Model Engine Maker

Help! => Specific Engine Help => Topic started by: gbritnell on October 27, 2017, 10:34:45 PM

Title: Wall 4 engine drawings
Post by: gbritnell on October 27, 2017, 10:34:45 PM
I am repairing an Elmer Wall 4 cylinder engine for a fellow. There are some missing pieces that I can't fake so I'm asking if anyone has drawings. This engine has a 1.00 bore.
gbritnell
Title: Re: Wall 4 engine drawings
Post by: tvoght on October 28, 2017, 12:16:00 AM
George,
  I have 4 cylinder E. A. Wall engine plans I bought from Cole's Power Models some time ago. 1" bore and stroke. What can I do for you?

--Tim
Title: Re: Wall 4 engine drawings
Post by: b.lindsey on October 28, 2017, 12:16:44 AM
Can't help with the drawings George, but four 1 inch cylinders is a sizeable engine  :o

Bill
Title: Re: Wall 4 engine drawings
Post by: gbritnell on October 28, 2017, 12:45:50 AM
HI Tim,
I need the details of the oil pump and valve assemblies, keepers, springs etc.
I will send you a PM my email address.
Thanks,
George