Model Engine Maker
About MEM => Introduce Yourself => Topic started by: nats on January 23, 2019, 11:32:19 AM
-
Hello I'm Mehdi from France.
I recently discovered the passion of tiny engine while searching a good project to learn how to use a lathe and a mill.
I'm still looking around to find good starting project with simple motor, I red some topics on this forum and it totally
motivated me to register !
My goal is to design some engine myself later.
-
Welcome to the Forum :ThumbsUp: :ThumbsUp:
There are plenty of examples of engines and a lot of help available here :)
-
Welcome Mehdi!
Dave
-
Hi and welcome Medhi. glad to have you join us.
Bill
-
Wow thanks a lot for all your messages ! :)
I'll look to find good model for beginner and will ask in appropriate sub-forum :)
-
Welcome Medhi, it would be interesting to know a little about what lathe and other tooling you will be using for your hobby. This forum is a very friendly one and members will enjoy giving any help that they can. Dave
-
Hello I'm Mehdi from France.
I recently discovered the passion of tiny engine while searching a good project to learn how to use a lathe and a mill.
I'm still looking around to find good starting project with simple motor, I red some topics on this forum and it totally
motivated me to register !
My goal is to design some engine myself later.
Salut, je suis du Quebec ;-)
Envoyé de mon SM-G965W en utilisant Tapatalk
-
Mehdi,
Welcome to the forum. You will find any number of suggestions for starter engines and advise should you require it. Good luck with your first engine.
Art
-
Hi Mehdi,
Welcome to the group!
Kim
-
Welcome Medhi, it would be interesting to know a little about what lathe and other tooling you will be using for your hobby. This forum is a very friendly one and members will enjoy giving any help that they can. Dave
I'll use the few there are in a local HackerSpace "Electrolab", I'll note the reference next time I go there but it's some pretty big lathe and mill. A guy with some experience will show me the basics of working with those :)
-
Welcome to the forum Mehdi !
Jim
-
Mehdi, I split your question and discussion on small lathes out and put it in the help on machines, tooling and fixtures section.
http://www.modelenginemaker.com/index.php?topic=8836.0