Model Engine Maker

Engines => Your Own Design => Topic started by: Astro-Eric on March 31, 2017, 04:03:34 PM

Title: Mini V-8
Post by: Astro-Eric on March 31, 2017, 04:03:34 PM
While working as engineering manager (paper pusher), I needed something that was technically challenging.  So at lunch, I began to eat at my desk and started designing my own v-8 engine.  This is my own design of a SOHC engine.  I have a lot of the parts made.  But from the time I first got started to now, I've purchased a CNC milling machine.  So the opportunities to make parts better is there.  I've started re-designing some of the parts for CNC work.  One is the intake.  I decided to run 8 small carbs that I redesigned from plans I bought from Jerry Howell.  It's really overkill, but I thought it would look better and be lot more challenging.  Progress is slow, but I have made some...

Please feel free to take a look at what I have done so far by clicking HERE (http://www.ericchesak.com/Galleries/DIY/Mini-V8/)

The crank was done on my 1932 Southbend lathe that my Grandfather bought new. I have 2 lathes, but it's the only one that is set-up to turn between centers.   The last 2 photos are more recent parts that I completed on the CNC.  The last photo is one of the carbs that I did as a prototype on the 4th axis.  This allowed me to machine 4 of the 6 sides in one set-up.

Comments, suggestions or complaints are always welcome.

Thanks for looking,

Eric

(https://photos.smugmug.com/Galleries/DIY/Mini-V8/i-Z5NrWsJ/0/M/DSCN3033a-M.jpg) (http://www.ericchesak.com/Galleries/DIY/Mini-V8/i-Z5NrWsJ/A)

Title: Re: Mini V-8
Post by: gbritnell on March 31, 2017, 05:38:45 PM
I'm not telling you that you shouldn't do it but carburetion on these small engines is hard enough to sort out even just using one. I would recommend starting with one to sort out all the bugs and then modify from there. Oh and I went to your link and looked at your construction photos. Nice work!
gbritnell
Title: Re: Mini V-8
Post by: mnay on March 31, 2017, 07:24:43 PM
Beautiful work.  Keep us posted as you build
I don't like  work with anything smaller than a #4 screw.  Don't know how you do it.
Mike
Title: Re: Mini V-8
Post by: Roger B on March 31, 2017, 08:04:07 PM
Excellent work, but having had significant problems getting a single to run I echo Georges comments (I am now adding to my problems by working on fuel injection  ::) )
Title: Re: Mini V-8
Post by: cfellows on April 18, 2017, 03:20:28 AM
Very nice work, indeed.

Chuck