Model Engine Maker

Supporting => Engine Ancillaries => Topic started by: Mosey on December 13, 2012, 12:55:09 AM

Title: Sparkplugs
Post by: Mosey on December 13, 2012, 12:55:09 AM
I have 1/4 x 32 threads in the head. What plugs are available to fit this?
Title: Re: Sparkplugs
Post by: V 45 on December 13, 2012, 01:31:19 AM
Mosey,
You can try these folks...not affiliated...I'm sure there are more out there too...
http://www.cncengines.com/rc.html
or...
http://sparkplugs.morrisonandmarvin.com/14-32.php

Dave
Title: Re: Sparkplugs
Post by: Don1966 on December 13, 2012, 02:54:38 AM
Mosey you can also get the spark plug from Margret Shore where you bought the casting. Or Jerry Howell site.

Don
Title: Re: Sparkplugs
Post by: Mosey on December 13, 2012, 03:00:55 AM
Thanks for the information on the plugs. I will follow up with those sources. I have 1 Rimfire from my Farm Engine.
I will be back later with a question about the suggested ignition systems. I have a points and coil system also, made by Modelectric, that I might use if it will work for a 2 cylinder engine.
Title: Re: Sparkplugs
Post by: stevehuckss396 on December 13, 2012, 04:00:05 AM
I have had Dales plugs in my Peewee for years and they are still working like new.

http://www.daledetrich.com/
SimplePortal 2.3.5 © 2008-2012, SimplePortal