Model Engine Maker
Engines => Your Own Design => Topic started by: rarach22 on September 28, 2015, 09:36:34 PM
-
the first drawings of the straight line engine steam engine
(http://s2.postimg.org/9x74f0hbp/image.jpg) (http://postimg.org/image/9x74f0hbp/)
(http://s2.postimg.org/n02qya7jp/image.jpg) (http://postimg.org/image/n02qya7jp/)
(http://s2.postimg.org/gl3q1m0tx/image.jpg) (http://postimg.org/image/gl3q1m0tx/)
(http://s30.postimg.org/za7irogkt/image.jpg) (http://postimg.org/image/za7irogkt/)
-
Hi Pavel, good to see the layout of your new engine in your CAD. Waiting for the first swarf.
-
Hi Pavel, I look forward to another good project. A challenging time ahead, one that will be met. Cheers, Hugh.
-
Hi Pavel, I look forward to another good project. A challenging time ahead, one that will be met. Cheers, Hugh.
-
This should be a nice, compact, engine. I'm curious about where the makers tapped off for power. In practice was one end of the shaft long enough to install a belt pully?
Alan
-
Pavel- I'm especially interested in this engine as I see that it was made in Syracuse NY. I'm about 15 minutes from Syracuse.
I did some research on this company and it's history. I could not find a lot, but did come to learn that the person who desinged it
was associated with Cornell College IIRC, as a proessor of mech engineering and started a company too make the engines and castings.
Actually, Syracuse had a lot of little start ups like this back in the day.
Sid
-
Interesting engine - more here:
http://vintagemachinery.org/mfgindex/imagedetail.aspx?id=10903 (http://vintagemachinery.org/mfgindex/imagedetail.aspx?id=10903)
details of the casting in this one:
http://vintagemachinery.org/mfgindex/imagedetail.aspx?id=5573 (http://vintagemachinery.org/mfgindex/imagedetail.aspx?id=5573)
-
Test before milting...
https://www.youtube.com/watch?v=zqWBa9_A4w8
-
Hi Pavel,
Wonderful plate engraving of this engine above. It is motivating in itself to make you want to build the real thing.
Those old engravings were beautifully done.
This engine looks very efficient. You would wonder why they did not catch on in the mills and factories of the time.
Cheers...John
-
(http://s28.postimg.org/5fb21m5rd/image.jpg) (http://postimg.org/image/5fb21m5rd/)
(http://s28.postimg.org/ntll5li21/image.jpg) (http://postimg.org/image/ntll5li21/)
-
Progress! Looks nice. :ThumbsUp:
Dave
-
(http://s4.postimg.org/yeo0kx0w9/image.jpg) (http://postimg.org/image/yeo0kx0w9/)
-
Hi Pavel, looks good. What was the running time of this operation ?
One corner seems to be very thin, what will be added there ?
-
(http://s23.postimg.org/tslyan8if/image.png) (http://postimg.org/image/tslyan8if/)
(http://s23.postimg.org/y0c55nkk7/image.png) (http://postimg.org/image/y0c55nkk7/)
Sry for my english, after complet these conor ,will be on the top cover
-
(http://s30.postimg.org/re46qg6ql/image.jpg) (http://postimg.org/image/re46qg6ql/)
-
Beautiful engines and support works!
:NotWorthy: :NotWorthy:
Pete
-
From the engravings there were apparently two different governors: one spring loaded on the flywheel(s) and one gravity type about center frame. Which one are you doing, Pavel?
:facepalm2:
I went back and looked at your opening entry and see that you are planning on the flywheel governor.
Alan
-
(http://s18.postimg.org/t223c3d9x/image.jpg) (http://postimg.org/image/t223c3d9x/)
(http://s18.postimg.org/4k9zo7aph/image.jpg) (http://postimg.org/image/4k9zo7aph/)
(http://s18.postimg.org/cbqpmreut/image.jpg) (http://postimg.org/image/cbqpmreut/)
-
From the engravings there were apparently two different governors: one spring loaded on the flywheel(s) and one gravity type about center frame. Which one are you doing, Pavel?
:facepalm2:
I went back and looked at your opening entry and see that you are planning on the flywheel governor.
Alan
Yes that's right, inside flywheel. Pavel
-
Hi Pavel,
You're doing a really great job. I was about to ask you what the notch on the top of the main frame was ment for but your drawings provide the answer. The notch is giving clearance for the stuffing box:
(http://s23.postimg.org/y0c55nkk7/image.png)
-
(http://s27.postimg.org/wzl86xhdb/image.jpg) (http://postimg.org/image/wzl86xhdb/)
(http://s27.postimg.org/l92pbsz73/image.jpg) (http://postimg.org/image/l92pbsz73/)
(http://s27.postimg.org/z1h47fpyn/image.jpg) (http://postimg.org/image/z1h47fpyn/)
(http://s27.postimg.org/7plv63l7z/image.jpg) (http://postimg.org/image/7plv63l7z/)
(http://s27.postimg.org/rvpd4zgvj/image.jpg) (http://postimg.org/image/rvpd4zgvj/)
-
Quietly watching, Pavel.
Always quality work to see here.
-
Nice Machine work and fabrication Pavel.
Dave
-
(http://s28.postimg.org/4y9jbj0g9/image.jpg) (http://postimg.org/image/4y9jbj0g9/)
(http://s28.postimg.org/t0qd6eh3d/image.jpg) (http://postimg.org/image/t0qd6eh3d/)
it's going slowly Pavel
-
(http://s21.postimg.org/btw3veqw3/image.png) (http://postimg.org/image/btw3veqw3/)
(http://s21.postimg.org/yhbd1k6g3/image.png) (http://postimg.org/image/yhbd1k6g3/)
Valve
-
(http://s24.postimg.org/59swyo4wx/image.jpg) (http://postimg.org/image/59swyo4wx/)
(http://s24.postimg.org/no3g2nh7l/image.jpg) (http://postimg.org/image/no3g2nh7l/)
::) ::) ::) ::) ::)
-
Hi Pavel, not an easy to make part. Looking good.
-
(http://s10.postimg.org/bpfa0m9lx/image.jpg) (http://postimg.org/image/bpfa0m9lx/)
(http://s10.postimg.org/hax3qxkx1/image.jpg) (http://postimg.org/image/hax3qxkx1/)
:pinkelephant:
-
(http://s12.postimg.org/sahdzk0jt/image.jpg) (http://postimg.org/image/sahdzk0jt/)
(http://s12.postimg.org/j1f7pfrnt/image.jpg) (http://postimg.org/image/j1f7pfrnt/)
(http://s12.postimg.org/bwxegekeh/image.jpg) (http://postimg.org/image/bwxegekeh/)
(http://s12.postimg.org/7miqktfbd/image.jpg) (http://postimg.org/image/7miqktfbd/)
(http://s12.postimg.org/6iym8uuo9/image.jpg) (http://postimg.org/image/6iym8uuo9/)
:pinkelephant: :cartwheel: :pinkelephant: :cartwheel: :pinkelephant: :cartwheel: :pinkelephant: :cartwheel: :pinkelephant:
-
Beautiful work, Pavel. :ThumbsUp:
Your skill and workmanship is amazing.
-
Thank you, the stainless steel mills really bad Pavel
-
Just catching up with your progress Pavel. As Zee said, lovely work on all of it.
Bill
-
(http://s8.postimg.org/wop76tvi9/image.jpg) (http://postimg.org/image/wop76tvi9/)
(http://s8.postimg.org/4ajrmy7y9/image.jpg) (http://postimg.org/image/4ajrmy7y9/)
:stir:
-
(http://s28.postimg.org/f1tss9qmx/image.jpg) (http://postimg.org/image/f1tss9qmx/)
(http://s28.postimg.org/4t1bmg2l5/image.jpg) (http://postimg.org/image/4t1bmg2l5/)
(http://s28.postimg.org/8dx75o74p/image.jpg) (http://postimg.org/image/8dx75o74p/)
(http://s28.postimg.org/7xbzj8jdl/image.jpg) (http://postimg.org/image/7xbzj8jdl/)
(http://s28.postimg.org/m2hsl1sex/image.jpg) (http://postimg.org/image/m2hsl1sex/)
(http://s28.postimg.org/4zf0pjbq1/image.jpg) (http://postimg.org/image/4zf0pjbq1/)
(http://s28.postimg.org/ysm0y50d5/image.jpg) (http://postimg.org/image/ysm0y50d5/)
(http://s28.postimg.org/9wnzwwobd/image.jpg) (http://postimg.org/image/9wnzwwobd/)
:ROFL:
-
That's some very nice fabrication :praise2: :praise2:
-
(http://s14.postimg.org/4ke4oiv65/image.jpg) (http://postimg.org/image/4ke4oiv65/)
(http://s14.postimg.org/x8r2rqxcd/image.jpg) (http://postimg.org/image/x8r2rqxcd/)
(http://s14.postimg.org/sycew5s99/image.jpg) (http://postimg.org/image/sycew5s99/)
(http://s14.postimg.org/xvpzh9u8d/image.jpg) (http://postimg.org/image/xvpzh9u8d/)
UF...... :cussing:
-
(http://s16.postimg.org/u4a44cakh/image.jpg) (http://postimg.org/image/u4a44cakh/)
(http://s16.postimg.org/a8e4ostj5/image.jpg) (http://postimg.org/image/a8e4ostj5/)
(http://s16.postimg.org/466hyb535/image.jpg) (http://postimg.org/image/466hyb535/)
(http://s16.postimg.org/7oihup5z5/image.jpg) (http://postimg.org/image/7oihup5z5/)
(http://s16.postimg.org/6kydiqlc1/image.jpg) (http://postimg.org/image/6kydiqlc1/)
:stir:
-
(http://s22.postimg.org/flx0u8pvx/image.jpg) (http://postimg.org/image/flx0u8pvx/)
(http://s22.postimg.org/5n7gu0r2l/image.jpg) (http://postimg.org/image/5n7gu0r2l/)
(http://s22.postimg.org/wjrg2c9vx/image.jpg) (http://postimg.org/image/wjrg2c9vx/)
(http://s22.postimg.org/wihi8x825/image.jpg) (http://postimg.org/image/wihi8x825/)
:DrinkPint:
-
That's a lot of brass swarf ::)
-
Glad to see you're still at it. That part came out great. :ThumbsUp:
-
(http://s22.postimg.org/dxewe9pnx/image.jpg) (http://postimg.org/image/dxewe9pnx/)
(http://s22.postimg.org/v9f8zpj59/image.jpg) (http://postimg.org/image/v9f8zpj59/)
(http://s22.postimg.org/sqtjz0xf1/image.jpg) (http://postimg.org/image/sqtjz0xf1/)
:headscratch:
-
for the continuation of the work I had to buy new tools, walter 1962 and tilting table made in CZ 3000,-Kč
older grinding machine needed a refurbish but is great
(http://s23.postimg.org/t80wqy5mf/image.jpg) (http://postimg.org/image/t80wqy5mf/)
(http://s23.postimg.org/rey02mkfr/image.jpg) (http://postimg.org/image/rey02mkfr/)
(http://s23.postimg.org/rt4dzcauv/image.jpg) (http://postimg.org/image/rt4dzcauv/)
-
Looks like nice additions to your shop.
Still watching! :popcorn:
-
(http://s32.postimg.org/wtrbezqi9/image.jpg) (http://postimg.org/image/wtrbezqi9/)
(http://s32.postimg.org/3smz5l629/image.jpg) (http://postimg.org/image/3smz5l629/)
(http://s32.postimg.org/g3fxpns35/image.jpg) (http://postimg.org/image/g3fxpns35/)
(http://s32.postimg.org/5s3kx00dt/image.jpg) (http://postimg.org/image/5s3kx00dt/)
(http://s32.postimg.org/f8te3mk8h/image.jpg) (http://postimg.org/image/f8te3mk8h/)
(http://s32.postimg.org/ryskjllv5/image.jpg) (http://postimg.org/image/ryskjllv5/)
:shrug:
-
Good to see an update. It's coming along very well.
--TIm
-
:ThumbsUp: :ThumbsUp: :wine1:
-
(https://s16.postimg.org/50j30lfkx/image.jpg) (https://postimg.org/image/50j30lfkx/)
(https://s16.postimg.org/6437ck081/image.jpg) (https://postimg.org/image/6437ck081/)
(https://s16.postimg.org/ijzx6atk1/image.jpg) (https://postimg.org/image/ijzx6atk1/)
(https://s16.postimg.org/rt23gf2g1/image.jpg) (https://postimg.org/image/rt23gf2g1/)
(https://s16.postimg.org/fsgnfov1d/image.jpg) (https://postimg.org/image/fsgnfov1d/)
free photo hosting (https://postimage.org/)
-
Still following along Pavel. Nice progress since I last checked in!
Bill
-
(https://s14.postimg.org/9mvicdsvh/image.jpg) (https://postimg.org/image/9mvicdsvh/)
(https://s14.postimg.org/ul1oagsq5/image.jpg) (https://postimg.org/image/ul1oagsq5/)
(https://s14.postimg.org/ix7mfx3l9/image.jpg) (https://postimg.org/image/ix7mfx3l9/)
posted image (https://postimage.org/)
;)
-
Very nice fabrication :ThumbsUp: :ThumbsUp:
-
(https://s13.postimg.org/bf7rt03mr/IMG_3494.jpg) (https://postimg.org/image/bf7rt03mr/)
(https://s13.postimg.org/h4o0db9sz/IMG_3495.jpg) (https://postimg.org/image/h4o0db9sz/)
upload pic (https://postimage.org/)
-
https://www.youtube.com/watch?v=GVq3gTr23TI
-
Nice use of CNC on the flywheel :ThumbsUp: :ThumbsUp:
-
https://s16.postimg.org/mlortitt1/IMG_3522.jpg
-
(https://s16.postimg.org/figwdwodd/IMG_3522.jpg) (https://postimg.org/image/figwdwodd/)
-
Looking good so far :)
-
(https://s22.postimg.org/jgroucxgt/IMG_3529.jpg) (https://postimg.org/image/jgroucxgt/)
(https://s22.postimg.org/gbbohw48d/IMG_3530.jpg) (https://postimg.org/image/gbbohw48d/)
image hoster (https://postimage.org/) :cartwheel:
-
Hi Pavel, it is taking shape. Nice progress.
-
(https://s27.postimg.org/96opuyi0f/IMG_3571.jpg) (https://postimg.org/image/96opuyi0f/)
(https://s27.postimg.org/4yyizy5yn/IMG_3572.jpg) (https://postimg.org/image/4yyizy5yn/)
(https://s27.postimg.org/px4oy15tb/IMG_3573.jpg) (https://postimg.org/image/px4oy15tb/)
forum image hosting (https://postimage.org/)
:cartwheel: :cartwheel: :cartwheel:
-
Looks like you are making great progress Pavel; nice looking base construction too.
Dave
-
(https://s23.postimg.org/n4lg9ej3r/IMG_3539.jpg) (https://postimg.org/image/n4lg9ej3r/)
(https://s23.postimg.org/qcpxmg5dj/IMG_3593.jpg) (https://postimg.org/image/qcpxmg5dj/)
(https://s23.postimg.org/ckbiqtelz/IMG_3594.jpg) (https://postimg.org/image/ckbiqtelz/)
picture uploading (https://postimage.org/)
-
Hi Pavel, a good step forwards.
Its a monster project with this double packs.
-
(https://s23.postimg.org/zdlmxoq93/IMG_0072.jpg) (https://postimg.org/image/zdlmxoq93/)
(https://s23.postimg.org/l8ftvvh7r/IMG_0073.jpg) (https://postimg.org/image/l8ftvvh7r/)
(https://s23.postimg.org/97yz8vz6v/IMG_0074.jpg) (https://postimg.org/image/97yz8vz6v/)
(https://s23.postimg.org/csuus43qf/IMG_0075.jpg) (https://postimg.org/image/csuus43qf/)
(https://s23.postimg.org/c4m09650n/IMG_0076.jpg) (https://postimg.org/image/c4m09650n/)
screen capture windows 7 (https://postimage.org/app.php)
:cartwheel: :cartwheel: :cartwheel:
-
(https://s29.postimg.org/7tzhxkh2b/IMG_0215.jpg) (https://postimg.org/image/7tzhxkh2b/)
-
I'd been out a while and it's good to see you're still here Pavel.
The quality of your work is great.
-
(https://s23.postimg.org/ufp8gii8n/IMG_0223.jpg) (https://postimg.org/image/ufp8gii8n/)
(https://s23.postimg.org/o3a36of6f/IMG_0224.jpg) (https://postimg.org/image/o3a36of6f/)
(https://s23.postimg.org/98q368uzb/IMG_0225.jpg) (https://postimg.org/image/98q368uzb/)
(https://s23.postimg.org/vlxtt1vx3/IMG_0226.jpg) (https://postimg.org/image/vlxtt1vx3/)
(https://s23.postimg.org/s3ltwnv13/IMG_0227.jpg) (https://postimg.org/image/s3ltwnv13/)
(https://s23.postimg.org/4dwe7ywnr/IMG_0228.jpg) (https://postimg.org/image/4dwe7ywnr/)
image upload (https://postimage.org/)
-
Wow, that's a really good looking cylinder and valve unit. Beautiful...
Pete
-
That is a great cylinder and valve assembly. Oh boy, Lots of studs!
I really think all that brass looks really nice as well.
ShopShoe
-
(https://s27.postimg.org/avpwsfi7z/IMG_3640.jpg) (https://postimg.org/image/avpwsfi7z/)
(https://s27.postimg.org/58tjuyfpb/IMG_3641.jpg) (https://postimg.org/image/58tjuyfpb/)
(https://s27.postimg.org/f7eihfp4v/IMG_0230.jpg) (https://postimg.org/image/f7eihfp4v/)
post image (https://postimage.org/)
-
(https://s15.postimg.org/nepkl3di3/IMG_0253.jpg) (https://postimg.org/image/xorzkc3dj/)screen shot (https://postimage.org/app.php)
:shrug:
-
(https://s14.postimg.org/tyglklz3l/IMG_0254.jpg) (https://postimg.org/image/7misr7zzh/)upload image (https://postimage.org/)
-
(https://s28.postimg.org/elwe75dy1/IMG_0273.jpg) (https://postimg.org/image/elwe75dy1/)
(https://s28.postimg.org/stm2vsqmx/IMG_0274.jpg) (https://postimg.org/image/stm2vsqmx/)
(https://s28.postimg.org/6iy7vttcp/IMG_0275.jpg) (https://postimg.org/image/6iy7vttcp/)
(https://s28.postimg.org/3q50bst09/IMG_0276.jpg) (https://postimg.org/image/3q50bst09/)
take a screenshot (https://postimage.org/app.php)
-
(https://s28.postimg.org/mephg73wp/IMG_0286.jpg) (https://postimg.org/image/mephg73wp/)
(https://s28.postimg.org/sgx46oscp/IMG_0287.jpg) (https://postimg.org/image/sgx46oscp/)
(https://s28.postimg.org/fqsvtlkeh/IMG_0288.jpg) (https://postimg.org/image/fqsvtlkeh/)
(https://s28.postimg.org/3q7fsvczt/IMG_0289.jpg) (https://postimg.org/image/3q7fsvczt/)
(https://s28.postimg.org/80m3ogi2x/IMG_0290.jpg) (https://postimg.org/image/80m3ogi2x/)
(https://s28.postimg.org/o04r80e4p/IMG_0291.jpg) (https://postimg.org/image/o04r80e4p/)
photo uploading (https://postimage.org/)
:cartwheel:
-
Looking very good - I can understand why you are happy about the result :praise2:
-
(https://s29.postimg.org/fl3oe3wvn/IMG_0297.jpg) (https://postimg.org/image/fl3oe3wvn/)
(https://s29.postimg.org/f9qtf35tf/IMG_0299.jpg) (https://postimg.org/image/f9qtf35tf/)
image upload no size limit (https://postimage.org/)
::)
-
It's good to see you here again! I really like that engine. It's not of the type we usually see here. The base is beautiful!! It looks like you are getting close to finish and paint... :cartwheel:
:cheers:
Pete
-
Glad to see all the progress you have made on this one. All of the care and attention to detail really show nicely!!
Bill
-
(https://s21.postimg.org/azvehpxlj/IMG_0300.jpg) (https://postimg.org/image/nei6i1p3n/)print screen windows 7 (https://postimage.org/app.php)
:cartwheel: Saturday to work quickly :cartwheel: :pinkelephant:
-
:ThumbsUp: :cheers:
-
(https://s16.postimg.org/m06u58z41/IMG_0301.jpg) (https://postimg.org/image/m06u58z41/)
(https://s16.postimg.org/wbj6xwqtd/IMG_0302.jpg) (https://postimg.org/image/wbj6xwqtd/)
imgurl (https://postimage.org/)
-
(https://s11.postimg.org/fkmzvdinj/IMG_0322.jpg) (https://postimg.org/image/fkmzvdinj/)
(https://s11.postimg.org/lzqm5ser3/IMG_0323.jpg) (https://postimg.org/image/lzqm5ser3/)
(https://s11.postimg.org/jwg6y4ey7/IMG_0324.jpg) (https://postimg.org/image/jwg6y4ey7/)
(https://s11.postimg.org/wp4ay1qjz/IMG_0325.jpg) (https://postimg.org/image/wp4ay1qjz/)
(https://s11.postimg.org/3nzyon63z/IMG_0326.jpg) (https://postimg.org/image/3nzyon63z/)
photo hosting (https://postimage.io/)
-
Looks like you soon get it to run :)
Very "modern" rod through frame from eccentric to steam chest :ThumbsUp:
Best wishes
Per
-
(https://s3.postimg.org/dd0jbrkun/IMG_0331.jpg) (https://postimg.org/image/dd0jbrkun/)
(https://s3.postimg.org/3tquiaxcf/IMG_0333.jpg) (https://postimg.org/image/3tquiaxcf/)
(https://s3.postimg.org/qjpzbagjz/IMG_0334.jpg) (https://postimg.org/image/qjpzbagjz/)
upload jpg (https://postimage.io/)
-
It's really shaping up to be a great model. :ThumbsUp:
-
http://www.smpd.cz/olympia/parni_olympia2017/parni_olympia2017_en.html
-
(https://s24.postimg.org/quu09fskx/IMG_0346.jpg) (https://postimg.org/image/quu09fskx/)
(https://s24.postimg.org/qw3y2uuep/IMG_0347.jpg) (https://postimg.org/image/qw3y2uuep/)
(https://s24.postimg.org/48oowpeup/IMG_0348.jpg) (https://postimg.org/image/48oowpeup/)
Ido not believe, it really works :cartwheel:
-
With your workmanship, Pavel, it was always going to work. Do we get to see the video? But always great to see that final part in place so we can see it run. Congratulations on another great model, and thank you for showing it.
I particularly like all the detail you put in with all the accessories, those models you have on display are fabulous. I have worked all my life in chemical plants with machines and piping, and you have it just right. I would love more detail on how you get all that pipe work bent just right. Especially the tight radius bends.
MJM460
-
The first run :cartwheel:
https://www.youtube.com/watch?v=XD4jxOA0MXQ
-
Excellent!
:cartwheel:
-
Beautiful!! I love the slow chuffchuffchuffchuff..... :pinkelephant: :cartwheel: :ThumbsUp: :ThumbsUp:
Pete
-
Very nice. Congrats. I alsolike the sound.
Vince
-
Very nice.............I love the sound as well. :)
Jim
-
I like it very much! :ThumbsUp: :ThumbsUp: :ThumbsUp:
--Tim
-
I thank everyone, now everything to clean and paint with color Pavel
-
Hi Pavel, beautifull. Great job.
-
I thank everyone, now everything to clean and paint with color Pavel
When the cleaning and painting starts, the project is very close to finish!
What engine will you build next?
Pete
-
Hi Pete,
Usualy building complet set. Now prepafing material for boiler, pump, dynamo.. Pavel
(https://s15.postimg.org/5ta8nrv7b/IMG_0358.jpg) (https://postimg.org/image/5ta8nrv7b/)
(https://s15.postimg.org/5uk6h6x13/IMG_0360.jpg) (https://postimg.org/image/5uk6h6x13/)
-
Hi Pavel,
A beautiful runner as expected. Beautiful work.
Now looking forward to the rest of the set.
MJM460
-
(https://s9.postimg.org/48psl6qgr/IMG_0362.jpg) (https://postimg.org/image/48psl6qgr/)
(https://s9.postimg.org/61xan9117/IMG_0364.jpg) (https://postimg.org/image/61xan9117/)
-
.
Now they look a truly handsome set of parts. :)
Nick
-
That makes a very impressive picture, all those beautiful parts!
I like the look of that boiler. Very powerful looking.
:cheers:
Pete
-
Excellent :praise2: :praise2: That boiler looks to be quite a challenge ::)
-
Nice family shot! Really puts things in perspective. :ThumbsUp:
-
Love the video Pavel. What a beautiful engine!!
Bill
-
Beautiful engine Pavel
Dave
-
Hi pavel,
You have me thinking now. Does two sets of castings at this stage mean the complete set is two more engines plus the boiler??? I will need a heap more popcorn for that lot!
Looking forward to that boiler too. It will be a challenge. And all your beautiful piping to top it all off.
MJM460
-
Hi pavel,
You have me thinking now. Does two sets of castings at this stage mean the complete set is two more engines plus the boiler??? I will need a heap more popcorn for that lot!
Looking forward to that boiler too. It will be a challenge. And all your beautiful piping to top it all off.
MJM460
Hi MJM460
I am sorry for my English. I building two motors for one singel and for one set. Singel motor Will be for sale later (maybe - I do not know if I will have the strength to sell it) :-\
-
Pavel, your english is just fine! Don't apologize... besides, your work speaks a language understood by all!
:cheers:
Pete
-
Hi Pavel,
No apology needed. What you have written is quite clear and so much better than I can do in any other language. Your contribution and courage to try is very much appreciated.
MJM460
-
:) :) :)
-
(https://s23.postimg.org/bwpbq1y1z/IMG_0431.jpg) (https://postimg.org/image/bwpbq1y1z/)
(https://s1.postimg.org/57t9j969n/IMG_0433.jpg) (https://postimg.org/image/57t9j969n/)
-
https://www.youtube.com/watch?v=4PNn3hT4FFg
-
That governor action is very clever. At last I can see something of how it works. I assume its effectiveness compares very well with those that adjust a throttle valve with tiny ball weights on a small radius. It makes for a very interesting engine.
MJM460
-
(https://s15.postimg.org/ls09v1tqv/IMG_0463.jpg) (https://postimg.org/image/ls09v1tqv/)
(https://s15.postimg.org/bvz6venyv/IMG_0464.jpg) (https://postimg.org/image/bvz6venyv/)
(https://s15.postimg.org/lhsrbpf4n/IMG_0466.jpg) (https://postimg.org/image/lhsrbpf4n/)
(https://s15.postimg.org/6zvk3pntj/IMG_0467.jpg) (https://postimg.org/image/6zvk3pntj/)
-
Beautiful!!! That is really something to be proud of!!
:cheers:
Pete
-
Really great looking piping Pavel. What do you use to protect the shine?
Alan
-
Pavel, When I see a beautiful and practical, (to do real work), like this one I keep thinking of making a steam powered Sherline lathe. Maybe you could publish or sell copies of the engine drawings? Thanks for the link to the steam olympiad, very interested to see European steam model activity. I would like to know what you think is the best speed, (revolutions), for this model. Looking forward to see it running on steam. Regards, Paul Gough.
-
(https://s2.postimg.org/dx7sesdmd/IMG_0673.jpg) (https://postimg.org/image/dx7sesdmd/)
(https://s2.postimg.org/we275ltkl/IMG_0675.jpg) (https://postimg.org/image/we275ltkl/)
(https://s2.postimg.org/5vjjwvuut/IMG_0678.jpg) (https://postimg.org/image/5vjjwvuut/)
(https://s2.postimg.org/f21uk6039/IMG_0679.jpg) (https://postimg.org/image/f21uk6039/)
Fencing done
-
Hi Pavel, very nice these black&white pictures.
-
(https://s26.postimg.org/dlgqf33z9/IMG_0479.jpg) (https://postimg.org/image/dlgqf33z9/)
(https://s26.postimg.org/vuni9e8yt/IMG_0574.jpg) (https://postimg.org/image/vuni9e8yt/)
(https://s26.postimg.org/8izekaup1/IMG_1129.jpg) (https://postimg.org/image/8izekaup1/)
(https://s26.postimg.org/cyhtpk739/IMG_1132.jpg) (https://postimg.org/image/cyhtpk739/)
(https://s26.postimg.org/ib6o3ouzp/IMG_1133.jpg) (https://postimg.org/image/ib6o3ouzp/)
(https://s26.postimg.org/vvxg2tasl/IMG_1143.jpg) (https://postimg.org/image/vvxg2tasl/)
(https://s26.postimg.org/gr1c5amlh/IMG_1144.jpg) (https://postimg.org/image/gr1c5amlh/)
(https://s26.postimg.org/791l590x1/IMG_1145.jpg) (https://postimg.org/image/791l590x1/)
(https://s26.postimg.org/z083zlrl1/IMG_1146.jpg) (https://postimg.org/image/z083zlrl1/)
(https://s26.postimg.org/qzttb4an9/IMG_3216.jpg) (https://postimg.org/image/qzttb4an9/)
like a boiler I try to make, the fireplace will be flooded with water
-
(https://s26.postimg.org/n4ke8emg5/IMG_1148.jpg) (https://postimg.org/image/n4ke8emg5/)
(https://s26.postimg.org/cvrx2kyed/IMG_1149.jpg) (https://postimg.org/image/cvrx2kyed/)
small fired brick for a boiler :pinkelephant: :cartwheel: :pinkelephant: :cartwheel:
-
(https://s26.postimg.org/jjqnalh0l/IMG_0001.jpg) (https://postimg.org/image/jjqnalh0l/)
-
Hi Parvel,
I'm not saying much but following along. Looking good! The brick's were a great find!
Cheers Kerrin
-
Very nice :ThumbsUp: :ThumbsUp: Where did you get the bricks from?
-
http://www.eitech.de/marken-und-produkte/teifoc/die-marke//
From CZ http://www.teifoc.cz
-
Those bricks look great. Found them in the US at Amazon and other places, search for "Teifoc Bricks". Actual small fired bricks and mortar.
Pavel, thanks for the link. The build is looking excellent!
-
https://www.youtube.com/watch?v=fq7pHmKJx6E
-
Not only looks great but sounds amazing as well Pavel. Beautiful work!!! :ThumbsUp:
Bill
-
https://www.youtube.com/watch?v=cWmiHutZv8s
https://www.youtube.com/watch?v=ge_4jp11juQ
-
Beautiful :ThumbsUp:
-
(https://s1.postimg.org/3ffti3x357/77452_DA2-9404-4_DFC-_AE36-1371314_C9_F2_D.jpg) (https://postimg.org/image/3ffti3x357/)
(https://s1.postimg.org/12d70w3mor/A1_F06196-365_C-4366-8_E17-_D02675246_D20.jpg) (https://postimg.org/image/12d70w3mor/)
(https://s1.postimg.org/79ol12f8sb/BFDE227_E-335_E-4_A1_C-_B454-01_CF855_D6_A65.jpg) (https://postimg.org/image/79ol12f8sb/)
(https://s1.postimg.org/19gewc4zyj/CF241730-3_B82-499_D-8_A49-0_E642_D12_CD03.jpg) (https://postimg.org/image/19gewc4zyj/)
(https://s1.postimg.org/5ec08g5drv/FB02_B63_A-3149-4_BE7-9_F95-1_B61_EE18325_D.jpg) (https://postimg.org/image/5ec08g5drv/)
-
(https://s1.postimg.org/1t7hovgy2z/1_D221_F10-3834-4_F78-9479-_F75_E523_D5_D28.jpg) (https://postimg.org/image/1t7hovgy2z/)
(https://s1.postimg.org/5ctfeodviz/22_A562_C4-4_CF6-4_DBD-8_E85-_C5_A4768_AFCEF.jpg) (https://postimg.org/image/5ctfeodviz/)
(https://s1.postimg.org/4ymznt9n9n/80_EB104_D-_D160-478_C-9909-17_B8_DA5319_B0.jpg) (https://postimg.org/image/4ymznt9n9n/)
(https://s1.postimg.org/20apkb0b7f/B7_F20_EEC-6_DF9-4801-_B059-_AFBAFD63_ED00.jpg) (https://postimg.org/image/20apkb0b7f/)
-
(https://s6.postimg.org/xkupydawt/14_B7_ADCE-606_C-4_C76-_A4_F1-_E83_B0_D52016_B.jpg) (https://postimg.org/image/xkupydawt/)
(https://s6.postimg.org/3sxnj5t8d/3_D008944-47_A5-4_CB5-9_C6_B-8_CD4_D96_ECD75.jpg) (https://postimg.org/image/3sxnj5t8d/)
(https://s6.postimg.org/56paf15il/4_BE2_AF93-_A2_C3-4_D8_B-_ADD6-2_DE830_B4_AEB3.jpg) (https://postimg.org/image/56paf15il/)
(https://s6.postimg.org/wvbxlysct/4_F46_BAFB-_A618-4_F93-_AA73-_D529_F2775_AE5.jpg) (https://postimg.org/image/wvbxlysct/)
(https://s6.postimg.org/byfphamm5/652551_BE-3344-4_A9_D-_B805-21_A08_A3_D313_F.jpg) (https://postimg.org/image/byfphamm5/)
(https://s6.postimg.org/iow6qqp7h/807_E122_A-_A17_E-4209-_BDF8-_E6_F7_F9_F4512_F.jpg) (https://postimg.org/image/iow6qqp7h/)
(https://s6.postimg.org/6zs72sle5/C7331_A38-85_B2-4672-_A611-_A5_CF86_B3011_A.jpg) (https://postimg.org/image/6zs72sle5/)
(https://s6.postimg.org/efrgolgt9/C91_F889_A-_FBE4-43_CF-_A4_AE-_E8_BF260697_FD.jpg) (https://postimg.org/image/efrgolgt9/)
(https://s6.postimg.org/jeez34sbx/D955187_C-_E2_EC-4_A29-_B90_F-_DF3_D38647_A82.jpg) (https://postimg.org/image/jeez34sbx/)
(https://s6.postimg.org/j1nkwxf71/FF3_C7_C58-1580-4_C94-8_CBF-_CA977_AE18_D6_D.jpg) (https://postimg.org/image/j1nkwxf71/)
-
(https://s17.postimg.org/665fx9ubv/279_C8_BE8-26_D0-4_B0_B-8_E4_F-5_DCC998_A00_FA.jpg) (https://postimg.org/image/665fx9ubv/)
-
Great pictures Pavel
Thanks for sharing.
Dave
-
(https://s14.postimg.org/49dmlmtz1/005_A606_A-_D6_AB-4170-8_D57-1250_F8_D42962.jpg) (https://postimg.org/image/49dmlmtz1/)
(https://s14.postimg.org/aabbiqqvx/0_FC29080-96_A2-4_D0_B-97_CB-_EEF634_D5_D0_AF.jpg) (https://postimg.org/image/aabbiqqvx/)
(https://s14.postimg.org/an2powm0d/4_EC0_A31_D-5504-4798-_A626-4252_D8296_D62.jpg) (https://postimg.org/image/an2powm0d/)
(https://s14.postimg.org/gb90ft5sd/4_F9_A423_C-_D6_A0-4_F00-_AA68-84_B1_A536_BF90.jpg) (https://postimg.org/image/gb90ft5sd/)
(https://s14.postimg.org/3wm8fgr4t/96114_CD3-_DCDB-49_C5-_BED4-_F557_E2_E2_F9_DB.jpg) (https://postimg.org/image/3wm8fgr4t/)
(https://s14.postimg.org/981504v71/B4287428-3503-4_CC6-_AFE6-196391243_F24.jpg) (https://postimg.org/image/981504v71/)
-
Good to see your pictures again Pavel.
I always enjoy them. Excellent workmanship!
-
For valves....... :)
(https://s9.postimg.org/yaaa0mqaj/0_DEEEAAD-3_E71-4_F86-8_AA7-41_FCDD465789.jpg) (https://postimg.org/image/yaaa0mqaj/)
(https://s9.postimg.org/u15jyg7ln/0_FA3_A439-03_DE-49_D8-8141-404_F30565_B80.jpg) (https://postimg.org/image/u15jyg7ln/)
(https://s9.postimg.org/lhm6194kb/20714_C3_E-_C73_B-45_C4-8_B4_D-8_D0_E1_CC44_EDF.jpg) (https://postimg.org/image/lhm6194kb/)
(https://s9.postimg.org/7cgcywdd7/4372413_A-2_A63-4645-85_B6-57_DBC996_FB8_F.jpg) (https://postimg.org/image/7cgcywdd7/)
(https://s9.postimg.org/6yf0zu3pn/44_F06_B19-3_DA8-4750-_AD84-_C2973_D745_AA4.jpg) (https://postimg.org/image/6yf0zu3pn/)
(https://s9.postimg.org/yzt2d069n/A6_A3_C133-_B595-4915-9854-_F46_A79_FDCBAA.jpg) (https://postimg.org/image/yzt2d069n/)
-
:zap: :) ;)
A very tidy wiring job!
--Tim
-
(https://s14.postimage.org/t8sc2yrul/850_D464_A-_BA6_F-4204-9_B8_C-85563647_CD45.jpg) (https://postimage.org/image/t8sc2yrul/)
(https://s14.postimage.org/agggze365/A4_B16985-_C221-4_B47-_B930-54499_E6_C4_FDB.jpg) (https://postimage.org/image/agggze365/)
-
Excellent :praise2: Is the MF70 fitted with original Proxxon stepper motors or ones from another supplier?
-
Excellent :praise2: Is the MF70 fitted with original Proxxon stepper motors or ones from another supplier?
(https://s14.postimage.org/u58psh83l/15_F577_A2-1_A03-47_E6-_BD3_F-_A90_E29718_FFD.jpg) (https://postimage.org/image/wzbv5xa9p/)
thank you, for sure I'm sending a photo
-
(https://s14.postimage.org/7htglv2ot/26_A63_DE9-2670-4441-_B601-43_D69_D7_D7_D6_F.jpg) (https://postimage.org/image/7htglv2ot/)
(https://s14.postimage.org/62rvx4tvx/4_D044225-_A55_D-4927-98_B1-14_B86183_DDE1.jpg) (https://postimage.org/image/62rvx4tvx/)
(https://s14.postimage.org/3wxl37ybh/5_B88_B8_A9-807_D-4_ED6-_AF40-3477_F43_A73_E1.jpg) (https://postimage.org/image/3wxl37ybh/)
(https://s14.postimage.org/mp9g6s7kd/C0_F1_AF71-_D831-4464-928_E-708939_BD774_F.jpg) (https://postimage.org/image/mp9g6s7kd/)
(https://s14.postimage.org/el1c1hfu5/ED0_EB103-_F5_CA-4_E72-_B04_B-95_AAC30_BBBFD.jpg) (https://postimage.org/image/el1c1hfu5/)
-
Thank you :ThumbsUp: What CNC software are you using? I also have an MF70 that I am thinking of converting to CNC.
-
Thank you :ThumbsUp: What CNC software are you using? I also have an MF70 that I am thinking of converting to CNC.
I use estlcam and draw autocad transport objects for estlcam. the ectlcam program can generate the entire program for any drawing with an autocad.
-
(https://s9.postimage.org/69ol7ojt7/071_D0268-_ED5_E-4_EF1-_A062-_DC0_C00_BE112_C.jpg) (https://postimage.org/image/69ol7ojt7/)
(https://s9.postimage.org/prj8nn3wb/1_BA79_C60-07_AF-40_A7-_B969-214815_DD925_B.jpg) (https://postimage.org/image/prj8nn3wb/)
(https://s9.postimage.org/93rql5guj/3_A169_B6_A-3_C24-412_A-_B285-91_DB0_CD8308_E.jpg) (https://postimage.org/image/93rql5guj/)
(https://s9.postimage.org/81hk2liln/887_DFB39-5_D40-4415-_B9_C3-_EF5824_F7_EED3.jpg) (https://postimage.org/image/81hk2liln/)
(https://s9.postimage.org/3scu0f7mj/91_F84_AAB-1_D29-4304-_AF24-13_D642632356.jpg) (https://postimage.org/image/3scu0f7mj/)
(https://s9.postimage.org/ymk2y4aob/BA2_BE500-_F2_FF-4_E97-8449-_BEF6651_C030_D.jpg) (https://postimage.org/image/ymk2y4aob/)
(https://s9.postimage.org/81hk2m5qz/F10_C3_C9_C-_E4_B4-453_F-9_BB2-509_B01_F5_CE19.jpg) (https://postimage.org/image/81hk2m5qz/)
(https://s9.postimage.org/4un0j00qj/FE0952_F6-86_A1-4231-8_DCB-8_A093_C246786.jpg) (https://postimage.org/image/4un0j00qj/)
-
It looks great but I am struggling with the scale. How big is it?
Tony
-
It looks great but I am struggling with the scale. How big is it?
Tony
Hi, 410 x 647 x 220 mm (l h w) just 27kg, after completion about 32kg Pavel
-
Thank you for the link to estlcam :ThumbsUp: Are the small tubes in the pictures for superheating?
-
Thank you for the link to estlcam :ThumbsUp: Are the small tubes in the pictures for superheating?
Yes it's a superheater, but I have to make it over. I have to put stronger 4mm pipes there. Pavel
-
(https://s7.postimage.org/fzzepnxav/0_A780_C46-_E68_F-4047-8_EAE-_E9_F85_CEA3932.jpg) (https://postimage.org/image/fzzepnxav/)
(https://s7.postimage.org/dvf1on0tz/457_A61_DE-_E78_A-4598-_B185-5_D7_D8_C771_FB2.jpg) (https://postimage.org/image/dvf1on0tz/)
(https://s7.postimage.org/vy84fu9jb/4_A3_F01_CC-5_DA1-427_B-_A4_C7-_B8_F81_B5291_BB.jpg) (https://postimage.org/image/vy84fu9jb/)
(https://s7.postimage.org/ttnrerfmf/5_FCC849_D-3_B1_C-4_F83-_A68_F-_B19_BB5_E55_CA5.jpg) (https://postimage.org/image/ttnrerfmf/)
(https://s7.postimage.org/mqfvz3zw7/6_CF219_F7-528_D-4_E3_D-_B86_C-310_DF3_A44747.jpg) (https://postimage.org/image/mqfvz3zw7/)
(https://s7.postimage.org/dvf1oly93/99_CC28_EE-_AD64-4_B37-_AEFB-2_AC78191_C930.jpg) (https://postimage.org/image/dvf1oly93/)
(https://s7.postimage.org/7uhcrl1d3/9_BF15_CF8-8314-4039-9803-_E484874_BBD06.jpg) (https://postimage.org/image/7uhcrl1d3/)
(https://s7.postimage.org/8wrja4zlz/A8_CEC1_EA-_FA7_C-4_DCD-_BEC9-_E4_E7327_E33_E4.jpg) (https://postimage.org/image/8wrja4zlz/)
(https://s7.postimage.org/vlgq9otuf/C1_F1_D454-2_E55-41_E4-914_E-_C03644_FA7987.jpg) (https://postimage.org/image/vlgq9otuf/)
(https://s7.postimage.org/62odwmcuf/C8_FD6_B60-_BD8_B-4358-8_D82-_C60397637_F2_A.jpg) (https://postimage.org/image/62odwmcuf/)
(https://s7.postimage.org/m0x3mru7r/DA70_E9_B2-_FBAC-45_E9-_ADAB-_F7_C3_BF5_C1_D48.jpg) (https://postimage.org/image/m0x3mru7r/)
(https://s7.postimage.org/99ixgan0n/E1_B7_E89_F-1_FB6-46_C1-9561-312_BCB4_B24_AF.jpg) (https://postimage.org/image/99ixgan0n/)
(https://s7.postimage.org/pxafiqzrr/ED09_FD03-8_FAC-437_E-88_F6-7_A6_D316248_E0.jpg) (https://postimage.org/image/pxafiqzrr/)
(https://s7.postimage.org/sem6q2otz/F439773_D-891_B-45_B7-_B141-_EE1_C2325_D2_B3.jpg) (https://postimage.org/image/sem6q2otz/)
(https://s7.postimage.org/exp876bxj/F5745_D98-71_DA-4103-8_BCB-60_A9_A884_FB20.jpg) (https://postimage.org/image/exp876bxj/)
-
Hi Pavel, excellent progress. Do you have a CAD model of your boiler ?
May be you can show us a sectional representation of the whole thing.
I admire the effort you put in this build.
-
Hi Pavel, excellent progress. Do you have a CAD model of your boiler ?
May be you can show us a sectional representation of the whole thing.
I admire the effort you put in this build.
(https://s7.postimage.org/k38t7md7r/1_ADC339_C-3_AC8-44_A5-_A464-_CF36_D29_F4_E68.jpg) (https://postimage.org/image/k38t7md7r/)
(https://s7.postimage.org/5wt2cea2f/D6378_E79-_DCC4-4881-85_DD-0_A199_B784_EDD.png) (https://postimage.org/image/5wt2cea2f/)
Hi Fumopuc,
i have a whole boiler in autocad, but it's not the same. I really do not know if it will work.
-
Hello Pavel - I have just (quickly) read through this thread for the first time from the start and must congratulate you on a stunningly awesome amount of work. Your fabrication of the engine to running condition is inspirational indeed - I truly admire your approach and attention to detail :praise2:
This will certainly be one superb steam plant once you have it finished :ThumbsUp: :ThumbsUp:.
I will return later to study your thread in much more detail :)
Regards - Tug
-
Morning Pavel......I had read this build since the first posting......small question..
Have you used stainless steel tube material for super heater or in boiler shell previously?
Stainless steel seems so unforgiving :Mad: in distortion due to localised heating
I am unsure of the consequences of this?
Derek
-
Morning Pavel......I had read this build since the first posting......small question..
Have you used stainless steel tube material for super heater or in boiler shell previously?
Stainless steel seems so unforgiving :Mad: in distortion due to localised heating
I am unsure of the consequences of this?
Derek
Hello,
I apologize for my English. I calculate the deformation of stainless steel components. The entire interior will be hung up with the upper pipe. There will be enough dilettats there. The exam will show everything.
Pavel
-
(https://s7.postimage.org/4muu1u487/5_CF96988-05_C7-47_BA-_AD5_A-54_F3_ABF189_CA.jpg) (https://postimage.org/image/4muu1u487/)
(https://s7.postimage.org/he908ctfr/624_F42_A7-9_BAC-407_D-_B7_AE-_C1942_C8683_E5.jpg) (https://postimage.org/image/he908ctfr/)
(https://s7.postimage.org/ansiywj4n/83_A22010-6065-452_B-8_EFF-_F2_A6_B28_FFE27.jpg) (https://postimage.org/image/ansiywj4n/)
(https://s7.postimage.org/ab14sqgaf/C98_CE039-587_F-42_F0-9913-6_B75706_F49_CB.jpg) (https://postimage.org/image/ab14sqgaf/)
-
(https://image.ibb.co/g8KBZ7/24_ECDED8_7_D1_B_49_B3_9_B66_C33_A59_C61592.jpg)
(https://image.ibb.co/c0n9Mn/7732_C274_8905_427_F_B506_A79911855916.jpg)
(https://image.ibb.co/g1NWZ7/84_D5_F26_A_E999_4_F21_BECD_A11_AE972_A3_EB.jpg)
(https://image.ibb.co/eHCWZ7/FA93_BF08_0_CDE_4_A6_B_B229_1_AAB5_BF72163.jpg)
(https://image.ibb.co/nRd5u7/229_BC454_728_B_46_C1_B354_3_BC177986_F35.jpg)
(https://image.ibb.co/hBupMn/C2_FC584_E_FA0_D_4456_98_EB_9_D2_EEC31_BA51.jpg)
(https://image.ibb.co/ij4ZnS/6_F82_AB0_F_3_FD6_4_E26_95_F1_26518555_CECD.jpg)
(https://image.ibb.co/f6upMn/F7_DA990_E_8_E08_403_E_A7_B7_2_A8_F980125_F6.jpg)
(https://image.ibb.co/b4Tign/6058_AA1_C_8249_419_E_8_B2_A_B60_D77_B8_A6_D6.jpg)
(https://image.ibb.co/fNFJE7/59085_C7_D_FC96_44_A1_B85_E_F47224_A5_B0_E4.jpg)
-
Hi Rarach,
The boiler is looking very nice! Its going to be nice to see her in steam.
Cheers Kerrin
-
Very impressive work!
-
(https://s7.postimg.cc/mm3f2v89j/486_F1098-0611-4_CA2-_A759-6_B01614_DE978.jpg) (https://postimg.cc/image/mm3f2v89j/)
(https://s7.postimg.cc/oqns3xugn/AC975951-20_DB-4_A0_A-_B42_B-394_E3_BAC8102.jpg) (https://postimg.cc/image/oqns3xugn/)
(https://s7.postimg.cc/3trjza45j/D02_DEC72-7_C9_E-44_D4-_B948-8_F3_D946_B03_C7.jpg) (https://postimg.cc/image/3trjza45j/)
-
(https://s7.postimg.cc/552kn0pfb/16516_C7_F-717_F-4_BF4-_B30_D-_B322_B51_A037_F.jpg) (https://postimg.cc/image/552kn0pfb/)
(https://s7.postimg.cc/pp7elhxgn/23092_C66-4_A3_C-48_D7-820_A-_E72_BB03313_AB.jpg) (https://postimg.cc/image/pp7elhxgn/)
(https://s7.postimg.cc/7z5q0gc5z/353855_A8-4_EB4-4_EEA-_BF85-81_BF4_F306_A94.jpg) (https://postimg.cc/image/7z5q0gc5z/)
(https://s7.postimg.cc/67cr5kvdz/60033819-4850-4_DED-_A506-931_EE31_F7237.jpg) (https://postimg.cc/image/67cr5kvdz/)
(https://s7.postimg.cc/3q0zyb3rr/7_E726309-772_F-4_F09-_AEA6-8_D7585475088.jpg) (https://postimg.cc/image/3q0zyb3rr/)
(https://s7.postimg.cc/f2dlg34qv/B2_E21_AD1-6_F1_E-4_FC2-_AECB-22_D78_E34_D3_E0.jpg) (https://postimg.cc/image/f2dlg34qv/)
(https://s7.postimg.cc/hwgqtic1z/DC313903-_B3_CE-4296-_B5_E4-_EE7_BFF82_B8_A1.jpg) (https://postimg.cc/image/hwgqtic1z/)
(https://s7.postimg.cc/jo9pogdfb/F06_E5415-_D9_D3-4573-_BB4_F-_D1554553_DBEF.jpg) (https://postimg.cc/image/jo9pogdfb/)
Uff the last bricks
-
Awesome Rarach.
Did you make those bricks yourself? How?
-
That's one impressive looking boiler :ThumbsUp:
A lot of skilled work has gone into creating that
-
Awesome Rarach.
Did you make those bricks yourself? How?
Hi, bricks are from Germany by the Tiefoc company. Pavel
-
(https://s7.postimg.cc/reccytmlz/0_F85_B0_B7-60_A8-4_A27-9_D71-_F943_C512_ADF8.jpg) (https://postimg.cc/image/reccytmlz/)
(https://s7.postimg.cc/tvo462jd3/21376149-0_EE0-4556-_BB94-696_E8_F9_AD795.jpg) (https://postimg.cc/image/tvo462jd3/)
(https://s7.postimg.cc/qc26g98xj/26_B80_D8_E-_F2_A2-4_B7_A-_A994-2_CFC96184444.jpg) (https://postimg.cc/image/qc26g98xj/)
(https://s7.postimg.cc/4cvrt3htj/7_CA7_FA53-_CE5_B-46_E6-9_C9_B-41_FE061_F9163.jpg) (https://postimg.cc/image/4cvrt3htj/)
(https://s7.postimg.cc/wpr9jjo47/8_C3_C1_DD8-_BFD5-492_C-_B6_D9-2_D3_D18_ECF9_FD.jpg) (https://postimg.cc/image/wpr9jjo47/)
(https://s7.postimg.cc/ezpkyixon/8_ECC7_C64-720_B-440_B-_A461-601_C8_A6843_AC.jpg) (https://postimg.cc/image/ezpkyixon/)
(https://s7.postimg.cc/nhz12uorr/8_F8828_D8-5_FB9-4209-820_F-_E18_E2911871_A.jpg) (https://postimg.cc/image/nhz12uorr/)
(https://s7.postimg.cc/iw2wugdif/9_A7_D0_E55-_DB01-45_DB-8_DD4-0_A90_C5_C35_EA5.jpg) (https://postimg.cc/image/iw2wugdif/)
(https://s7.postimg.cc/64oqo0glz/C25375_DB-263_A-4698-_BF8_A-5_B898_E9_CB32_B.jpg) (https://postimg.cc/image/64oqo0glz/)
(https://s7.postimg.cc/4pn5z8psn/C87_E2_EE7-_C7_C5-4_F1_F-_B3_F5-_F5185215_F763.jpg) (https://postimg.cc/image/4pn5z8psn/)
(https://s7.postimg.cc/6hg4u5gvb/CEFE2_C74-12_C9-400_D-958_D-62_B50_B074_A98.jpg) (https://postimg.cc/image/6hg4u5gvb/)
-
wow, very impressive work! thanks for posting it all
-
Most impressive inside and out. Hopefully we will get to see it fired and running the engine.
Bill
-
Wow. Very hard to tell I'm looking at a model. :ThumbsUp:
-
(https://s7.postimg.cc/3jtqeg0c7/6_DED9172-_BDD4-4035-_B64_E-_E10412_DA99_D7.jpg) (https://postimg.cc/image/3jtqeg0c7/)
(https://s7.postimg.cc/5oe3fj9on/F6695_FD4-4_E70-4_F77-9562-_C8989_BAFD6_D7.jpg) (https://postimg.cc/image/5oe3fj9on/)
-
(https://s7.postimg.cc/yo8hv5pmf/CE612_BE7-_E27_B-4100-99_FB-_D72995_FC9636.jpg) (https://postimg.cc/image/yo8hv5pmf/)
-
I love those bricks Rarach! Are they a particular scale and does the supplier offer them in different sizes?
Bill
-
I love those bricks Rarach! Are they a particular scale and does the supplier offer them in different sizes?
Bill
http://www.eitech.de/products-by-brands/teifoc/the-brand/
-
I love those bricks Rarach! Are they a particular scale and does the supplier offer them in different sizes?
Bill
http://www.eitech.de/products-by-brands/teifoc/the-brand/
Bricks I bought through a Czech supplier. I needed a lot of bricks and the supplier helped me not to be a kit but just a bricks. One thing is true, bricks are really real material.
-
(https://s7.postimg.cc/cgian6uzb/5_AB34670-2072-4097-_B4_C3-0_A11819_E5_F41.jpg) (https://postimg.cc/image/cgian6uzb/)
-
(https://s7.postimg.cc/h08be5ehz/0_F22627_D-134_E-4_FD0-9706-44_D30_BE50583.jpg) (https://postimg.cc/image/h08be5ehz/)
(https://s7.postimg.cc/trmhkmlp3/225_C69_C2-33_A5-4_BF3-_A29_C-_BCC6_DDFDCB6_F.jpg) (https://postimg.cc/image/trmhkmlp3/)
(https://s7.postimg.cc/hczpkbhc7/502_CB924-568_C-45_D8-_B716-_D4_B96358_BE94.jpg) (https://postimg.cc/image/hczpkbhc7/)
(https://s7.postimg.cc/p5qdcav13/CC6_E5710-_C6_B1-47_DE-829_B-275_BC76_BB66_E.jpg) (https://postimg.cc/image/p5qdcav13/)
-
Stunning Rarach.
Absolute craftmanship. :ThumbsUp:
-
Hi Pavel,
very nice.
Briks for your next project http://www.bloxxs.de/ , may be.
-
Wow! that's beautiful Pavel.
The whole project is just outstanding.
Dave
-
(https://s7.postimg.cc/7jef6v88n/2_F7604_CC-_AB20-4_C6_A-_B025-34_DF219_BC76_A.jpg) (https://postimg.cc/image/7jef6v88n/)
(https://s7.postimg.cc/6h48o0rwn/F43_C9_AFF-_B2_FC-4_D34-8_A53-1_CA8386_BF891.jpg) (https://postimg.cc/image/6h48o0rwn/)
-
(https://s7.postimg.cc/exrumr8ev/78346_C65-2_D52-4_EC8-8_EEE-231_BFCAE529_A.jpg) (https://postimg.cc/image/exrumr8ev/)
(https://s7.postimg.cc/yfmi2oxmv/84_B34_B1_B-66_CF-437_B-920_F-3_BC1_B363_F491.jpg) (https://postimg.cc/image/yfmi2oxmv/)
(https://s7.postimg.cc/ysdw8v86v/8_F205_EBA-4_F12-43_B4-9_EF3-5_C5_CB12972_EC.jpg) (https://postimg.cc/image/ysdw8v86v/)
(https://s7.postimg.cc/lbgxq0l0n/A7_DF2_C56-813_E-49_BF-_AEB0-27_A5_FB12_EDEA.jpg) (https://postimg.cc/image/lbgxq0l0n/)
(https://s7.postimg.cc/uw0kcv7rr/D5414807-_E590-4_F0_C-93_C3-69_CA85_A8_D308.jpg) (https://postimg.cc/image/uw0kcv7rr/)
-
That is looking great - very nice work!
-
The completed boiler is beautiful Pavel!
Dave
-
https://www.youtube.com/watch?v=uVdJwObST1E
-
Wow! Very nice!
Are all three yours?
It's great to see the video.
How close are you to Prague? My brother-in-law's wife is from there.
My wife and I had the chance to visit her family a couple of times. It was a great time.
-
Thank you, I built all the models in 6-7 years. I am from Brno and it is on the other side of the small republic - 205km (127mi)
-
I would like to ask everyone to buy castings for a small steam boiler pump. Does anyone have a link?
-
the realism of this boiler is fantastic, bravo! beautiful achievement.
these 3 steam plan make a great spot of your steam fair.
Why not a Stuart for your water pump ?
-
my idea is the Duplex steam pump, I wrote on this link http://www.southworthengines.com/steam-feed-pumps/duplex-steam-pumps/, they did not sign up
-
Hi Pavel,
no castings but a plan set to make it from bar stock.
http://www.modelengineeringwebsite.com/Twin_cylinder_water_pump.html
-
it looks good, thank you
-
You can be very proud of them all Pavel :praise2:
-
(https://s22.postimg.cc/vtnrf59hp/13769_FBB-13_BF-400_E-_B541-3_AEEAA712_C41.jpg) (https://postimg.cc/image/vtnrf59hp/)
(https://s22.postimg.cc/vtnrf5ox9/466_D6570-38_AC-4_A92-9660-2126334_A877_C.jpg) (https://postimg.cc/image/vtnrf5ox9/)
(https://s22.postimg.cc/e3m2u4j25/6_ECAB737-_A0_F0-48_D0-8399-9_B3082_BDFEDB.jpg) (https://postimg.cc/image/e3m2u4j25/)
(https://s22.postimg.cc/5y40vw2i5/8_BA2_C04_A-_F78_C-4712-8_AD1-_D917_C0403_D0_F.jpg) (https://postimg.cc/image/5y40vw2i5/)
(https://s22.postimg.cc/6nmt8asrx/D8_FAA438-01_E7-4883-_B846-8_F528_FEBFAA5.jpg) (https://postimg.cc/image/6nmt8asrx/)
-
Some great models in your video Pavel :)
Did you make the vertical boiler powering the Corliss engine ?
-
Some great models in your video Pavel :)
Did you make the vertical boiler powering the Corliss engine ?
Hi, yes I did. Drew and welded from stainless steel.
-
It looks an impressive boiler, did you post any info / photos etc of its build ? I'd be interested to read about it.
-
Some great models in your video Pavel :)
Did you make the vertical boiler powering the Corliss engine ?
Hi, yes I did. Drew and welded from stainless steel.
(https://s22.postimg.cc/j2e6m24fh/00_E6286_A-_B286-4_B9_F-9270-4_A50_BD989_A69.jpg) (https://postimg.cc/image/j2e6m24fh/)
(https://s22.postimg.cc/szp7f74cd/0706_B173-_E408-49_B1-_A467-4_D914_D81_A3_C4.jpg) (https://postimg.cc/image/szp7f74cd/)
(https://s22.postimg.cc/jrwyyikfh/141387_DC-_DABC-4_B08-_B219-_AEB7_C20_CE9_FB.jpg) (https://postimg.cc/image/jrwyyikfh/)
(https://s22.postimg.cc/b9niu2qql/6252_C8_E4-1_C1_D-427_D-_A5_C7-3672_BFFD7029.jpg) (https://postimg.cc/image/b9niu2qql/)
(https://s22.postimg.cc/ak4qhs32l/65_E8_F981-6_C86-471_F-9970-3_D1_E96_F2_C8_B2.jpg) (https://postimg.cc/image/ak4qhs32l/)
(https://s22.postimg.cc/l6yjn8631/6_EF42_B87-7101-40_EF-_A46_F-_F18685_A1_B375.jpg) (https://postimg.cc/image/l6yjn8631/)
(https://s22.postimg.cc/3to98dihp/7_C0_C59_D2-_AC10-4132-_B768-830552974_FED.jpg) (https://postimg.cc/image/3to98dihp/)
(https://s22.postimg.cc/u1zdxoxfh/7_C0_CAD2_C-_CFD9-4_D9_B-_AFAB-34_C4_D156_CC09.jpg) (https://postimg.cc/image/u1zdxoxfh/)
(https://s22.postimg.cc/oqkhd067x/84831004-843_D-43_F6-_A40_C-_E6348_D17621_B.jpg) (https://postimg.cc/image/oqkhd067x/)
(https://s22.postimg.cc/70isry5hp/876_C8786-_AC95-4316-_B54_C-3_D89_BA73_E9_C3.jpg) (https://postimg.cc/image/70isry5hp/)
(https://s22.postimg.cc/a7dcbjnct/9275_D592-272_D-4_FE7-956_F-24_B04712_A900.jpg) (https://postimg.cc/image/a7dcbjnct/)
(https://s22.postimg.cc/ueqs3w2ul/AAC31_B7_C-_C16_F-4424-8_CB5-_F148_EE74_FE7_F.jpg) (https://postimg.cc/image/ueqs3w2ul/)
(https://s22.postimg.cc/ipmsfx465/C1_BEB1_DE-2284-46_AE-_AD56-574_E2_F63_F736.jpg) (https://postimg.cc/image/ipmsfx465/)
(https://s22.postimg.cc/5lh8379jh/C450_F8_B3-_E89_A-4893-_A4_E8-76_F93_B587173.jpg) (https://postimg.cc/image/5lh8379jh/)
(https://s22.postimg.cc/46fnehg65/C5_A6769_E-6_C33-46_C1-_ADB8-_BCECF7_F2_E153.jpg) (https://postimg.cc/image/46fnehg65/)
(https://s22.postimg.cc/v49kg88j1/CC37_CE5_B-_D284-4_D96-8_B75-_EDD0_BBB3120_D.jpg) (https://postimg.cc/image/v49kg88j1/)
(https://s22.postimg.cc/82szaiylp/D43816_E9-2_C06-4_A02-_A2_C8-31571_D14_FA1_A.jpg) (https://postimg.cc/image/82szaiylp/)
(https://s22.postimg.cc/bz6b6ibvh/E86_F59_F1-346_F-49_A9-_A529-_D861_F69_D9_BFB.jpg) (https://postimg.cc/image/bz6b6ibvh/)
-
Thanks Pavel :)
That's a nice piece of kit. I'm looking to get something similar later this year but building one is beyond my skill so I'll have to buy :(
-
Thanks Pavel :)
That's a nice piece of kit. I'm looking to get something similar later this year but building one is beyond my skill so I'll have to buy :(
after experience, I know it's harder to make a steam boiler than a steam engine
-
after experience, I know it's harder to make a steam boiler than a steam engine
Yea I can understand that, I've got the materials to make a small copper boiler and I think I can possibly make a very simple one but really I want something about 6" dia with fire tubes suitable for coal firing and to do that I'm going to have to buy one.
-
I haven't made a boiler yet (not counting the little 0-4-0 locomotive).
What makes the boiler harder to make?
Making sure it can take the pressure?
-
(https://s8.postimg.cc/5o2cdbl7l/37_FECEE5-_B3_CA-4995-_AF7_B-2_E5785848900.jpg) (https://postimg.cc/image/5o2cdbl7l/)
(https://s8.postimg.cc/9x72fhgr5/4_ABB89_E2-_F215-4792-_BEEF-3_C99_E69728_BD.jpg) (https://postimg.cc/image/9x72fhgr5/)
(https://s8.postimg.cc/wxdpseer5/8_C334197-_A368-4_D37-_BB87-19_A30_A854958.jpg) (https://postimg.cc/image/wxdpseer5/)
(https://s8.postimg.cc/fk3fdjr5t/BEDA9931-_B7_D0-4_D8_A-_B4_CA-7_C4_BB8_D5_C140.jpg) (https://postimg.cc/image/fk3fdjr5t/)
(https://s8.postimg.cc/4x9m83vv5/DD5_F0338-988_C-4_CD5-_B428-53_EEBEC831_A9.jpg) (https://postimg.cc/image/4x9m83vv5/)
(https://s8.postimg.cc/l89q4f0n5/E5966_BCF-_F280-4_E1_D-_A27_C-_D6608867610_B.jpg) (https://postimg.cc/image/l89q4f0n5/)
completion of a hand pump
-
This is an incredible and an inspiring build and video.
Absolutely top drawer.
Beautiful.
John
-
Beautiful work Pavel!
Dave
-
První pouštení na páru/the first steam run
https://www.youtube.com/watch?v=x8WIbVsgxOA
https://www.youtube.com/watch?v=Vi9l7-jJWZQ
-
Awesome Pavel! That is a stunning model. An absolute show piece. Congratulations! :ThumbsUp: :ThumbsUp: :ThumbsUp:
:praise2:
-
Beautiful work!
-
Beautiful, unbelievable workmanship. :ThumbsUp: :ThumbsUp: :ThumbsUp:
Have a great day,
Thomas
-
Awesome Pavel. The boiler and engine are both works of art!!
Bill
-
Great stuff Pavel, that really is a set up to be proud of :)
-
Very nice Pavel, you do amazing work!
Dave
-
It looks great.
Tony
-
Steam pump for boiler...
(https://i.postimg.cc/K1d5nvPN/5_EE38166-_E2_E5-46_E4-_A0_EA-7_CEE21_AA83_D2.jpg) (https://postimg.cc/K1d5nvPN)
(https://i.postimg.cc/62z5NqzL/D6_FC85_D2-9678-42_F3-8_F3_C-81_F2_C86_CF2_DC.jpg) (https://postimg.cc/62z5NqzL)
-
https://www.youtube.com/watch?v=g1Np-9Q1PzA
-
Ahh! The Southworth pump! I'm interested in steam pumps so I'll be watching your build.
:ThumbsUp: :popcorn:
Pete
-
(https://i.postimg.cc/MMJYjnWk/00-EF8181-7593-403-C-AA7-F-DD7-F389-BA1-AB.jpg) (https://postimg.cc/MMJYjnWk)
(https://i.postimg.cc/CdN4zMXt/3-CD85-B90-57-C6-4-A29-BE5-B-B8-FC6210-F50-F.jpg) (https://postimg.cc/CdN4zMXt)
(https://i.postimg.cc/rzcJVRnx/47-D978-EC-4-B31-4434-A306-D3-E0-E3-F1-CAF9.jpg) (https://postimg.cc/rzcJVRnx)
(https://i.postimg.cc/bsmLFYRb/48-F755-CA-4930-4-CDD-9312-FDA209-C5219-A.jpg) (https://postimg.cc/bsmLFYRb)
(https://i.postimg.cc/947pMdHt/7-FA01347-79-C2-44-EE-A9-CC-090-B459-EF0-B4.jpg) (https://postimg.cc/947pMdHt)
(https://i.postimg.cc/sGV9wbQw/AC206833-EDFD-40-C2-9119-1-EA5-A29025-CD.jpg) (https://postimg.cc/sGV9wbQw)
(https://i.postimg.cc/PCNKGG67/B17-D4-CBA-4425-411-D-91-A9-8-D5-DB42-FBFE7.jpg) (https://postimg.cc/PCNKGG67)
(https://i.postimg.cc/0MG0G9Qz/C7-F970-CE-D928-456-D-B7-B5-0-C5-F608-CB152.jpg) (https://postimg.cc/0MG0G9Qz)
-
(https://i.postimg.cc/ykHB9TLh/962-DD32-D-0573-4-E79-9-BFF-5869-F7-F2014-C.jpg) (https://postimg.cc/ykHB9TLh)
(https://i.postimg.cc/y3FHtJ8S/D23-A242-D-270-F-46-C0-B20-C-3359-EE5-ECB8-E.jpg) (https://postimg.cc/y3FHtJ8S)
(https://i.postimg.cc/K1c2p8SR/DE073038-D742-4-F69-97-A5-C5610544606-A.jpg) (https://postimg.cc/K1c2p8SR)
(https://i.postimg.cc/18WZk1sM/ECD6-F955-B5-AF-4128-847-D-08-F0-C4635-E31.jpg) (https://postimg.cc/18WZk1sM)
-
(https://i.postimg.cc/jnHrzH9T/0994-F917-CA25-48-CA-9-D19-61-BF0-A8-E42-E7.jpg) (https://postimg.cc/jnHrzH9T)
(https://i.postimg.cc/xXxVyTsX/8931-B028-8432-41-D6-A27-D-83-A80-B3-F96-A5.jpg) (https://postimg.cc/xXxVyTsX)
(https://i.postimg.cc/bZNjt2RX/95-F8700-B-0297-436-D-870-B-143-E7334-D716.jpg) (https://postimg.cc/bZNjt2RX)
(https://i.postimg.cc/crcSCcwM/C7-EC8207-E099-4118-90-EE-EC445-C183467.jpg) (https://postimg.cc/crcSCcwM)
(https://i.postimg.cc/t1sQrQf2/E7-CB78-C2-D476-4-AE2-B0-CD-8-C0-D71416080.jpg) (https://postimg.cc/t1sQrQf2)
-
Looking great Pavel :) I'll be interested to see it running once completed.
In a fit of madness I bought a set of castings to make the 3" Southworth pump but haven't made a start yet.
-
Beautiful!! I can't wait to see it run. :praise2:
Pete
-
(https://i.postimg.cc/2LptP3X0/0-BECA4-EC-0-F98-445-E-BF6-A-51-E8-B5-A6-C24-A.jpg) (https://postimg.cc/2LptP3X0)
(https://i.postimg.cc/dkzMw5Dm/44163325-C3-B2-4238-A3-ED-EB98-B042-B11-B.jpg) (https://postimg.cc/dkzMw5Dm)
(https://i.postimg.cc/2L4tmmsr/46143360-964-A-4-D31-8-B7-E-ADE3257166-DE.jpg) (https://postimg.cc/2L4tmmsr)
(https://i.postimg.cc/2qKM70dR/718-E821-D-8-FB2-46-BF-9-C7-B-FBA3-B67557-DE.jpg) (https://postimg.cc/2qKM70dR)
(https://i.postimg.cc/bDSMC1LG/94-B02-A8-A-1-A92-43-C0-B6-B0-8398-D68-B75-F2.jpg) (https://postimg.cc/bDSMC1LG)
(https://i.postimg.cc/7C6jzF2n/9-E08-E9-AC-0-C78-404-B-81-B4-64-E6379-A99-BD.jpg) (https://postimg.cc/7C6jzF2n)
(https://i.postimg.cc/JtJvjcGv/A9-D076-BE-A67-B-44-A2-9-AF4-3-FBA48-D7813-C.jpg) (https://postimg.cc/JtJvjcGv)
(https://i.postimg.cc/G4zZHLHp/E60-F3-B10-F123-478-B-A407-0-E1-D65421-C7-A.jpg) (https://postimg.cc/G4zZHLHp)
-
(https://i.postimg.cc/TyPWNznC/247-B3742-F1-A9-413-A-BBDC-14-FFDC59193-A.jpg) (https://postimg.cc/TyPWNznC)
(https://i.postimg.cc/Vrr0mXGt/D18-AA103-7377-450-A-A2-EF-A5500-CB3-B51-D.jpg) (https://postimg.cc/Vrr0mXGt)
-
(https://i.postimg.cc/9w4GY8cF/11-A9-CD6-A-BC1-A-438-A-B201-226415-ACF14-D.jpg) (https://postimg.cc/9w4GY8cF)
(https://i.postimg.cc/bG89f993/1-C16-C900-BFEA-4-EAB-9903-126-BDD87-B57-A.jpg) (https://postimg.cc/bG89f993)
(https://i.postimg.cc/Yjjf79QK/46-E30-D26-6-E33-4-FA0-B591-E25-A392325-B5.jpg) (https://postimg.cc/Yjjf79QK)
(https://i.postimg.cc/47xvm4Mc/F6-CCDFAC-64-A0-48-FC-9-F8-A-B80-D281-C3-B4-D.jpg) (https://postimg.cc/47xvm4Mc)
-
Nice progress :ThumbsUp:
-
(https://i.postimg.cc/CnpcrQqN/9-B9-D582-C-9-CDC-492-B-8-A8-C-8-FDD67-A87-E3-E.jpg) (https://postimg.cc/CnpcrQqN)
(https://i.postimg.cc/DmYZs31L/EABA2-C42-B038-44-BA-B8-F0-CF829-C11-C5-C2.jpg) (https://postimg.cc/DmYZs31L)
(https://i.postimg.cc/hzdCrBfv/F281444-D-4742-41-A9-A453-62-D60-FB1567-C.jpg) (https://postimg.cc/hzdCrBfv)
-
(https://i.postimg.cc/nCFwMpSq/369-D46-B7-4-C54-477-F-B3-AA-0-B0-DE96271-D3.jpg) (https://postimg.cc/nCFwMpSq)
(https://i.postimg.cc/z31QZnnt/F570-D84-F-2961-4-B51-8768-4-DCC1106-C0-A8.jpg) (https://postimg.cc/z31QZnnt)
-
Wow, that's a very tiny valve! Very impressive. I like the whole pump and how it's shaping up. Great work!!
Pete
-
In the 1st and 3rd picture in reply 223...
Looks like a screw going through the valve block (the part the valve rod goes through) into the D slide valve.
I've not seen that before. What is the reason?
Thanks.
I always enjoy seeing your work. It's always excellent.
-
Walls in the slide are small, it's for stability.
-
https://www.youtube.com/watch?v=P3Cj4_X7Uh0
-
Yes!! It runs!! Sounds very smooth...
:ThumbsUp: :popcorn:
:cheers:
Pete
-
(https://i.postimg.cc/62FxBvj2/567-D9-F05-76-AE-4677-A136-3-A5926072605.jpg) (https://postimg.cc/62FxBvj2)
(https://i.postimg.cc/xcDV7LNB/6-B4-C86-A9-404-F-4-E4-E-B3-C3-0-FDF2-FC3-B014.jpg) (https://postimg.cc/xcDV7LNB)
control check valve for steam pump
-
Beautiful pump Pavel!!!
Bill
-
Instal steam pump for test...
(https://i.postimg.cc/zbwRBYv8/118586-F9-A700-44-B4-8-A0-A-CCD834-A2-E0-C1.jpg) (https://postimg.cc/zbwRBYv8)
(https://i.postimg.cc/4HJHH2Ht/C3-A08676-3809-4-DB8-A052-01019517-ABC7.jpg) (https://postimg.cc/4HJHH2Ht)
-
Looking good Pavel! :ThumbsUp: :ThumbsUp: :ThumbsUp:
Impressive steam plant that's coming together. :popcorn:
-
(https://i.postimg.cc/WDSYYKH7/20-E92-C97-984-F-4739-9-F2-F-87-F1-A5025-C86.jpg) (https://postimg.cc/WDSYYKH7)
(https://i.postimg.cc/qhRbPwfH/4-F17-A8-E6-9996-45-B8-98-F3-2-D64-D46-DDFFE.jpg) (https://postimg.cc/qhRbPwfH)
(https://i.postimg.cc/HchZdMHc/5-A65713-E-50-FC-4-DC4-AE1-E-CB7-B82-EEA2-E7.jpg) (https://postimg.cc/HchZdMHc)
(https://i.postimg.cc/XBB2Jv72/5-DC4-B59-D-7-B52-49-A7-9-F08-7-E9-FD131-EC1-B.jpg) (https://postimg.cc/XBB2Jv72)
(https://i.postimg.cc/4Y6SVnvq/D481-D379-70-F9-4-D8-F-867-F-33654-E3-F73-B9.jpg) (https://postimg.cc/4Y6SVnvq)
(https://i.postimg.cc/mhPpVmNQ/F3-CC807-C-5779-41-D2-B0-BF-B3-BE4-C5-AFE61.jpg) (https://postimg.cc/mhPpVmNQ)
-
Hi Pavel, again a masterpiece.
-
(https://i.postimg.cc/CRscp6hR/E257-DD28-4-CD9-44-BB-A554-1-F7-C0-E4117-CB.jpg) (https://postimg.cc/CRscp6hR)
-
Hullo Pavel......I have followed and chased as best the fluid lines on either side of these, but do not understand what these flanged round bodied assemblies with the representation of a grate milled into the top
I have dismissed flanged inline filters.....but now am stumped :facepalm:.....and we see [3] three of them in this build.....the one I have shown appear to be on the discharge or outlet side of the water relief valve
Again congratulations on this latest build
Derek
-
hello, valves are not finished ...
-
(https://i.postimg.cc/9Rw9GzdR/0-FECDEF6-4-FC9-495-F-957-A-04082-D096-C83.jpg) (https://postimg.cc/9Rw9GzdR)
(https://i.postimg.cc/mcJz2Rvb/378-DC248-6-FFB-4997-80-C7-BA5-B0-B68-C091.jpg) (https://postimg.cc/mcJz2Rvb)
(https://i.postimg.cc/BjZ1mm5G/70-AAE2-AA-8-A39-44-F4-8171-02-A15089-B04-E.jpg) (https://postimg.cc/BjZ1mm5G)
(https://i.postimg.cc/v1cxsDSq/710-DD151-D358-4-BAB-8-BE7-DE1507-FB0-F8-A.jpg) (https://postimg.cc/v1cxsDSq)
(https://i.postimg.cc/gnHZyCZD/80-D43-A6-B-735-C-4-A61-8-E47-C25-ED348-C516.jpg) (https://postimg.cc/gnHZyCZD)
(https://i.postimg.cc/Czg8qhz5/CED5-E38-A-C055-4-E71-9-A43-C3062-CAD3887.jpg) (https://postimg.cc/Czg8qhz5)
(https://i.postimg.cc/w1WRZDFR/D3318983-24-DB-4-E6-E-9-BBE-1-A860-EB19774.jpg) (https://postimg.cc/w1WRZDFR)
-
It looks fantastic Pavel :praise2:
-
Splendid :praise2: :praise2: I admire your attention to detail :wine1:
-
That whole setup looks fantastic. Excellent work!
-
(https://i.postimg.cc/RWXLh4gZ/16965-CEA-B85-B-4238-A5-C8-D3720984-BFEA.jpg) (https://postimg.cc/RWXLh4gZ)
(https://i.postimg.cc/JD9q8xP3/828-A7-FA4-4-A93-4-B8-B-A82-D-58-BC615-BE790.jpg) (https://postimg.cc/JD9q8xP3)
(https://i.postimg.cc/gxYKGnq7/91-F66472-8-F5-A-48-BA-9525-A641-B090-C57-B.jpg) (https://postimg.cc/gxYKGnq7)
-
https://www.youtube.com/watch?v=H8q6Xg8bqwY
-
Wow, that looks and sounds great.
Tony
-
that's a lovely engine there.......good work...
Willy
-
(https://i.postimg.cc/56tzDc0r/2-EDCE3-D4-0-A34-4-DE6-8-AF3-D7-E9-B29593-C3.jpg) (https://postimg.cc/56tzDc0r)
(https://i.postimg.cc/t7kPrRXP/7-B5-B6-ECD-5963-411-B-95-F1-9-B805-DD0-EFE8.jpg) (https://postimg.cc/t7kPrRXP)
(https://i.postimg.cc/LYMfWnYk/9-F887-EE7-1-C7-F-4-AF2-B13-F-B2-C69-EB652-CD.jpg) (https://postimg.cc/LYMfWnYk)
(https://i.postimg.cc/CZ8kJj1L/A2-BC5-F07-CE55-43-E8-9-B3-C-99-BFDDD9-D5-B7.jpg) (https://postimg.cc/CZ8kJj1L)
(https://i.postimg.cc/rKY4khRw/A5-A439-BD-ACCC-4-D6-C-A8-A3-2-F341910-D488.jpg) (https://postimg.cc/rKY4khRw)
(https://i.postimg.cc/8sNMBfVN/A5-EC8-D9-E-5-F3-B-4-D21-9-F91-57-EDBD7-F3-BCC.jpg) (https://postimg.cc/8sNMBfVN)
-
Superb Pavel...... :facepalm:
Have you used a Neoprene or Nitrile ball in the accumulator for the pre-charge?
Derek
-
Beautiful work as always, Pavel. Particularly impressive is your pipe work and valves. I find them more difficult than the more simple shapes of engine parts, but you always get them just right.
Any progress pictures when you are bending up that pipe work would always be welcome.
MJM460
-
Superb Pavel...... :facepalm:
Have you used a Neoprene or Nitrile ball in the accumulator for the pre-charge?
Derek
Hi, yet it's just a hollow adornment. Pavel
-
(https://i.postimg.cc/XXjrPfvy/0-D99-BF3-D-B204-42-BF-96-B9-D3473-D6-B7-DEE.jpg) (https://postimg.cc/XXjrPfvy)
(https://i.postimg.cc/rzwpjqh1/2-FEE1-D94-C90-E-411-C-A2-C9-632-EF3-A71-AE7.jpg) (https://postimg.cc/rzwpjqh1)
(https://i.postimg.cc/KR4RGmBG/4-C14012-B-8-BCB-434-B-B775-AD2-B851962-AD.jpg) (https://postimg.cc/KR4RGmBG)
(https://i.postimg.cc/w34jbnPS/72517-C63-0-E4-E-4-DB5-B31-D-7317-F17-FB9-ED.jpg) (https://postimg.cc/w34jbnPS)
(https://i.postimg.cc/XrmFSpP6/93946-D48-BB73-463-E-8-A39-21-C507-B23-B14.jpg) (https://postimg.cc/XrmFSpP6)
(https://i.postimg.cc/ykJ8qvCW/A0-F2-D7-FE-8502-4-A67-B7-A7-8023-ED8-B2-CF4.jpg) (https://postimg.cc/ykJ8qvCW)
(https://i.postimg.cc/yWLDCDJp/A5-C657-E4-F19-D-4-B6-C-9-B85-8-AF3-D467-DEA2.jpg) (https://postimg.cc/yWLDCDJp)
(https://i.postimg.cc/Pp4PxxSx/A8937-A41-7-F4-A-4362-AFF8-EFAEC51-D4-B69.jpg) (https://postimg.cc/Pp4PxxSx)
(https://i.postimg.cc/62NvqFwH/B5-F36-E65-C069-42-A9-89-C5-25-ED8-A3-D0-E6-C.jpg) (https://postimg.cc/62NvqFwH)
(https://i.postimg.cc/wRj3sprk/B67289-E8-90-BC-4-AE9-A0-CF-53-D1-FD2-F77-B3.jpg) (https://postimg.cc/wRj3sprk)
(https://i.postimg.cc/QH61m6kt/B7-CA779-C-DE7-E-4-B1-A-89-B3-46-E057-BAEAB6.jpg) (https://postimg.cc/QH61m6kt)
(https://i.postimg.cc/YGqtdxxr/B82061-B0-987-A-497-F-830-F-2-AA70-A3-B8-C25.jpg) (https://postimg.cc/YGqtdxxr)
(https://i.postimg.cc/Cztdd9sj/CAFCB3-A7-EF18-489-D-A0-C9-8-DC719257064.jpg) (https://postimg.cc/Cztdd9sj)
-
Excellent :praise2: :praise2: Is the generator your own design? Are the coils from a commercial source?
-
:ThumbsUp:
Beautiful work! Love the piping detail.
John
-
(https://i.postimg.cc/4YRyGRv8/695663-EE-380-A-4-A1-D-8056-8-BE47-B42-F5-F2.jpg) (https://postimg.cc/4YRyGRv8)
(https://i.postimg.cc/G4P2hgqb/7631198-F-8878-43-CA-BDBA-248-C425609-B4.jpg) (https://postimg.cc/G4P2hgqb)
(https://i.postimg.cc/qtk7tc5y/9182-B840-DBA0-483-C-9-E5-D-4-CA6006-C2-CE4.jpg) (https://postimg.cc/qtk7tc5y)
(https://i.postimg.cc/9R0FbmVf/B1-D33292-B986-49-E8-B6-C8-064-D104339-BD.jpg) (https://postimg.cc/9R0FbmVf)
(https://i.postimg.cc/cKXLfKpj/E811-E56-F-CDB8-4-DA0-89-CC-67-FAD920-ABA0.jpg) (https://postimg.cc/cKXLfKpj)
-
Finish
(https://i.postimg.cc/7CYwvWss/0-D3-CBAC9-B6-E3-4-AF0-B183-57158523-A63-E.jpg) (https://postimg.cc/7CYwvWss)
(https://i.postimg.cc/nXxn2zvt/56-F08-D8-B-4879-4702-A554-920-CE3-E9-D247.jpg) (https://postimg.cc/nXxn2zvt)
(https://i.postimg.cc/7bCPYjxj/8-B327-C53-D913-42-E3-ADDE-65-AF291-A7517.jpg) (https://postimg.cc/7bCPYjxj)
(https://i.postimg.cc/G4jd5CQT/9-F2-F3545-0-B63-43-A9-A00-D-737-CC6-ECF07-B.jpg) (https://postimg.cc/G4jd5CQT)
(https://i.postimg.cc/RqjS3Ghh/E2-D7-B6-BC-5951-41-A9-8-EBA-99278-F5-B6-EDC.jpg) (https://postimg.cc/RqjS3Ghh)
-
:ThumbsUp:
Wow! & a beautiful finish it is!
:popcorn:
John
-
Excellent :praise2: I will be interested in the output you get :)
-
(https://i.postimg.cc/bG8YJnQ8/1-BD84-F58-78-B1-4-F66-A164-F9-A976928-CF3.jpg) (https://postimg.cc/bG8YJnQ8)
(https://i.postimg.cc/gx3kmsLN/42-F51697-8-BBD-4-C41-8-D1-C-B4-DEC4-A01-A51.jpg) (https://postimg.cc/gx3kmsLN)
(https://i.postimg.cc/z3fBKT4G/C98-C08-BC-F5-E9-4-A19-B3-F2-9030-D4452305.jpg) (https://postimg.cc/z3fBKT4G)
-
https://www.youtube.com/watch?v=mmHpJ8vkpq8
-
Hi Pavel, what a beauty..
-
Beautiful model, looks and sounds fantastic!
-
That model looks museum quality. Well done
Tony
-
after three years the model has been completed
(https://i.postimg.cc/nswGV6C0/2-DDE095-D-C38-E-4-BF8-BEE8-FCDAC2893291.jpg) (https://postimg.cc/nswGV6C0)
(https://i.postimg.cc/R6k1KK1t/4-A464193-9633-4-D1-E-9255-9-B0-B4-DA85-A35.jpg) (https://postimg.cc/R6k1KK1t)
(https://i.postimg.cc/5jQnyN5v/5590-DBA6-55-EE-4252-AAF5-2-A28-B5-F32-F30.jpg) (https://postimg.cc/5jQnyN5v)
(https://i.postimg.cc/w7KFm8Fr/76-E490-DC-6060-47-F3-9133-B4-F295-B03-FB8.jpg) (https://postimg.cc/w7KFm8Fr)
(https://i.postimg.cc/QVFn7qDF/BAE7528-B-8-D13-471-B-84-C1-87-A7-B8-E199-BB.jpg) (https://postimg.cc/QVFn7qDF)
(https://i.postimg.cc/7Gd99p4f/C36-CABBC-4690-4-BB6-9-B5-F-DB85-CF58012-A.jpg) (https://postimg.cc/7Gd99p4f)
(https://i.postimg.cc/RWdTy39r/E3793828-C222-432-E-A980-7778-C15-AFD9-B.jpg) (https://postimg.cc/RWdTy39r)
(https://i.postimg.cc/v1mvsQH4/E7674-FCE-0470-4-A91-ACAA-51-B6-B27-AE265.jpg) (https://postimg.cc/v1mvsQH4)
(https://i.postimg.cc/Bj4gmTrc/F366-AFD5-A8-FF-42-F4-A910-D439791-F28-B4.jpg) (https://postimg.cc/Bj4gmTrc)
(https://i.postimg.cc/R66QWXt9/FC147-A2-E-535-B-4627-9-ED7-11-E61-D8-C30-F0.jpg) (https://postimg.cc/R66QWXt9)
-
beauty! :ThumbsUp:
-
Spectacular workmanship and detail! Thank you for sharing the build with us!
-
It has already been said before in this thread - but you deserve more compliments for your fantastic work here :praise2:
-
Amazing work! :o :ThumbsUp: :ThumbsUp:
-
Three years. What an accomplishment. You must be very proud of this outstanding model.
It is truly magnificent.
John
-
Wonderful attention to detail! :praise2:
John
-
https://www.youtube.com/watch?v=0thcX2FlfZ8
Steam test
-
https://www.youtube.com/watch?v=YjsiKBV3Kc8
-
What a great model Pavel, you gotta be proud of that :)
-
Beautiful Pavel
Is that singing noise the same typical noise a generator makes [the making and collapsing of the electrical fields] or the leather belt sequel under the tension?
Either way again :facepalm:
Derek
-
Beautiful Pavel
Is that singing noise the same typical noise a generator makes [the making and collapsing of the electrical fields] or the leather belt sequel under the tension?
Either way again :facepalm:
Derek
Hi Derek, You're right, it's a generator....I was surprised by the sound and I like it ...Pavel
-
Wow what an amazing model/s Pavel!
It is simply stunning.
Dave
-
Hi Pavel, very impressive. You should be very proud of it.
-
Hi Pavel, a beautiful model and amazing workmanship down to the smallest details. It has been most interesting to follow along.
MJM460
-
Gorgeous!
-
Pavel,
That's amazing! I am also surprized by the generator noise and like it.
Incfedible attention to detail. Everything is so precise and well done.
I have been following your posts on this and I knew if would be worth the wait.
Thank Your for posting,
ShopShoe
-
The whole thing is just amazing Pavel, from the boiler to the engine itself, to the steam pump and generator. What a fine example of model engineering at it's best!! Well done :ThumbsUp: :ThumbsUp:
Bill
-
Changing steam lubricators, those old cracked glass, is good to use glass with electronic cigarettes
(https://i.postimg.cc/LqGMxjC3/0-A2-C59-EE-7193-40-A9-BBEB-FEE54-F6-D6-B6-B.jpg) (https://postimg.cc/LqGMxjC3)
(https://i.postimg.cc/xkX2G6Rd/8331-D3-C3-AAB7-4153-937-C-B17-CA4-C46625.jpg) (https://postimg.cc/xkX2G6Rd)
(https://i.postimg.cc/MnPwjC14/8-BF11890-5-CCE-4747-9214-624-FB81047-C7.jpg) (https://postimg.cc/MnPwjC14)
-
Hi Pavel,
good to see that you have found a solution and improvement for your lubrication glasses.
It was a real pleasure to see your engines, boilers an the entire arrangements at this show in Austria last weekend.
I admire your attention for all the small details.
-
Thank you,
The steam lubricators will hopefully work. As for the details, I can still learn from you. There's still a lot to learn ..... Thank you for coming last weekend.
-
Excellent (as ever) :praise2: :praise2: :wine1:
-
Paval
A fantastic job!!!
It is a pity the early photos have gone missing. Have you moved the files in PostImage? If you have you will have to edit all your posts on here to get the images back.
Pete
-
the realism of the whole steam plan running under steam is truly amazing, from boiler to generator, including wall and basement, in every detail and part, beautiful work !
certainly a hot spot in a steam show !
-
(https://i.postimg.cc/8jr03bdc/1871-C0-C6-BB28-4-F0-E-9-F87-C5-D8-A337-F9-B7.jpg) (https://postimg.cc/8jr03bdc)
(https://i.postimg.cc/XrfDN7z0/2710-D31-B-5-B33-4036-9-CB6-1-A41061-F2-DE9.jpg) (https://postimg.cc/XrfDN7z0)
(https://i.postimg.cc/G9ffqfy6/2817-DF29-3156-4-E7-B-8843-200-DD5-B7-E778.jpg) (https://postimg.cc/G9ffqfy6)
(https://i.postimg.cc/NyQCKq32/2-A1-D50-AB-5180-4902-AE05-1-C71-C47194-EC.jpg) (https://postimg.cc/NyQCKq32)
(https://i.postimg.cc/YjvnGxsR/6-B15-D3-B6-EAFD-4-A22-B174-D8-D5-C24-C321-B.jpg) (https://postimg.cc/YjvnGxsR)
(https://i.postimg.cc/hXW5q7Mr/6-C13665-D-5-B0-A-41-A5-9028-890-CA8-B06-DE1.jpg) (https://postimg.cc/hXW5q7Mr)
(https://i.postimg.cc/rRRQB8r3/78434-F1-D-94-D8-40-A8-B503-D36164-AB0-BAE.jpg) (https://postimg.cc/rRRQB8r3)
(https://i.postimg.cc/vgN021c5/833370-F3-EAE8-407-C-802-E-B67-AC3-E562-AC.jpg) (https://postimg.cc/vgN021c5)
(https://i.postimg.cc/mhKdQHxs/94613795-339-F-4-B76-82-AF-310-D9-FB27630.jpg) (https://postimg.cc/mhKdQHxs)
(https://i.postimg.cc/3y9SpfhS/B0-BC5-BDD-458-C-4-DA1-B57-C-2-C1-C290-A62-E0.jpg) (https://postimg.cc/3y9SpfhS)
(https://i.postimg.cc/njzd1KcH/B316724-A-BB75-4011-9-F3-D-255224-D698-CE.jpg) (https://postimg.cc/njzd1KcH)
-
:ThumbsUp:
Incredible detail Pavel!
& it's nice to see how everyone is so involved, great show!
John
-
(https://i.postimg.cc/xXnCYbZD/282959-C2-877-A-491-B-8-AA1-E0-D58-FAC6800.jpg) (https://postimg.cc/xXnCYbZD)
(https://i.postimg.cc/67Qp4xwM/B46-D3666-2-BE1-4-A13-A124-C282-F365-B76-F.jpg) (https://postimg.cc/67Qp4xwM)
-
Beautiful engine and steam plant Pavel!
Thanks for sharing.
Dave