Model Engine Maker

Supporting => Tooling & Machines => Topic started by: sbwhart on March 25, 2018, 04:55:17 PM

Title: Perfecto Shaper
Post by: sbwhart on March 25, 2018, 04:55:17 PM

I've just acquired a Perfecto Shaper I think its a no 3 the 5" stroke model, its complete except for the tool holder and drive belt and the motor needs mounting and wiring up and the drive pulley needs re-bushing, but all sortable issues.

I've emailed lathes.co for information/manual.

But has any one got any info on it, particularly regarding the size of V belt

Her's a few pictures of it hot off the press.

(https://i.imgur.com/pwhB3TCl.jpg)

(https://i.imgur.com/qpPFn2Rl.jpg)

(https://i.imgur.com/3HNlTmCl.jpg)

(https://i.imgur.com/9BAEY0ml.jpg)

Cheers
Stew

Title: Re: Perfecto Shaper
Post by: b.lindsey on March 25, 2018, 06:41:56 PM

Can't help with the questions Stew, but it sure looks to be in good shape.

Bill