Model Engine Maker
Supporting => Tooling & Machines => Topic started by: mklotz on March 27, 2015, 05:37:59 PM
-
A considerable number of forum members have lathes that use change gears to achieve the correct feed for cutting threads. This leads to the problem of calculating gear setups for a particular desired pitch.
Recently, I saw a post on HSM on this subject and one response included the link to this...
http://www.gizmology.net/changegears.htm
page.
The presentation looked well thought out and so I decided to pass it along for gearheads to add to their reference bookmarks. [Actually, given the finite lifetime of web pages, you may want to copy it and store it locally.]