Model Engine Maker
Supporting => Tooling & Machines => Topic started by: steamer on July 20, 2019, 11:49:10 AM
-
I was able to win a "Bay" auction on a MLA rear mounted cut off tool tool post. this post is specifically designed to be mounted on their T slotted cross slide, which Samantha bell has. It dropped right in! I was pumped! The only issue was it was made for the Light 10 and not the 9, so I needed to shorten it about 3/8 of an inch. I did that yesterday, and it's perfect....
Check off another "I always wanted that tool"
Dave
-
That’s cool Dave your going to enjoy using it I like mine...... :ThumbsUp:
:cheers:
Don