Model Engine Maker

Supporting => Engine Ancillaries => Topic started by: cfellows on January 08, 2013, 03:05:10 AM

Title: Cutting a Cam Lobe
Post by: cfellows on January 08, 2013, 03:05:10 AM

This is a video I made of cutting a single cam lobe on a gear hub.  It uses a rotary table and a boring head.

http://www.youtube.com/watch?v=ohqO0GIdoLU (http://www.youtube.com/watch?v=ohqO0GIdoLU)

Chuck

Title: Re: Cutting a Cam Lobe
Post by: Camm-1 on January 08, 2013, 06:04:24 AM

Hi Chuck
Thank you , I been waiting for a video on this procedure! :praise2:
Ove

Title: Re: Cutting a Cam Lobe
Post by: ScroungerLee on January 08, 2013, 12:47:37 PM

Very nicely done video, thank you Chuck.

Lee

Title: Re: Cutting a Cam Lobe
Post by: Bill_S. on January 08, 2013, 06:08:51 PM

Chuck,
Neat video.  Thank you.
Bill