Model Engine Maker

Supporting => Vehicles & Models => Topic started by: Johnmcc69 on March 19, 2014, 07:45:53 PM

Title: Rudy's Stirling tractor CAD drawing
Post by: Johnmcc69 on March 19, 2014, 07:45:53 PM

Let's see if this works..

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: Johnmcc69 on March 19, 2014, 09:31:15 PM

Thank you very much Mr. Bill Lindsey for posting these in my behalf. I'm having difficulty posting attachments here. Bill helped me out, so THANK YOU BILL!!
 
 Inspired by Frazer (fcheslop), I finally knocked this drawing off my "bucket list".
I don't have the  $ to buy machines, so I model 'em up.

Hope it helps, or inspires someone...

Thanks again Bill & Frazer, for your fantastic build & help!

 John

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: fcheslop on March 19, 2014, 10:33:20 PM

Hi John, If I may I will get them printed out and display them with the model at any shows she maybe entered in. As long as thats OK with you .
Just wish I could use a computer so well :NotWorthy: :NotWorthy: :NotWorthy: :NotWorthy:
That has cheered me up  a lot on a rather nasty day soooooo thank you.It has made me feel so much better about posting as its a thing I do have problems over.
best wishes
frazer

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: Johnmcc69 on March 19, 2014, 10:52:38 PM

Frazer, it was purely my pleasure creating them. You did a fantastic build of it & your writing & pic's were top notch. It's a splendid model.
give me a couple of day's & I'll incorpate your changes into it. If you need anything more
Specific or detailed, please don't be afraid to ask.

 John

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: fcheslop on March 19, 2014, 11:03:19 PM

Hi John, that would be fantastic.I really do appreciate the effort you have put into the drawings.
Would it be possible to water mark or add youre name to the drawings so that full credit can be  given to you .
many thanks
frazer

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: Johnmcc69 on March 19, 2014, 11:14:32 PM

My initials are in the corner..
 Full credit goes to Rudy.
 Give (PM) me your full name & I can add your name as the  builder shown on the drawing.

 John

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: fcheslop on March 19, 2014, 11:20:02 PM

Full name.but but the bobbies(police) may still be looking for me :Lol:
Frazer  Heslop
Cheers

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: fcheslop on March 20, 2014, 11:17:47 PM

Thank you John.
 :NotWorthy: :NotWorthy: :NotWorthy:

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: ChipMaker on January 22, 2015, 07:14:23 PM

I built Rudy's Stirling Tractor from plans in the Home Shop Machinist's magazine years ago.  After I completed it, I showed it to Rudy while I attended the NAMES show in Wyandotte, MI.  He gave me a "thumbs up" on my build.  I modified my build by making the burn wick height adjustable, changing the heat and speed of the engine.  I also added the later R/C (radio controlled) steering modification that appeared later in the magazine.  Your CAD drawings here, are a great item for display with the tractor.  Thanks, CM

Title: Re: Rudy's Stirling tractor CAD drawing
Post by: fcheslop on January 22, 2015, 08:46:41 PM

Hi, the drawings are a great asset :ThumbsUp:
Iv not seen the RC conversion as its not in the book I have
cheers