Model Engine Maker

About MEM => Introduce Yourself => Topic started by: Neil-Lickfold on January 10, 2019, 06:47:11 PM

Title: Neil Lickfold
Post by: Neil-Lickfold on January 10, 2019, 06:47:11 PM
Hi to all,
I'm Neil Lickfold,  currently a cnc machine operator / toolmaker, and also a model engine /full size  engine nut.
I have made quite a few model engines over the years, but my involvement has mainly been with Control line speed, team race, combat, stunt engines, as well as Pylon racing engines.
I like to look at new technologies of the day , and try new to me materials quite often.
I do most of my work on a Myford super 7 lathe and basic Mill drill, and a small cnc wood work router that uses mach3.
Neil
Title: Re: Neil Lickfold
Post by: Roger B on January 10, 2019, 06:54:16 PM
Welcome to the Forum  :ThumbsUp:  :ThumbsUp:

Pictures of engines and workshops are always welcome  :)
Title: Re: Neil Lickfold
Post by: steamer on January 10, 2019, 07:28:00 PM
Welcome Neil!
Title: Re: Neil Lickfold
Post by: b.lindsey on January 10, 2019, 07:34:57 PM
Hi Neil and  :hi:. Thanks for the introduction as well. Pictures would be wonderful too once you get settled in here.

Bill
Title: Re: Neil Lickfold
Post by: Ramon Wilson on January 10, 2019, 08:51:27 PM
Welcome Neil, good to see you here and looking forwards to having your input on model aircraft engines  :ThumbsUp:

Hope we live up to expectations

Regards - Tug
Title: Re: Neil Lickfold
Post by: Kim on January 11, 2019, 01:08:03 AM
Hi Neil,
Welcome to the forum!
Kim
Title: Re: Neil Lickfold
Post by: Dave Otto on January 11, 2019, 01:29:23 AM
Hi Neil, welcome to MEM!

Dae
Title: Re: Neil Lickfold
Post by: Smechie on January 11, 2019, 06:52:12 PM
Hey Neil,
I am new myself so welcome from smechie!
SimplePortal 2.3.5 © 2008-2012, SimplePortal