Model Engine Maker
About MEM => Introduce Yourself => Topic started by: RGS1000 on June 20, 2020, 12:21:34 PM
-
Hi Everyone
I've always been interested in all things mechanical and mainly spent my time restoring motorcycles, a couple of years ago I took early retirement and developed a interest in machining and steam engines in particular. I set about converting the single garage which is home to a couple of Laverdas into a workshop which is now also occupied by a Boxford aud lathe and a sieg mini mill.
To date I have completed two Stuart kits a V10 and a S50 and I'm now looking to progress onto a slightly more complex project ( ideas are more than welcome ) I have no formal training in machining and just learn as I go along, many mistakes have been made but hopefully learned from plus my education has been greatly enhanced by the more knowledgeable contributors on youtube.
Joe
-
Welcome! You have good taste in bikes - not hard to guess the model of your Laverda! A great love of all things Italian here, especially Guzzi and alfa (70's and earlier.)
You'll learn a lot here there are some fabulous builds.
-
Hi Joe,
Welcome to the forum! Join in the fun and share your build with us :)
Kim
-
Hi Joe
Welcome to MEM!
Dave
-
Welcome to the Forum :ThumbsUp: :ThumbsUp:
-
Thanks for the welcome, and yes Nick it is a bit of a giveaway using RGS as a username although I do have 1973 SF1 750 that I bought as pretty much a basket case 3 years ago and is almost ready for the road following a complete restoration using as many as the original parts as possible, just a bit of wiring to do and all should be ready to go.
Like the old Guzzi's but never had one myself but a couple of friends have them, just can't beat the Italians for style.
Joe
-
:hi: Joe
Like the old Guzzi's but never had one myself but a couple of friends have them, just can't beat the Italians for style.
I like Guzzis as well but while British bikes would leave a puddle of oil where ever you parked them Guzzis left a little rust behind ::)
Jo
-
Hi Joe,
I'm also in Northamptonshire, (close to J16 of the M1) would be good to meet up sometime once normality returns to discuss engines and bikes!
Simon.
-
That would be good Simon will look forward to it.
Joe
-
Hi, I am also in Northamptonshire, Boughton.
I am much more of a newbie, I don't even own a lathe. I do have model helicopters though.
-
Hi Mike,
Helicopters are addictive - Gaui 200 and Walkera V120D02 here.
Simon.