Model Engine Maker

Supporting => Tooling & Machines => Topic started by: dvbydt on May 08, 2018, 03:58:04 PM

Title: Handy lathe tools
Post by: dvbydt on May 08, 2018, 03:58:04 PM
Having made my little grinder, the first tools I made were these multipurpose toolbits.
One for brass and plastic and one for steel and aluminium.
80% of the work I do on the lathe in either steel or brass and one these two tools is my first choice and saves me scrabbling about in the box of previously made single ended tools.

Ian
SimplePortal 2.3.5 © 2008-2012, SimplePortal