Model Engine Maker
Supporting => Engine Ancillaries => Topic started by: stevehuckss396 on April 16, 2016, 06:11:07 PM
-
Hello Gents!
I was going to setup my mill and vacuum table to cut gaskets for the demon. A model engine forum member offered to cut them with the laser and suggested I make a big pile while the machine was setup. So I did and now i have more than i'll ever need. Even with the fantastic deal on the laser work, I still have more than a few bucks into them. If any of you Demon builders are going to NAMES and are interested I could probably be talked out of some for a small donation. (I'm not a vendor so I cant sell them.)
-
I would like to thank everyone who purchased the gaskets. They have all been posted and are on there way to you. I hope you are all pleased with the quality of the gaskets and are able to use them soon!!
Cheers!
Steve
-
Hello Everyone! Just wanted to let the Demon builders know that the gaskets are now listed on the website with the spark plugs. Also there are spark plug insulating boots available for the #8 plugs as well as the 10's and 6's.
www.miniaturesparkplugs.com
-
hello steve john here from new zealand with your plugs and things do you ship international i have plugs for the little ford but they are a little short in the reach
-
Yes I do ship out of the country. Sent to Australia and Canada last week. I cannot provide a tracking number so it's a crap shoot but I have never had a shipment fail to arrive. I have been very lucky so far.
-
thanks i will wait until things get more normal then i will be in contact
-
No problem, I will be here.