Model Engine Maker
General Category => Outside Links & Suggested Reading => Topic started by: Gas_mantle on June 25, 2017, 05:51:36 PM
-
I stumbled across these 2 video that I thought maybe of interest to a few members.
It looks like with a cheap shop bought kit reasonably attractive results can be achieved :-
https://www.youtube.com/watch?v=9oJxKkUosSk
https://www.youtube.com/watch?v=R996VNyPXbs
-
I have used the Caswell plating on a number of occasions with reasonable success. The plating is rather thin and can wear quickly but is fine for static parts. All the brass pieces on this http://www.modelenginemaker.com/index.php/topic,4084.0.html engine were plated using the Caswell system.