Model Engine Maker
Supporting => Engine Ancillaries => Topic started by: stevehuckss396 on April 04, 2019, 02:34:01 PM
-
Hello everyone!
The spark plug store is officially open. A few years ago I purchased all of Dale Detrich's stock and parts to make his side fire plugs. I have also made 3 of my own design with the standard ground strap design. I have in stock . .
6-56
8-40
10-40
1/4-32
If interested you can contact me by phone but email is better because I still work 70 hrs a week. To see what I have to offer you can go to www.miniaturesparkplugs.com. To order contact me at stevehuckss396@gmail.com or call but you might catch me at work.
With NAMES coming up I can't officially sell plugs at the show but if you want to save a few on shipping you can purchase and then pick them up from me there. Just look for the giant sparkplug.
Thank you.
-
Good stuff people! Steve is making a great product!
Dave
-
Just want to let everyone know that I have had a few reports about the threads on my plugs being a little tight. I check every base with a go-no go gage set to be sure they are correctly sized. The trouble might be from cheap taps. If you run into that trouble try buying a good quality tap made in the USA, Poland, Japan, or Germany. As they can be expensive and may only be used a few times, or you already purchased the cheaper tap, try bumping up the tap drill one size and see if that eases the fit.
I have found some good taps in 6-56 (Japan) and 1/4-32 (USA). They are available on the website. I have my eyes pealed for 8 and 10 - 40. If I can find them for a reasonable price I will get them up also.