Model Engine Maker
The Showcase => Engines => Topic started by: AOG on September 09, 2018, 09:42:05 PM
-
It’s done and she’s a runner.
(https://uploads.tapatalk-cdn.com/20180909/5d5ad2667ef034f34717d476c2947e61.jpg)
(https://uploads.tapatalk-cdn.com/20180909/2f1e14704d16545de1866cd5e2541e47.jpg)
(https://uploads.tapatalk-cdn.com/20180909/40663941cbf915b085cf58133a0f0223.jpg)
Next is the video. Please excuse the knocking. It turns out the piston rod had backed out of the crosshead causing the piston to strike the end cap.
https://vimeo.com/288989190 (https://vimeo.com/288989190)
Till next time.
Tony
Sent from my iPad using Tapatalk
-
Runs nice and slow too Tony. Well done!! :whoohoo:
Bill
-
That is a lovely runner - superb!
-
Congrats! Looks a good runner.
Seems that was pretty quick work too. :ThumbsUp:
-
Yes! Congratulations on an excellent runner! It's always so exciting when you get them running, isn't it.
Kim
-
Very nice it is! :ThumbsUp:
Pete
-
Congratulations with a very nice runner :praise2:
-
Thanks everyone, it was a fun little project.
Tony
-
Looks good, sounds good 8)