Model Engine Maker
Supporting => My Workshop => Topic started by: tangler on September 07, 2013, 10:21:04 AM
-
Folks,
Vince has enquired about the Worden grinder so here are a couple of pictures of mine. This is a fairly quick build from the Hemingway kit. The pictures show my own design ER 25 collet chuck for grinding end mills (which you may have seen in MEW)
Rod
(http://i104.photobucket.com/albums/m180/rod_sally/w1_zps02b12c3c.jpg)
(http://i104.photobucket.com/albums/m180/rod_sally/w2_zps1fd697ba.jpg)
-
Thanks Rod.
Do you know which MEW issue numbers you are referring to so that I can look them up?
Vince
-
Vince,
There's an article on building the Worden in MEW 71 and my collet chuck is in 198.
Rod