i.postimg.cc/XGy6GKvM/34-A62424-D973-4-F84-A35-B-20-FCC50-BE37-E.jpg) (https://postimg.cc/XGy6GKvM)

(https://i.postimg.cc/fSmsF747/4-C5-B4-AC2-1-FA1-4-BE9-BF8-B-BAA3842-FCD2-C.jpg) (https://postimg.cc/fSmsF747)

(https://i.postimg.cc/8JqDtKYP/547-A932-A-8546-48-B3-AF30-5-C110-BC59779.jpg) (https://postimg.cc/8JqDtKYP)

(https://i.postimg.cc/BL8459MV/558424-A7-E78-E-42-DE-B41-E-0-DDA1986-BCDA.jpg) (https://postimg.cc/BL8459MV)

(https://i.postimg.cc/nsrJZfbh/5667-A21-A-5-EFE-4-FA3-B92-E-BD8-FA68-C6770.jpg) (https://postimg.cc/nsrJZfbh)

(https://i.postimg.cc/rdZqtFC4/6075-BBF7-323-D-45-EE-A1-E4-C635-DDED1-AE0.jpg) (https://postimg.cc/rdZqtFC4)

(https://i.postimg.cc/QFXD4Wf5/68-DAE22-C-53-E1-4-C90-81-BC-837-E892-A279-D.jpg) (https://postimg.cc/QFXD4Wf5)

(https://i.postimg.cc/8F9qSFmZ/6-A490-D52-BA4-B-46-DA-A7-E8-9935-F18-EDAD2.jpg) (https://postimg.cc/8F9qSFmZ)

(https://i.postimg.cc/TKkztNLM/6-DA168-F2-17-C1-48-CA-96-C8-5-D22727-A028-D.jpg) (https://postimg.cc/TKkztNLM)

(https://i.postimg.cc/MvwJHQ24/7-E77311-E-E226-499-F-9-C82-C7-CCBF9-DDABE.jpg) (https://postimg.cc/MvwJHQ24)

(https://i.postimg.cc/2LQpTzv2/87808-B7-C-E8-FF-466-E-A825-FB59-F795-C460.jpg) (https://postimg.cc/2LQpTzv2)

(https://i.postimg.cc/p5xcWKhJ/885-C1990-1-D2-D-4-FDE-96-BF-77-EE3-A2146-A5.jpg) (https://postimg.cc/p5xcWKhJ)

(https://i.postimg.cc/kV0hH07Z/8-A7206-F4-8377-4-C54-80-D6-3-AF6-F50-ECF62.jpg) (https://postimg.cc/kV0hH07Z)

(https://i.postimg.cc/yWysFPPB/9953-C933-2819-48-CC-9486-7-D08-E60-D7-A99.jpg) (https://postimg.cc/yWysFPPB)

(https://i.postimg.cc/ctyyQKKv/AFBB1-DD6-9473-4264-BC6-F-F0-DC1-BB4-D295.jpg) (https://postimg.cc/ctyyQKKv)

(https://i.postimg.cc/dkGSc510/B25-BC683-7-D75-42-CC-8-B56-EA370-AF6645-A.jpg) (https://postimg.cc/dkGSc510)

(https://i.postimg.cc/fJD1DQYQ/B4706-F61-F1-DA-4669-AB1-D-5-BA6-EE836979.jpg) (https://postimg.cc/fJD1DQYQ)

(https://i.postimg.cc/4YF06KqX/BE89-B3-EE-E630-4-A34-87-C6-3-BF9-B60-B20-CE.jpg) (https://postimg.cc/4YF06KqX)

(https://i.postimg.cc/m1wXth7f/C4-A22030-BAA0-4-A4-B-B531-66-DAB10-AE7-C8.jpg) (https://postimg.cc/m1wXth7f)

(https://i.postimg.cc/jLqKv7gf/C4-D5-A505-2406-464-A-A8-C1-2-F2853-BA9302.jpg) (https://postimg.cc/jLqKv7gf)

(https://i.postimg.cc/18zTV0WW/CD920-E27-464-A-4-FF3-847-E-D11-D15-FBF428.jpg) (https://postimg.cc/18zTV0WW)

(https://i.postimg.cc/1fKhq3yz/D36-A8-CEC-7812-4-D9-D-ADCA-41-D8512-B877-C.jpg) (https://postimg.cc/1fKhq3yz)

(https://i.postimg.cc/BXpkv7CL/D4-AE78-D7-FBCE-4-ABF-AD1-D-AB5-C63087-FD2.jpg) (https://postimg.cc/BXpkv7CL)

(https://i.postimg.cc/JyFWzYMc/D5915-D30-E774-43-F4-9-BEE-EB0912-E5-ED8-F.jpg) (https://postimg.cc/JyFWzYMc)

(https://i.postimg.cc/wRcPLw8r/D9554-C74-68-FC-49-BE-AF00-5-A5-E0-B706-E4-B.jpg) (https://postimg.cc/wRcPLw8r)

(https://i.postimg.cc/mtWB9nMm/DA6-AE8-B9-D5-D2-47-E0-9515-5-F136-F812239.jpg) (https://postimg.cc/mtWB9nMm)

(https://i.postimg.cc/PpD0rt6T/DCE31745-91-D9-43-EC-859-D-C2-C3-F00193-BB.jpg) (https://postimg.cc/PpD0rt6T)

(https://i.postimg.cc/14pbk3nK/F9482-E09-CF0-F-4-B90-9-CA4-418-CDD436485.jpg) (https://postimg.cc/14pbk3nK)
Title: Re: repair of an old stationary steam model
Post by: MJM460 on July 13, 2019, 08:51:12 AM
Great work, you have a real eye for those decorative posts.

MJM460
Title: Re: repair of an old stationary steam model
Post by: b.lindsey on July 13, 2019, 01:45:03 PM
Quite a contrast between that next to last picture and the box of parts shown at the beginning. Should end up being a beautiful and beautifully restored engine!!

Bill
Title: Re: repair of an old stationary steam model
Post by: Dave Otto on July 14, 2019, 05:03:23 PM
Beautiful work Pavel!

Dave
Title: Re: repair of an old stationary steam model
Post by: rarach22 on July 14, 2019, 10:19:15 PM
(https://i.postimg.cc/Lh0SPdPw/2-DCE885-E-9082-454-C-9-E00-9801-D57-C6-F5-A.jpg) (https://postimg.cc/Lh0SPdPw)

(https://i.postimg.cc/0bMsdtdQ/B937-E192-41-A3-4-CE4-8-C45-9-D0279832-D57.jpg) (https://postimg.cc/0bMsdtdQ)

(https://i.postimg.cc/Cz3Vvjm4/BDE3-DFA8-79-DE-42-B1-9-A8-B-F4-ECEE6609-DE.jpg) (https://postimg.cc/Cz3Vvjm4)
Title: Re: repair of an old stationary steam model
Post by: b.lindsey on July 15, 2019, 12:17:14 AM
Most impressive Pavel. Love it!!!

Bill
Title: Re: repair of an old stationary steam model
Post by: Johnmcc69 on July 15, 2019, 02:41:54 AM
 :ThumbsUp:
 Beautiful work Pavel! Looking forward to the steam up!

 John
Title: Re: repair of an old stationary steam model
Post by: rarach22 on July 15, 2019, 10:54:14 PM
(https://i.postimg.cc/xJcxzmPW/1-D1-C0-C37-5-A0-C-40-EA-93-EF-AD7-F0-C3-B431-A.jpg) (https://postimg.cc/xJcxzmPW)

(https://i.postimg.cc/xksp85Lv/3449-E8-A0-B511-46-C8-A2-FD-B23-FBEBB0-BF4.jpg) (https://postimg.cc/xksp85Lv)

(https://i.postimg.cc/yk9GjFzK/77-F21-B46-2-D65-4-ACB-90-C7-28597-ED742-A5.jpg) (https://postimg.cc/yk9GjFzK)

(https://i.postimg.cc/zyrccVJg/FAA46546-10-D9-4-D58-92-BE-9-F4-BA2-A00-CC7.jpg) (https://postimg.cc/zyrccVJg)
Title: Re: repair of an old stationary steam model
Post by: Jim on July 16, 2019, 08:50:22 AM
Very nice work on a lovely old engine and thanks for the detailed photos.
Title: Re: repair of an old stationary steam model
Post by: rarach22 on July 25, 2019, 10:11:27 PM
(https://i.postimg.cc/Q9rXXP4J/4-D41-E6-F8-C137-4-A59-89-DB-2919-A61-E7155.jpg) (https://postimg.cc/Q9rXXP4J)

(https://i.postimg.cc/K1wGW4tV/55-F1086-D-969-D-4688-BF24-2-CF496-D5-EAA9.jpg) (https://postimg.cc/K1wGW4tV)

(https://i.postimg.cc/sBWjCyc2/E5-DC5148-3-A3-F-4-A2-B-84-C3-5-FE5073515-EC.jpg) (https://postimg.cc/sBWjCyc2)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on July 26, 2019, 06:08:22 PM
(https://i.postimg.cc/Z0pV50NN/D4-AAA898-28-BA-4-BB1-92-DC-A0-EFE805-DD8-D.jpg) (https://postimg.cc/Z0pV50NN)

(https://i.postimg.cc/9D8Bn766/DD503-C18-F12-B-4-C8-A-B2-DC-FF60-AACB04-D1.jpg) (https://postimg.cc/9D8Bn766)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on July 29, 2019, 09:46:26 PM
(https://i.postimg.cc/FYqM4tbs/5-B1-F5-CE0-D86-B-4-D62-9-A7-D-CE97-C74496-A3.jpg) (https://postimg.cc/FYqM4tbs)

(https://i.postimg.cc/4K9r48wv/85-BF2798-0-B5-A-48-FD-B0-CE-0-DAC12303-F51.jpg) (https://postimg.cc/4K9r48wv)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on July 31, 2019, 09:47:07 PM
(https://i.postimg.cc/940RKwrr/5-C8-AD1-FC-7-A6-E-4330-8660-1-E2-B787355-BC.jpg) (https://postimg.cc/940RKwrr)

(https://i.postimg.cc/XZPGbNCx/B04-CA8-D8-78-FD-498-F-A61-A-DDD802-E6-BA04.jpg) (https://postimg.cc/XZPGbNCx)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on August 01, 2019, 09:22:32 PM
(https://i.postimg.cc/5661CkbG/3592-AA32-4339-4692-B988-84-FC48-E087-C1.jpg) (https://postimg.cc/5661CkbG)

(https://i.postimg.cc/9rK2ttff/42364709-733-C-40-E2-8-CF0-D9-CE6-C242-B93.jpg) (https://postimg.cc/9rK2ttff)

(https://i.postimg.cc/BjF0hL8B/8659-BB6-D-E372-4-F13-913-D-771-CAE1158-C2.jpg) (https://postimg.cc/BjF0hL8B)

(https://i.postimg.cc/DJ6Fq9WV/88-ED33-B6-61-E8-4-EDA-A08-F-7-D6-C78-C66866.jpg) (https://postimg.cc/DJ6Fq9WV)

(https://i.postimg.cc/R3zz2SK5/BD04-F7-A0-77-AF-4-D1-E-8-DAA-BDAE7-AF014-C3.jpg) (https://postimg.cc/R3zz2SK5)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on August 03, 2019, 09:54:43 PM
(https://i.postimg.cc/ftjyWXhh/27-D47443-5638-406-B-88-CC-599-F17554488.jpg) (https://postimg.cc/ftjyWXhh)

(https://i.postimg.cc/WDZtKCWz/31153-CCA-5-B96-4521-8324-C5092-F8-D130-B.jpg) (https://postimg.cc/WDZtKCWz)

(https://i.postimg.cc/JsvGpMQS/716-C825-A-F6-F7-4-A0-F-A5-B6-1-B3676-B6-F99-B.jpg) (https://postimg.cc/JsvGpMQS)

(https://i.postimg.cc/WFPtP8Cn/83-E50-C77-AFF5-4937-B84-A-6-B7-F9-AA681-E5.jpg) (https://postimg.cc/WFPtP8Cn)

(https://i.postimg.cc/BLW4KvCQ/D0975-A46-63-E1-4527-9653-FA412118-FF54.jpg) (https://postimg.cc/BLW4KvCQ)

(https://i.postimg.cc/YvhvNhQ1/E38-C7-E91-FFFC-4-F2-D-AD76-F0032036694-A.jpg) (https://postimg.cc/YvhvNhQ1)

(https://i.postimg.cc/9zCz8xGX/EA8-EFCE0-E55-E-43-F1-9811-2-EEB77370351.jpg) (https://postimg.cc/9zCz8xGX)
Title: Re: repair of an old stationary steam model
Post by: Johnmcc69 on August 04, 2019, 02:01:46 AM
Very nice!
 :popcorn:
 John
Title: Re: repair of an old stationary steam model
Post by: rarach22 on August 05, 2019, 09:25:32 PM
(https://i.postimg.cc/ZWNbHH6J/15-EBA735-0-D3-A-419-E-9-A4-D-6-DDA29-C3-C65-E.jpg) (https://postimg.cc/ZWNbHH6J)

(https://i.postimg.cc/nX6qC3G7/140-D1427-515-A-4807-A420-64076-F3113-B6.jpg) (https://postimg.cc/nX6qC3G7)

(https://i.postimg.cc/p9zz8KsS/1-AF82-E99-E0-D9-4-B68-B66-A-A80-D16142216.jpg) (https://postimg.cc/p9zz8KsS)

(https://i.postimg.cc/JGYNWryp/3-D39-D661-4827-45-EB-92-CF-45-AE82-AFFD66.jpg) (https://postimg.cc/JGYNWryp)

(https://i.postimg.cc/21q4kshr/EA089-AC7-7-CFB-4510-BAB7-148-E1-BD0-C7-F5.jpg) (https://postimg.cc/21q4kshr)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 07, 2019, 09:09:12 PM
(https://i.postimg.cc/SXffxnzx/02-AB547-C-BD68-4-FD2-A7-C7-00-D40-BBBF3-DC.jpg) (https://postimg.cc/SXffxnzx)

(https://i.postimg.cc/1nW0DbBx/26841159-5-D40-43-A9-B04-B-EC9-F6198-E3-B8.jpg) (https://postimg.cc/1nW0DbBx)

(https://i.postimg.cc/tZRtZ9ht/68-D9-B8-B2-2-AAD-4-DE7-B89-C-334-FFF2-FD089.jpg) (https://postimg.cc/tZRtZ9ht)

(https://i.postimg.cc/zHVC7p2y/7-F3-E523-A-39-B0-49-EA-AF42-FBA61-DF47-EAB.jpg) (https://postimg.cc/zHVC7p2y)

(https://i.postimg.cc/JtmSxXQP/9-C28-EB68-3634-4-A9-D-8914-0756-F9-D39-B3-B.jpg) (https://postimg.cc/JtmSxXQP)

(https://i.postimg.cc/gx6MmcDx/A7-AF4-F7-C-0-A80-46-A9-8352-325-E8-A013-B2-C.jpg) (https://postimg.cc/gx6MmcDx)

(https://i.postimg.cc/nMzGncVn/BEF0-C62-D-E5-B1-4-FC1-949-C-D76917-D9-E248.jpg) (https://postimg.cc/nMzGncVn)

(https://i.postimg.cc/Z0MFnt0p/F2404529-0-CD9-4467-BE4-F-619-E58913-E39.jpg) (https://postimg.cc/Z0MFnt0p)
Title: Re: repair of an old stationary steam model
Post by: MJM460 on September 08, 2019, 11:03:35 AM
Good to see the beautiful work progressing. 

Is that a SS boiler in progress as well?

MJM460

Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 08, 2019, 07:50:06 PM
Good to see the beautiful work progressing. 

Is that a SS boiler in progress as well?

MJM460
s

yes boiler will be stainless steel .... type cochran boiler
Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 08, 2019, 08:09:16 PM
(https://i.postimg.cc/SXffxnzx/02-AB547-C-BD68-4-FD2-A7-C7-00-D40-BBBF3-DC.jpg) (https://postimg.cc/SXffxnzx)

(https://i.postimg.cc/JtmSxXQP/9-C28-EB68-3634-4-A9-D-8914-0756-F9-D39-B3-B.jpg) (https://postimg.cc/JtmSxXQP)

(https://i.postimg.cc/7Gk3N8db/39007776-EFBD-4-C60-AAB0-1-A1-D849-B002-C.jpg) (https://postimg.cc/7Gk3N8db)

(https://i.postimg.cc/4KtvtN8r/57039162-5-F80-45-BF-AD25-7-AC533784-EDF.jpg) (https://postimg.cc/4KtvtN8r)

(https://i.postimg.cc/pmmJWBKV/D4-C204-AE-FB5-E-46-C3-82-E5-47952-B3-D0-CAA.jpg) (https://postimg.cc/pmmJWBKV)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 09, 2019, 10:14:13 PM
(https://i.postimg.cc/p5Pg9LLD/08371-A34-3147-48-C6-96-A4-2316812-ED4-F5.jpg) (https://postimg.cc/p5Pg9LLD)

(https://i.postimg.cc/Q9Q2xTh8/557-E31-CE-47-B1-42-AA-96-A1-5-AF119-C8-B9-DF.jpg) (https://postimg.cc/Q9Q2xTh8)

(https://i.postimg.cc/56NhbyGJ/7-FCED15-F-3-BF6-4-F0-D-8-FD4-9-E19-DAED0-C1-B.jpg) (https://postimg.cc/56NhbyGJ)

(https://i.postimg.cc/z35m20FV/C1-B6-F352-7090-4-A0-B-9-FEF-765-B6-E760-AE0.jpg) (https://postimg.cc/z35m20FV)
Title: Re: repair of an old stationary steam model
Post by: Johnmcc69 on September 10, 2019, 02:20:41 AM
That's some really nice work Pavel!
 You are a craftsmen!

 John
Title: Re: repair of an old stationary steam model
Post by: derekwarner on September 10, 2019, 06:38:35 AM
Interesting angle of engagement for the grub screw Pavel........

1. is the main shaft a replacement?
2. will you make a flat or dimple the shaft to allow the grub screw to engage at such an angle?
3. the cylinder appears to be 50 mm........or is it 2"?
4. not usual to see Continental/European grub screws with a screwdriver flat......so is the original English?

Derek
Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 10, 2019, 07:38:03 AM
Interesting angle of engagement for the grub screw Pavel........

1. is the main shaft a replacement?
2. will you make a flat or dimple the shaft to allow the grub screw to engage at such an angle?
3. the cylinder appears to be 50 mm........or is it 2"?
4. not usual to see Continental/European grub screws with a screwdriver flat......so is the original English?

Derek

Hi Derek,

the screw will touch on the shaft, where there will be a small area, the original steam engine is only a bronze cast of the cylinder, everything else I do from my drawings
Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 16, 2019, 10:48:13 PM
Zraq0ar7c1o
Title: Re: repair of an old stationary steam model
Post by: MJM460 on September 16, 2019, 10:52:27 PM
Well done, a most interesting design.

MJM460

Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 26, 2019, 08:39:11 PM
(https://i.postimg.cc/1gf029q4/47454-F91-F8-AF-4-EC9-B440-5-C9-E9-B4226-EF.jpg) (https://postimg.cc/1gf029q4)

(https://i.postimg.cc/nXdY3sM6/9321-E773-91-E0-4-FF1-A518-2-D6-E8-A297-E5-F.jpg) (https://postimg.cc/nXdY3sM6)

(https://i.postimg.cc/4ntPXNF9/A21-D33-A6-0014-48-A1-B8-CB-5857-DA8749-C5.jpg) (https://postimg.cc/4ntPXNF9)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 27, 2019, 07:40:00 PM
(https://i.postimg.cc/SXFsW7LD/F01-CA6-A9-4-BDB-488-F-9439-2-BB7498-DE075.jpg) (https://postimg.cc/SXFsW7LD)

(https://i.postimg.cc/2bCStkKW/FED7-E2-BB-E803-4-A8-A-BA67-E8-C681328580.jpg) (https://postimg.cc/2bCStkKW)
Title: Re: repair of an old stationary steam model
Post by: derekwarner on September 28, 2019, 08:29:25 AM
Pavel.......a question......

The valve on the right side appears as a rotating spindle [globe valve or needle valve with the bonnet bolted to the body] & typical of an Isolation Valve which you have shown on previous builds.......

The valve on the left appears as a rising spindle valve with the bonnet screwed into the body, [and actuated via an external mechanism bolted within or to the connected hoop ?] so if this is the case is an early version of a speed Control Valve?

We also see you have changed from a 4 bolt pattern to a 5 bolt pattern.........any reason for this?  :shrug:

Derek  :cheers:
Title: Re: repair of an old stationary steam model
Post by: rarach22 on September 28, 2019, 12:25:11 PM
Hi Derek, the hoop valve will be connected to the Watt controller. I use five screws for larger flanges. (aesthetics) Usually for pipe 4mm 4 screws and 8mm 5 bolts. It's my style.
Title: Re: repair of an old stationary steam model
Post by: 10KPete on September 28, 2019, 11:42:01 PM
It's my style.

 :ThumbsUp: :ThumbsUp: :ThumbsUp:

Pete
Title: Re: repair of an old stationary steam model
Post by: rarach22 on October 22, 2019, 08:54:47 PM
(https://i.postimg.cc/34Cwxd5h/061-AE29-E-4-E89-463-B-88-B5-2-EE4-B62-AB06-B.jpg) (https://postimg.cc/34Cwxd5h)

(https://i.postimg.cc/Fdm98NfB/0-D6139-DC-E8-A9-4083-84-AA-D4-BA2453-F4-CF.jpg) (https://postimg.cc/Fdm98NfB)

(https://i.postimg.cc/0rV8Xg9V/10323375-6-B39-458-A-A39-F-F9-DED2-DF135-D.jpg) (https://postimg.cc/0rV8Xg9V)

(https://i.postimg.cc/3kdWF8pj/2234-EC04-0-C95-41-EE-A2-C5-997-E7-E6-A7972.jpg) (https://postimg.cc/3kdWF8pj)

(https://i.postimg.cc/3kVNLsCs/28-E1-A331-0-E50-4-CA6-81-AB-9-EAADCF5-F02-D.jpg) (https://postimg.cc/3kVNLsCs)

(https://i.postimg.cc/t7kT0ZNt/5-A08-A2-E8-4-E68-42-B1-AECD-0868-AE1571-CC.jpg) (https://postimg.cc/t7kT0ZNt)

(https://i.postimg.cc/RNbZFk8W/79-DE27-E3-8-EEC-4195-8372-F419-C318-ABC8.jpg) (https://postimg.cc/RNbZFk8W)

(https://i.postimg.cc/8jCCTpy8/8-B74-E2-D1-4482-40-FE-870-B-6-F8-ED52-E2024.jpg) (https://postimg.cc/8jCCTpy8)

(https://i.postimg.cc/30x3r1Fj/9462-E68-C-4-F5-C-4273-8-B34-67-A2-E8-DF9-C18.jpg) (https://postimg.cc/30x3r1Fj)

(https://i.postimg.cc/K1kvg9SJ/AFE554-F0-BF0-B-4-BE8-9-B91-87-C76-A8-B9-AC9.jpg) (https://postimg.cc/K1kvg9SJ)

(https://i.postimg.cc/1gFtbvvf/D27-CF0-DB-EB87-40-C1-B039-C39577039-BF5.jpg) (https://postimg.cc/1gFtbvvf)

(https://i.postimg.cc/zHzGb88g/DFBC4-C13-4571-4712-86-D2-E99-B920-BB9-FB.jpg) (https://postimg.cc/zHzGb88g)

(https://i.postimg.cc/vcDGpPBb/E4-CDE3-DC-2743-4-D47-AC36-F997-C7-DEB6-B0.jpg) (https://postimg.cc/vcDGpPBb)

(https://i.postimg.cc/XG8V0md7/F47-EBB1-B-E51-B-47-F4-A001-76744-A5-D8-C52.jpg) (https://postimg.cc/XG8V0md7)

(https://i.postimg.cc/VSXfKdNt/FF7-A103-E-B7-A4-4-B54-9-E49-61-BBF9-C86-BA9.jpg) (https://postimg.cc/VSXfKdNt)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on October 22, 2019, 09:00:00 PM
J7JrFARpfDM
Title: Re: repair of an old stationary steam model
Post by: derekwarner on October 23, 2019, 03:58:18 AM
Amazing work Pavel....just two questions

1. was the Blue gasket material too tough and incompressible with scale torque?.....the Straw cardboard looks torn on the edge so was softer & more suitable?

2. Is this some sort of flared tube fitting in the second image?


Derek
Title: Re: repair of an old stationary steam model
Post by: Roger B on October 23, 2019, 05:07:36 PM
Splendid as ever  :praise2:  :praise2:  :wine1:
Title: Re: repair of an old stationary steam model
Post by: rarach22 on November 02, 2019, 04:10:43 PM
(https://i.postimg.cc/d7gWhzHQ/14-A602-AA-EC1-E-48-CD-B19-F-7-D9339-F0-A3-AF.jpg) (https://postimg.cc/d7gWhzHQ)

(https://i.postimg.cc/SjMBfGCt/22131173-48-B6-4499-BE5-C-5292-B843-D733.jpg) (https://postimg.cc/SjMBfGCt)

(https://i.postimg.cc/xXCgt0BT/A7076-CAD-4-DD2-4875-BFB8-A64921005-D60.jpg) (https://postimg.cc/xXCgt0BT)

(https://i.postimg.cc/YhtdLN3F/AB63-F07-C-E4-B5-4-CE6-A96-E-D40-DFC452-B9-C.jpg) (https://postimg.cc/YhtdLN3F)

(https://i.postimg.cc/9wY1NzWz/DAD22-AB9-5328-42-F6-AB44-9748-C45-C837-F.jpg) (https://postimg.cc/9wY1NzWz)

(https://i.postimg.cc/HjwSLvQH/E06-B3-F18-0285-42-F0-AD95-78-AF457161-A9.jpg) (https://postimg.cc/HjwSLvQH)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on November 09, 2019, 09:55:07 PM
(https://i.postimg.cc/LgV8Q3KB/0-AB0-E2-CA-9889-4-F54-8031-2-E46-A483-DB13.jpg) (https://postimg.cc/LgV8Q3KB)

(https://i.postimg.cc/9rWMRKZx/32-C72053-7-DFD-4-D95-8-BD9-3-ACB7-ECC43-ED.jpg) (https://postimg.cc/9rWMRKZx)

(https://i.postimg.cc/MvdGy5Yz/80-B92-CD4-FE5-A-42-D3-BBEB-815-AAB80262-B.jpg) (https://postimg.cc/MvdGy5Yz)

(https://i.postimg.cc/23dy5rbb/C79-C1-C4-F-AD30-4-BE1-A824-780-F499-FF218.jpg) (https://postimg.cc/23dy5rbb)

(https://i.postimg.cc/Yv0C8FXY/E840-B902-5924-4-A19-B3-E7-8-F8339653-CD7.jpg) (https://postimg.cc/Yv0C8FXY)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on November 17, 2019, 07:54:19 PM
(https://i.postimg.cc/Vd0L64BG/2-BF8769-F-AC85-4-CC5-BE22-630797-DE3627.jpg) (https://postimg.cc/Vd0L64BG)

(https://i.postimg.cc/t1qjhzWH/341-CE6-CF-15-A2-4560-B14-F-7-EE22-C3-D752-F.jpg) (https://postimg.cc/t1qjhzWH)

(https://i.postimg.cc/6TyBjzSW/3-FD582-EA-4782-4943-8-A19-604-C01406-E24.jpg) (https://postimg.cc/6TyBjzSW)

(https://i.postimg.cc/dkDcft5H/4-A1-E700-D-3-EF9-4-C72-8-C11-F8-A41-F6021-AF.jpg) (https://postimg.cc/dkDcft5H)

(https://i.postimg.cc/RJ69WVf6/8-E173776-8-F68-4294-A90-B-E43-A0136-D7-B1.jpg) (https://postimg.cc/RJ69WVf6)

(https://i.postimg.cc/sGhdVHd5/945-B58-B1-7-E92-49-EF-8-D25-26614494558-B.jpg) (https://postimg.cc/sGhdVHd5)

(https://i.postimg.cc/WtCTQgLM/C43-CB03-E-1282-4913-BD0-B-DEAF2-D8-CB91-E.jpg) (https://postimg.cc/WtCTQgLM)

(https://i.postimg.cc/KK0yQgD3/E0-C99096-C77-E-427-F-B8-B5-ED3-EF3-D88-E1-A.jpg) (https://postimg.cc/KK0yQgD3)

(https://i.postimg.cc/xcmnY8nB/F4-BFF19-C-229-E-4-F04-8764-0-FCBB81-DBF8-D.jpg) (https://postimg.cc/xcmnY8nB)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on December 01, 2019, 09:36:03 AM
6tGBaUYZxOY
Title: Re: repair of an old stationary steam model
Post by: MJM460 on December 02, 2019, 06:46:01 AM
Hi Pavel,

Great to see a governor actually controlling the speed of the engine when you varied the load with your fingers on the flywheel.  It looks like you were also able to alter the set speed with the spring preload.

Really excellent work, right up with your normal high standard.  Really great to see.

MJM460

Title: Re: repair of an old stationary steam model
Post by: rarach22 on December 15, 2019, 06:14:29 AM
(https://i.postimg.cc/CRCNdnxr/292-DDFF3-F712-4916-B89-A-93-F890-B2-B83-F.jpg) (https://postimg.cc/CRCNdnxr)

(https://i.postimg.cc/PL42VvGv/498-FB39-C-6808-47-A9-AADF-E6277-B926643.jpg) (https://postimg.cc/PL42VvGv)

(https://i.postimg.cc/QVPSzrzm/500-ACF7-F-1793-4771-97-FF-ADBD49-CE681-A.jpg) (https://postimg.cc/QVPSzrzm)

(https://i.postimg.cc/YhW8KsKH/6277-EAAB-CF83-4-E46-9-A8-C-87-DA130-A2953.jpg) (https://postimg.cc/YhW8KsKH)
Title: Re: repair of an old stationary steam model
Post by: Roger B on December 15, 2019, 07:28:44 AM
Looking good  :praise2: Those pin gears are interesting  :)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on December 27, 2019, 10:05:53 PM
(https://i.postimg.cc/YhNpMFZD/08-B49698-0007-4-D6-F-9-A09-A31-E1-A4-CC4-AB.jpg) (https://postimg.cc/YhNpMFZD)

(https://i.postimg.cc/FY9hRRQr/091-FB70-A-FFF6-4-E1-B-9391-07-D4-B19805-A3.jpg) (https://postimg.cc/FY9hRRQr)

(https://i.postimg.cc/xk8Yv4CB/1-D861-C6-C-D05-F-4155-9-A85-8-FE7-F4335695.jpg) (https://postimg.cc/xk8Yv4CB)

(https://i.postimg.cc/crGsph98/37935-E90-0-D28-4-B45-A22-B-2-D874421-B513.jpg) (https://postimg.cc/crGsph98)

(https://i.postimg.cc/87tNrS1h/72736608-23-D1-44-A3-9-C95-2874-B09-EB116.jpg) (https://postimg.cc/87tNrS1h)

(https://i.postimg.cc/67bWFNg9/8620-B855-7-E92-4732-959-F-5-A8176-E4-C562.jpg) (https://postimg.cc/67bWFNg9)

(https://i.postimg.cc/ThDdNF96/961484-C6-9-B93-4908-85-B8-1-C9-EEF7-A2021.jpg) (https://postimg.cc/ThDdNF96)

(https://i.postimg.cc/xNM9kNCC/B98-B08-BB-E043-421-E-86-D2-AB0-BEEADE487.jpg) (https://postimg.cc/xNM9kNCC)

(https://i.postimg.cc/tZLXCN9w/E9-B22-B2-E-2-B16-414-C-94-A4-48-FBACC0-DEEF.jpg) (https://postimg.cc/tZLXCN9w)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on December 29, 2019, 05:34:41 PM
(https://i.postimg.cc/0rvxFgm7/3735-D7-AE-BAB9-4-CC1-A3-E4-BA710242-A0-BD.jpg) (https://postimg.cc/0rvxFgm7)

(https://i.postimg.cc/4mNG4zWd/4938198-C-66-BA-4866-8-E51-521-C8512-D604.jpg) (https://postimg.cc/4mNG4zWd)

(https://i.postimg.cc/BtCsGhck/4-CE72577-5-D44-49-FF-9-E32-B147-E29-C3-DFC.jpg) (https://postimg.cc/BtCsGhck)

(https://i.postimg.cc/2LG0XLW9/B1-A22-A5-B-DD24-40-BB-B78-A-4-E92-FAD3-C6-D9.jpg) (https://postimg.cc/2LG0XLW9)

(https://i.postimg.cc/WqT9nwdJ/C19969-E8-4566-45-BD-9-E1-A-11-C5-D69-FCEA0.jpg) (https://postimg.cc/WqT9nwdJ)

(https://i.postimg.cc/47C2KgZP/D6236948-7-E50-47-EA-AA8-E-93-E746-AA944-B.jpg) (https://postimg.cc/47C2KgZP)
Title: Re: repair of an old stationary steam model
Post by: rarach22 on December 30, 2019, 10:16:48 PM
I-uQ6JYqK2c
Title: Re: repair of an old stationary steam model
Post by: MJM460 on December 30, 2019, 11:00:36 PM
Another beautiful job Pavel.  Great to see it all running so well and looking so good.

Did you try a throttle valve and a pressure gauge on the water pump outlet to see what pressure it could produce?  Perhaps for a boiler feed pump?

MJM460

Title: Re: repair of an old stationary steam model
Post by: rarach22 on December 30, 2019, 11:22:03 PM
Another beautiful job Pavel.  Great to see it all running so well and looking so good.

Did you try a throttle valve and a pressure gauge on the water pump outlet to see what pressure it could produce?  Perhaps for a boiler feed pump?

MJM460

(https://i.postimg.cc/cK1CwB79/54-FB7-CF9-08-F4-40-ED-97-B5-4071-A07-F1399.jpg) (https://postimg.cc/cK1CwB79)

thank you, yes I plan to measure pressure, the boiler is drawn and everything will build up over time
Title: Re: repair of an old stationary steam model
Post by: Dave Otto on December 31, 2019, 12:36:01 AM
Wow, very nice Pavel!

Dave
Title: Re: repair of an old stationary steam model
Post by: fumopuc on December 31, 2019, 07:12:34 AM
Hi Pavel, a beauty and a very professional work, as usual.
Title: Re: repair of an old stationary steam model
Post by: rarach22 on January 13, 2020, 06:23:13 PM
(https://i.postimg.cc/kVdnCVYN/16-E00-CE8-734-F-4193-B5-EE-B9-F50-DAC3-F68.jpg) (https://postimg.cc/kVdnCVYN)

(https://i.postimg.cc/94tcQWs6/2915-FA58-83-E4-4-A05-9-D8-D-161-AE2-DE3667.jpg) (https://postimg.cc/94tcQWs6)

(https://i.postimg.cc/348YysTd/8-BB97-BB1-EB4-A-4-B65-B47-B-C36093-B3-C4-AB.jpg) (https://postimg.cc/348YysTd)

(https://i.postimg.cc/XGLNQV8f/B7-E7-DB00-0-E53-4239-9-AAE-4-EC316-E644-C8.jpg) (https://postimg.cc/XGLNQV8f)

(https://i.postimg.cc/Nyh00CFH/CCC97-FB6-1-C09-4-D49-8-A80-1-CBC1-C8-E07-D4.jpg) (https://postimg.cc/Nyh00CFH)

It is polished and painted. It remains to produce oil and steam lubricators, fence, wood floors ....
Title: Re: repair of an old stationary steam model
Post by: rarach22 on January 19, 2020, 09:01:20 AM
(https://i.postimg.cc/K1H0nHcW/B6-C7-A063-F199-4-DB8-AEFF-474797036-D5-D.jpg) (https://postimg.cc/K1H0nHcW)

(https://i.postimg.cc/xXCsN2QH/D64-F0-C0-E-58-A8-4465-91-A9-151-C41-B1-FFA8.jpg) (https://postimg.cc/xXCsN2QH)