Model Engine Maker

Supporting => Casting => Topic started by: airmodel on September 16, 2016, 01:49:54 AM

Title: Crucible camera pouring cast iron.
Post by: airmodel on September 16, 2016, 01:49:54 AM
Hi everyone.

I have always wanted to mount a camera on my pouring trolley but because getting someone with good camera skills when I need them can be difficult. It turned out so well I wished I had done this a lot earlier. Really great results can be expected using cheap green sand, the plaques came out excellent in cast iron. Have a look at the video.   fQ4nw_KTyEM
Title: Re: Crucible camera pouring cast iron.
Post by: crueby on September 16, 2016, 02:21:53 AM
That worked great! Thanks for the look at the process.   :cheers:
Title: Re: Crucible camera pouring cast iron.
Post by: philjoe5 on September 16, 2016, 02:48:56 AM
Great video, thanks for sharing this :ThumbsUp:.  Not something I'd get to see very often

Cheers,
Phil