Model Engine Maker
Engines => From Plans => Topic started by: Firebird on December 27, 2016, 09:15:05 PM
-
Hi
I am embarking on my first steam loco build, Conway a 3 1/2" gauge 0-4-0 freelance. Originally published in Model Engineer magazine in the 1980's its a Martin Evans design.
I understand this forum doesn't do loco's so I'll gauge reaction and interest and seek guidance from the moderators before I continue.
It may be some of the members have built loco's in which case I would like to seek their advice on the (probably many) occasions I get stuck.
Let me know
Cheers
Rich
-
Rich,
You can certainly post a loco build on the forum as there have been others. I should be put under the Vehicles and Models section under the "Supporting" heading.
Bill