Model Engine Maker
Supporting => Engine Ancillaries => Topic started by: Mosey on December 13, 2012, 12:55:09 AM
-
I have 1/4 x 32 threads in the head. What plugs are available to fit this?
-
Mosey,
You can try these folks...not affiliated...I'm sure there are more out there too...
http://www.cncengines.com/rc.html
or...
http://sparkplugs.morrisonandmarvin.com/14-32.php
Dave
-
Mosey you can also get the spark plug from Margret Shore where you bought the casting. Or Jerry Howell site.
Don
-
Thanks for the information on the plugs. I will follow up with those sources. I have 1 Rimfire from my Farm Engine.
I will be back later with a question about the suggested ignition systems. I have a points and coil system also, made by Modelectric, that I might use if it will work for a 2 cylinder engine.
-
I have had Dales plugs in my Peewee for years and they are still working like new.
http://www.daledetrich.com/