Model Engine Maker
General Category => Chatterbox => Topic started by: sshire on January 11, 2019, 11:04:15 PM
-
Where’s Stan seems to be (for some unexplainable reason) a pressing question.
Yes. I will be at Cabin Fever with at least one new engine and possibly two.
Elmer’s 24 is done. Last week I decided to build on elbow engine. Should be ready????
Re: Cabin Fever. For some reason, I became the Director of Saving Seats. Here’s the new plan.
I’ll put down 10 “Reserved for MEM” signs. I know that Scott, Dave and I will be there. If’n the creek don’t rise, Cletus may actually show. The remaining 6 seats are first come, first occupied.
I realized that I was spending more time on the forum and creating build logs than I spent actually making parts. That caused me to go on a “Forum Hiatus.”
Cletus suggested that this may be the reason that I disappeared.
https://www.youtube.com/watch?v=UtkxhiJql8A
In addition, I’ve whiled away the hours, conversing with the flowers and…
Organizing screws
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0862.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0862.jpg.html)
Still working on the Simpson and Shipton
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0861.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0861.jpg.html)
Playing the banjo
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_4601.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_4601.jpg.html)
Fred’s Gun Day
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_4692.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_4692.jpg.html)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_4685.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_4685.jpg.html)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_4682.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_4682.jpg.html)
Wilton Bullet Restoration
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0357.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0357.jpg.html)
Getting better with the CNC
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0341.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0341.jpg.html)
Lots of “Practice”
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0153.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0153.jpg.html)
Restoring a Brown and Sharpe Screw Machine Knurling Tool
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0147.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0147.jpg.html)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0145.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0145.jpg.html)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0138.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0138.jpg.html)
Volunteering at The Museum of the American Revolution (spoiler alert. We won.)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0074.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0074.jpg.html)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0104.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0104.jpg.html)
Copying a Starrett Tap Wrench for Fred’s birthday
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0060.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0060.jpg.html)
Making a nameplate for my wife’s birthday present grill to match the Weber plate.
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0015.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0015.jpg.html)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0014.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0014.jpg.html)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0013.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0013.jpg.html)
A swivel knife to cut gaskets on the CNC mill
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_0002.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_0002.jpg.html)
And, a Busker Organ
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_9827.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_9827.jpg.html)
(http://i1126.photobucket.com/albums/l604/sshire/Wheres%20Cletus/IMG_9822.jpg) (http://s1126.photobucket.com/user/sshire/media/Wheres%20Cletus/IMG_9822.jpg.html)
That’s about it.
Hope to see a lot of people at Cabin Fever
-
Well at least you have been keeping busy!
Lots of nice work going on there, well except maybe for some of those trial cylinders. :)
Nice vise! I like the jaws.
Good to see you are still with us.
Dave
-
Where were you shooting?
Dave
-
Great to see you Stan. Looks like you got a lot done during the haitus too!!
Bill
-
Shooting occurred at Fred's weekend cottage on the Susquehanna River. We were pretty careful not to aim towards the nuclear power plant across the river. :lolb:
Gun Day happens twice a year. Great fun
-
Glad you are doing well and having fun Stan!
-
Happy to see that you are enjoying life Stan. Some very fine work there as well some fun activities.
-Bob
-
Shooting occurred at Fred's weekend cottage on the Susquehanna River. We were pretty careful not to aim towards the nuclear power plant across the river. :lolb:
Gun Day happens twice a year. Great fun
Yeah....the guys in the black suites and the earbuds get kinda cranky when you do that.....Just sayin.
-
This is Pennsylvania Dave, not Massachusetts. Plus, I think the two Daisy Red Ryders are pretty safe.
-Bob
-
Great to see what you have been working on.
I'm really looking forward to seeing my model engine building friends next week at Cabin Fever.
Scott
-
You really have been busy. :ThumbsUp: :ThumbsUp:
Vince
-
Hey guys
All of that keeps me off the street and out of bars
-
Stan,
Great to see you are staying busy and are doing well. I am planning to be at CF Friday & Saturday and look forward to seeing everyone.
Art
-
good to hear you are well and having fun!
A swivel knife to cut gaskets on the CNC mill
You know you could just buy the wife a crickut machine . I have heard they are fantastic for cutting custom gaskets
there maker top of the line machine is only 349 usd may be able to find a deal on craigs list.
-
Well I’ll be a son of a diddly, Vern has re-entered the building. Looks like you have been enjoying yourself. Hey, ain’t anything wrong with being on the streets or in the bars as long as they are the right ones :lolb:. Man, I could have used that knurling tool today. Talk to you soon: don’t make yourself so damn scarce anymore now you hear.
Cletus
-
Tin
The cricut was my first thought, but you’re operating under the assumption that she’s crafty. Great cook, damn good golfer. Crafty? Not.
In any case, what fun would that be when I could spend untold hours and three design iterations to build a swivel cutter.
Cletus
I’m definitely back. Y’all come to CF you hear?