Model Engine Maker

Help! => Specific Engine Help => Topic started by: JR72 on July 03, 2018, 05:19:41 PM

Title: Ransome & May Mill engine
Post by: JR72 on July 03, 2018, 05:19:41 PM
Hi
I am thinking of having a go at building the Ransome  & May horizontal mill engine obtainable from Hemmingway. I can not find any details of anyone building this engine and wondered as there has been quite a few comments on the quality of castings lately if anyone had any experience with this set of castings. Any advice or comments will be gratefully received.

Many thanks

JR72
Title: Re: Ransome & May Mill engine
Post by: Jasonb on July 03, 2018, 05:24:32 PM
There is a member who seldom posts who has made this engine so not sure if you will get a reply from him, it is his engine in the photos and video on Hemmingways site as are most of the other external combustion engines.
Title: Re: Ransome & May Mill engine
Post by: Jo on July 03, 2018, 05:25:45 PM
Chris ( Modelsteam) has made that model engine.   I have not seen him around much  :noidea: Try sending him a PM.

Jo

P.S. He was on line this morning so you might be lucky  ;)
Title: Re: Ransome & May Mill engine
Post by: JR72 on July 04, 2018, 07:52:35 AM
Many thanks Jo and Jason I will keep trying.

JR72