Model Engine Maker

About MEM => Introduce Yourself => Topic started by: nats on January 23, 2019, 11:32:19 AM

Title: Hello from France
Post by: nats on January 23, 2019, 11:32:19 AM
Hello I'm Mehdi from France.
I recently discovered the passion of tiny engine while searching a good project to learn how to use a lathe and a mill.

I'm still looking around to find good starting project with simple motor, I red some topics on this forum and it totally
motivated me to register !

My goal is to design some engine myself later.
Title: Re: Hello from France
Post by: Roger B on January 23, 2019, 11:59:33 AM
Welcome to the Forum  :ThumbsUp:  :ThumbsUp:

There are plenty of examples of engines and a lot of help available here  :)
Title: Re: Hello from France
Post by: steamer on January 23, 2019, 12:00:16 PM
Welcome Mehdi!
Dave
Title: Re: Hello from France
Post by: b.lindsey on January 23, 2019, 01:18:08 PM
Hi and welcome Medhi. glad to have you join us.

Bill
Title: Re: Hello from France
Post by: nats on January 23, 2019, 02:42:51 PM
Wow thanks a lot for all your messages ! :)

I'll look to find good model for beginner and will ask in appropriate sub-forum :)
Title: Re: Hello from France
Post by: Chipswitheverything on January 23, 2019, 02:57:06 PM
Welcome Medhi, it would be interesting to know a little about what lathe and other tooling you will be using for your hobby.  This forum is a very friendly one and members will enjoy giving any help that they can.    Dave
Title: Re: Hello from France
Post by: glorfindel on January 23, 2019, 03:44:11 PM
Hello I'm Mehdi from France.
I recently discovered the passion of tiny engine while searching a good project to learn how to use a lathe and a mill.

I'm still looking around to find good starting project with simple motor, I red some topics on this forum and it totally
motivated me to register !

My goal is to design some engine myself later.
Salut, je suis du Quebec ;-)

Envoyé de mon SM-G965W en utilisant Tapatalk

Title: Re: Hello from France
Post by: Art K on January 23, 2019, 03:55:31 PM
Mehdi,
Welcome to the forum. You will find any number of suggestions for starter engines and advise should you require it. Good luck with your first engine.
Art
Title: Re: Hello from France
Post by: Kim on January 23, 2019, 06:30:27 PM
Hi Mehdi,
Welcome to the group!
Kim
Title: Re: Hello from France
Post by: nats on January 24, 2019, 11:23:20 AM
Welcome Medhi, it would be interesting to know a little about what lathe and other tooling you will be using for your hobby.  This forum is a very friendly one and members will enjoy giving any help that they can.    Dave

I'll use the few there are in a local HackerSpace "Electrolab", I'll note the reference next time I go there but it's some pretty big lathe and mill. A guy with some experience will show me the basics of working with those :)

Title: Re: Hello from France
Post by: Jim K 324 on January 26, 2019, 09:13:55 PM


    Welcome to the forum Mehdi !
   

           Jim
Title: Re: Hello from France
Post by: b.lindsey on February 03, 2019, 04:36:23 PM
Mehdi, I split your question and discussion on small lathes out and put it in the help on machines, tooling and fixtures section.

http://www.modelenginemaker.com/index.php?topic=8836.0