Model Engine Maker
Engines => Your Own Design => Topic started by: rarach22 on March 19, 2014, 01:27:19 PM
-
(http://2i.cz/2i/t/bcc85872a1.jpg) (http://2i.cz/bcc85872a1)
-
Hi Pavel,
Those are some nice valves. Any "build" pictures or drawings? The collecto-manaics of us on this forum just love both! If not, ah well, can you tell us a little about them please.
Cheers Kerrin
-
http://www.uloz.to/x23kkKqP/vykres1-dwg
http://www.uloz.to/xCJPPmDH/par-c-8-dwg
http://www.uloz.to/xTWVVgbe/corliss-2-dwg
http://www.uloz.to/xrCcctwJ/corliss-dwg
-
http://www.uloz.to/x23kkKqP/vykres1-dwg
http://www.uloz.to/xCJPPmDH/par-c-8-dwg
http://www.uloz.to/xTWVVgbe/corliss-2-dwg
http://www.uloz.to/xrCcctwJ/corliss-dwg
http://www.uloz.to/xGQG64Yt/par-c-8-dxf
http://www.uloz.to/xMPHS6P5/corliss-2-dxf
http://www.uloz.to/xyBqEH6z/corliss-dxf
http://www.uloz.to/xzCmtWEa/vykres1-dxf
-
Hi, here are few links on some of my motor drawings. Pavel
-
Nice work on the valves. Those are Deluxe!
-
Hi Pavel, nice work. Your drawings are looking very similar to mine. It seems we are using a similar not "ISO" standard style.
-
Very nice work Pavel :ThumbsUp: Are you aware of the technique of using an engraving tool to give a cast effect to the surfaces ?
Ramon
-
Very nice work on the valves! :ThumbsUp:
Dave
-
Very nice work Pavel :ThumbsUp: Are you aware of the technique of using an engraving tool to give a cast effect to the surfaces ?
Ramon
Yes, I know the product is photographed before Finishes Pavel