Model Engine Maker

The Showcase => Shows => Topic started by: kvom on December 25, 2018, 05:29:22 PM

Title: Cabin Fever 2019 - Jan 18-20
Post by: kvom on December 25, 2018, 05:29:22 PM
I just made my reservations.  Not exhibiting this year as I'm flying up.
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Dreeves on December 25, 2018, 11:29:52 PM
Already got my room. I will be there Friday Morning. Can’t wait to see all of you again.

Dave
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: crueby on December 25, 2018, 11:34:46 PM
Wont be there this year, hope to be back again next year, had a great time there last year! (dizzy yet? Sounds like a back-to-the-future movie).
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Art K on December 26, 2018, 12:48:58 AM
Well it looks as though we will be visiting my in laws  and I will be there for Friday & Saturday. I will soon be getting things ready, Once I am done with the Christmas & family visiting mode.
Art
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: cheepo45 on December 26, 2018, 01:43:05 AM
I'll be there Friday morning.
Looking forward to seeing everyone!
 Scott
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: RonGinger on December 26, 2018, 03:17:57 AM
I will be there Friday morning and right through Sunday, although maybe not till the last minute on Sunday- its a 10 hour drive home and sometimes I like to make it Sunday night. I will watch the weather to decide.

I have a new model boat this year, but no new engine.
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Trevorc on December 26, 2018, 11:06:13 AM
I though cabin fever was an ailment brought about by prolonged periods indoors over winter period.
But what is Cabin Fever 2019. Can somebody tell this Brit what it is all about, i guess engines come into it somewhere.
Trevorc
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: wagnmkr on December 26, 2018, 12:36:41 PM
It is a model engine exhibition and more ....

https://tradeshowz.com/cabin-fever-expo

Cheers
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: crueby on December 26, 2018, 02:55:55 PM
Here is the homepage for the show with full info. Great show!


http://www.cabinfeverexpo.com
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: ART on December 26, 2018, 04:47:36 PM
   Looking forward to another Cabin Fever Show. I will be there about 11:00 AM Friday. Does anybody know what the " featured" model will be ?
   Earl
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: 90LX_Notch on December 27, 2018, 09:11:33 PM
As long as we do not get a major weather event; I will be there Saturday.  Is there going to be a MEM table again this year?  If so, I only need one table and a chair.

-Bob
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: zeeprogrammer on December 27, 2018, 11:09:41 PM
I'm planning on going. No guarantee.
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Dreeves on December 31, 2018, 02:08:10 AM
Waiting on my buddy Bill Lindsey to say he is coming. I guess that since he is retired he would be attending.

Dave
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Craig DeShong on January 06, 2019, 11:29:53 PM
I'm planning on getting there Friday morning.  I'm just bringing my Otto Langen this year.  I'd like to set up with the MEM group so please let me know.  If I could get a 3 foot square of floor space at a table end for my own table that would be great.  The Otto Langen can hit pretty hard, I'd hate to have it on one of the tables and interfere with the other exhibitors.
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Dreeves on January 06, 2019, 11:54:18 PM
There will be several members there flrst thing Friday. We will reserve spots for our members. Looking forward to seeing everyone

Dave
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: b.lindsey on January 07, 2019, 01:06:44 AM
Dave, unfortunately the wife's health will keep me from attending this year. I will miss you guys and be there in spirit if not in person.  Hope you all have a great time and take lots of pictures.

Bill
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: cheepo45 on January 07, 2019, 01:54:51 AM
We will miss you at Cabin Fever, Bill.
 Family comes first.
 Scott
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Dreeves on January 07, 2019, 03:00:29 AM
Bill we will miss you. As others have said family comes first. Hope all is well.

Dave
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: 90LX_Notch on January 14, 2019, 10:26:07 PM
Sorry to hear that you can't make CF Bill.

After weeks of decent weekends, it looks like we are going to get a real storm this coming weekend.  Looks like I will miss CF yet again this year due to weather.  It's such a shame it's not in April.  I would never miss one. 

There's always next year.  Safe travels to all attending.

-Bob
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: b.lindsey on January 15, 2019, 12:46:20 AM
Thanks guys. I had really hoped to get back to CF this year, and I will miss seeing all of you most definitely. I hope the weather will hold out and that you all have a great time and safe travels. Pictures please  :)

Bill
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: b.lindsey on January 20, 2019, 12:52:53 AM
How's it going guys? Any reports from the show?

Bill
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Art K on January 20, 2019, 02:14:32 AM
Bill,
The weather held out till evening, probably about the time they all leaving from dinner. I was on my own & didn't know what plans my wife made for the evening, so I declined the dinner invite as I'd have needed to get my wife then return. Maybe next time. Hope to post some photos later. Couldn't find the gang when I arrived so ended setting up next to Ron Colonna.
Art
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: b.lindsey on January 20, 2019, 03:06:03 AM
Thanks Art. Will look forward to the pictures.

Bill
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Craig DeShong on January 20, 2019, 02:01:52 PM
Arrived Thursday and set up with the MEM group.  Met some new folks and got to associate some faces with names.  I heard that attendance was up from last year, despite the weather.
Photos of the MEM group.
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Craig DeShong on January 20, 2019, 02:14:09 PM
Another photo of the MEM tables.
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: b.lindsey on January 20, 2019, 02:16:29 PM
Good to hear Craig, an thanks for the pictures. Hope everyone has safe travels home!!

Bill
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: kvom on January 20, 2019, 06:29:34 PM
Fewer exhibitors and vendors this year, presumably deterred by the weather.  I found out Saturday evening that SW was offering to let its DC area bookings change to earlier flights free of charge to avoid the storm.  I change to an 8:50 flight from BWI.  Left Lebanon at 4:00am in light rain.  Some fog but luckily no traffic to speak of.

The only goodies I found to buy are 4 6" steel rules with metric on one side and inches on the other.
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Tin Falcon on January 20, 2019, 07:02:51 PM
Seemed like a few less table in the room I set up in. arrived around noon on Friday set up the engines . Had them running on air Friday .
so a bit more interest in the display than past years. And a decent turn out on saterday.  We ended up bailing around 4 on Saturday the crowds had thinned by then and did  not want to get caught in the storm. The storm apparently just skirted the venue . The main concern was the varied and vasalating weather report  even from  one reliable source. purchased a few goodies and am home safe.
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: cheepo45 on January 20, 2019, 08:18:57 PM
I had a great time at the show.
Met several other MEM members for the first time and saw a lot of old friends.
The turnout was much better than I expected for Saturday, although Sunday was pretty empty
All in all a good show-my engines ran pretty much the whole show (with a few minor repairs), and I talked to a lot of interested people.
 Scott
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Art K on January 20, 2019, 08:55:55 PM
Ok, here's a fuller report since last night. I had set up next to Ron and across the isle was this 426 hemi.
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144418.jpg)
I must admit that it really made an impressive sound. He had an RC midget car driven by a Sealion engine.
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144430.jpg)
This one he started by putting it in gear and spinning the back tire. I was told (If I recall properly) the midget spins at 11000+ rpm and the Hemi 8700ish rpm.The next couple were down the table from me.
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144332.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144253.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144322.jpg)
On the other side of Ron were these engines
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_160220.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_160242.jpg)
I'd like to add the following note to the following engine. Although it might look like a take off of the Henry Ford motor, it was an exercise to show that an engine could be made with simple hand tools and a drill press. It was a two stroke water cooled, that is a piece soldered together and slid onto the cylinder. The piston is made of JB Weld packed into an oiled copper tube the same size as the cylinder. I asked him how fast it was running and he stuck a digital tach on it 2800rpm, I was quite impressed. The crank was made of a pair of studs clamping onto the shaft and extending out the other side for the counter weight, I can only assume he added nuts onto it until he achieved some sort of balance. the only part turned in a lathe was the flywheel.
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144347.jpg)
Across the isle next to the hemi was these ones.
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144613.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144542.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144513.jpg)
and then there was this intriguing piston machining fixture he made
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144529.jpg)
Well that's all for now or else I'll have a novel here. All these engines were within 50' of me.
Art
PS. I once again neglected to take any photos of my self or engines :wallbang:


Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: b.lindsey on January 20, 2019, 09:53:11 PM
Thanks for the reports guys!!

Bill
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Dave Otto on January 20, 2019, 09:58:01 PM
Thanks for the pictures guys,

Art the fuel tank for the engine in the 10th picture is a very nice piece of work.

Dave
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Art K on January 20, 2019, 10:30:44 PM
Dave,
His stuff was all titled Brian's Barn. Impressive stuff. The engine with the nice blower housing is a rotary valve V4, the aluminum housing is welded. Quite a work of art.
Art
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: zeeprogrammer on January 21, 2019, 10:05:25 PM
  :cussing:Dad blast it. For some reason I thought the show was this weekend.
This retirement gig is messing with me.

Thanks for all the pictures.  :ThumbsUp:
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: maury on January 23, 2019, 02:44:04 PM
Guys, thanks for the pictures and comments. A heads up, Gil posted 3 really nice and comprehensive videos of the show on the Smokstak board.

Cabin Fever is just too long a drive for me, but I might make it to NAMES this year. I have a lot to show.

maury
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Art K on January 23, 2019, 05:57:28 PM
Here's a few more to tease you all with.
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_160306.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_152753.jpg)
This guy was making a 3D print version of a John Deere B engine. In quarter and eighth scale
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_145732.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_145708.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_145630.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_145604.jpg)
the Bulldog according to the video does steer by the rear wheels
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_145521.jpg)
there seems to be a minor problem with the tracks on this steam shovel
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_145116.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_145048.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144840.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144805.jpg)
(http://listerengine.com/coppermine/albums/userpics/10019/20190119_144747.jpg)
Well that will have to do it for now, enjoy
Art
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Art K on January 23, 2019, 06:28:33 PM
Now you tube is finished processing the videos. here is the 426 Hemi making a run.
https://www.youtube.com/watch?v=rzbstP7CU1A
and here is the startup procedure on the midget
https://www.youtube.com/watch?v=4cS6bqYPhkM
Art
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: crueby on January 23, 2019, 06:31:51 PM
Great pics/vids Art - thanks!
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: b.lindsey on January 23, 2019, 07:21:45 PM
More eye candy!! Thanks Art.

Bill
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: JC54 on January 23, 2019, 08:31:14 PM
Many thanks for the great pictures. The sound of the "Hemi" took me straight back to Santa Pod (UK dragstrip) John
Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: Steve17 on January 23, 2019, 09:42:42 PM
Really appreciate the pictures and videos.

Steve.

Title: Re: Cabin Fever 2019 - Jan 18-20
Post by: zeeprogrammer on January 23, 2019, 10:26:35 PM
Thanks very much for the pics and videos. Almost like being there. Almost.
SimplePortal 2.3.5 © 2008-2012, SimplePortal