Model Engine Maker
The Showcase => Engines => Topic started by: AOG on May 13, 2017, 06:57:51 PM
-
It's done and we have a runner.
(https://uploads.tapatalk-cdn.com/20170513/1f466c7a8f3d9597251c7f0c8fc67159.jpg)
(https://uploads.tapatalk-cdn.com/20170513/505815662a0deedeb723422a83765290.jpg)
(https://uploads.tapatalk-cdn.com/20170513/3a30065e4cd572d12533fad69a297ad2.jpg)
Here's the video of it running.
https://vimeo.com/217314359 (https://vimeo.com/217314359)
Till next time
Tony
Sent from my iPad using Tapatalk
-
Congratulations on a fine runner and a nice paint job :ThumbsUp:
-
Cute little runner Tony. Is that Hammerite paint?
Vince
-
Great runner there Tony! :ThumbsUp: ;D
Its a tiny little thing! A lot smaller than I'd pictured.
Kim
-
Thanks everyone, Vince it's Rustolum "hammered" paint.
Tony
-
Very nice Tony and runs very well too. I am like Kim, that's either a huge vise or the engine is smaller than I had imagined as well.
Bill
-
It is a tiny engine. Here is a pic of it on the bench with a PM 2A and the Reeves Popular. The ST is on the left. The center engine is the PM 2A and the one on the right is the Popular.
(https://uploads.tapatalk-cdn.com/20170514/cb0b922aeddccc21d6cf3410d4ca98e3.jpg)
Tony
Sent from my iPad using Tapatalk
-
HI Tony,
Just found this thread. After seeing your other Stuart I looked at the Stuart range and purchased the ST. Glad I found your build thread.
Ben.