Model Engine Maker
Engines => Your Own Design => Topic started by: pgp001 on May 14, 2017, 11:27:07 AM
-
During the course of the last year I bought a packet of M1.2 Round Head Brass Screws approx 10 or 12mm long (they only need to be about 3mm long) to hold the cladding panels on my model mill engine. I have one screw left in stock so thought I would buy some more.
The problem is I have hunted every supplier I can think of to obtain these and nobody seems to do them. If I had not already had some I would assume they were not made, but I know they are.
Before I go completely mad can anyone on hear give me a clue where I might have bought them from. None of the suppliers at Doncaster show had any ideas either.
Thanks
Phil
-
12BA are 1.3mm - try EKP supplies: https://www.ekpsupplies.com/brass-roundhead-screws-slotted.html?page=1
-
The only round head brass bolt I know.
http://www.modellbauschrauben.de/index.php?m=03_21&lang=en
-
Phil,
I came across this forum thread which may be of interest :-
http://www.modelenginemaker.com/index.php?topic=628.0
I haven't checked all the links but may be worth a look.
Peter