Model Engine Maker

Supporting => Vehicles & Models => Topic started by: juandedios on February 25, 2014, 09:44:24 PM

Title: Autovapor Mad Max - homemade
Post by: juandedios on February 25, 2014, 09:44:24 PM
Hello,
I would like to show the first engine I built.
I've designed and built only with an electric drill and hand tools.
This is the first time it worked, it was the third attempt:

(http://imagizer.imageshack.us/v2/800x600q90/534/2l8s.png)

https://www.youtube.com/watch?v=3ToSUAvUF34

My wife told me to do a vehicle and built this:

(http://imagizer.imageshack.us/v2/800x600q90/819/a9mm.jpg)

This video shows the first test:

https://www.youtube.com/watch?v=Rf9X8KNWccE

Next evolution:

https://www.youtube.com/watch?v=EZbFwN8DtGc

Greetings and thanks.
Title: Re: Autovapor Mad Max - homemade
Post by: stevehuckss396 on February 25, 2014, 09:48:37 PM
For hand tools and a drill you have created some really cool items. Great job man!
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on February 25, 2014, 09:57:39 PM
Thank you.

I have greatly improved with the construction of vehicle wheels and a few other things:

(http://imagizer.imageshack.us/v2/800x600q90/59/t7s7.png)

https://www.youtube.com/watch?v=RUJIge09aOc

Greetings friends.

Title: Re: Autovapor Mad Max - homemade
Post by: tvoght on February 25, 2014, 10:03:26 PM
I'm very impressed with your work, Jaun, Welcome here.

--Tim
Title: Re: Autovapor Mad Max - homemade
Post by: zeeprogrammer on February 25, 2014, 10:49:25 PM
A first engine with boiler is pretty amazing.
I'm betting you had a lot of fun with that.
Title: Re: Autovapor Mad Max - homemade
Post by: Robert Hornby on February 25, 2014, 11:37:41 PM
Very well done Juan, I am trying to imagine what you could achieve when you have a lathe and mill. :NotWorthy:
Robert
Title: Re: Autovapor Mad Max - homemade
Post by: Kim on February 26, 2014, 05:47:26 AM
Very cool models Juan!
That's pretty amazing work!  And to have done it with such minimal tools is truly incredible!
Thanks for sharing the pictures and videos with us!
Kim
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on February 26, 2014, 07:57:32 PM
Thank you for your message. I am very happy to be with you.

The vehicle had trouble turning. To fix it I built a spread.
Changed rear traction and steering axis front.
It works much better, this video shows the result:

https://www.youtube.com/watch?v=144xil1-5-4

(http://imagizer.imageshack.us/v2/800x600q90/707/7l0e.jpg)

Greetings to all,
Juan de Dios.
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on February 27, 2014, 07:58:19 PM
Hello,

As weighed 21lb lacked strength.
I changed the cylinder 1/2 "to another 5/8". The power increase is remarkable.
(http://imagizer.imageshack.us/v2/640x480q90/62/i7o7.jpg)

https://www.youtube.com/watch?v=SmR_PV4cwSw

Engine Features:
1 double-acting cylinder.
diameter: 5/8 "
stroke:  1 27/32 "

This project has helped me to learn. When I did not know how to weld, I've never seen an engine, only in photos. The experience has been rewarding.
I am currently building a bigger boiler, I hope it has improved. When the show's finished.


Learned what I am building a 2-cylinder engine. I will create a new topic in "Design Your Own"

(http://imagizer.imageshack.us/v2/320x240q90/689/lru0.png)

I do not put more text for the difficulty me, sorry.
Thanks mates,
Juan de Dios.



Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on March 08, 2014, 09:32:33 AM
Hi friends,
I want to show my design for the new boiler of my vehicle.
The largest copper tube that I have is 54 mm. in diameter. I have designed a double boiler for greater capacity.
I'm cutting the pieces.

(http://imagizer.imageshack.us/v2/640x480q90/89/nl9m.jpg)

Greetings.
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on April 12, 2014, 10:52:28 PM
Hello,
I have prepared all the pieces of the boiler and have welded copper rod phosphate one of the bodies.

(http://imagizer.imageshack.us/v2/320x240q90/811/xv5p.jpg)   (http://imagizer.imageshack.us/v2/320x240q90/132/o9rz.jpg)  (http://imagizer.imageshack.us/v2/320x240q90/706/3x42.jpg)

(http://imagizer.imageshack.us/v2/640x480q90/834/lg7a.jpg)

Wanted to make sure everything was fine doing a pressure test with water. To pump the water to the boiler I made a non-return valve and a cylinder with a piston to inject the water (build another non-return valve and fabricate pump) to try to fill it with water and placed a pressure gauge, to push strongly reaches 12 Kg / cm2.

(http://imagizer.imageshack.us/v2/320x240q90/706/0j0h.jpg)   (http://imagizer.imageshack.us/v2/320x240q90/836/l8e9.jpg)   (http://imagizer.imageshack.us/v2/320x240q90/59/lsj9.jpg)

Tapé all the holes in the boiler, fill with water taking care not to let air in, put the check valve and connect the "syringe" giving pressure to the 13Kg./cm2. There is a small leak so I've reviewed the welds and will try. The end caps are slightly deformed due to pressure but have held up well considering the boiler worked to a maximum of 3kg/cm2.

Greetings.
Title: Re: Autovapor Mad Max - homemade
Post by: hammer on April 13, 2014, 12:14:37 PM
I do like your double boiler. Here is mine, bigger at 63mm tube with 28mm fire tubes so I could get a low centre of gravity.
Title: Autovapor Mad Max - homemade
Post by: ths on April 13, 2014, 12:41:30 PM
Hi Juan, some great stuff here, love the videos. What is the material used to line the boiler casing in the last photo?

Cheers, Hugh.

(Just realised it was Hammers response, beg your pardon!)
Title: Re: Autovapor Mad Max - homemade
Post by: zeeprogrammer on April 13, 2014, 12:59:11 PM
Following along Juan.
I enjoyed the videos.

I hadn't seen a double boiler before. I'll be interested in seeing more.
Title: Re: Autovapor Mad Max - homemade
Post by: hammer on April 13, 2014, 07:19:56 PM
Not high jacking Juan's build Hugh. But I will tell you it is plumbers soldering mat.    :hammerbash:
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on April 14, 2014, 08:56:16 PM
Thanks Hammer,
Your boiler is superb. Where there are more photos and information.
I do not understand your last post, sorry.

Hello Cheers,
The boiler is copper tube 1.5 mm. thick.
In the last picture shows just a body. When you finish the other body will unite.


Hello Zeeprogrammer,
There are few double boilers, look at the Hammer is very good.

Thank you all for your messages.
Greetings fellow.
Title: Re: Autovapor Mad Max - homemade
Post by: hammer on April 30, 2014, 02:25:53 PM
Juan, do not worry about not understanding some of my last post, lost in the translation I guess. 
Difficulty getting photos as the boiler is in a boat. That is the reason for the twin boiler as I need the centre of gravity as low as possible.  I do have another boiler of strange design which was fitted to this boat  before.  I will look out some photos of this and post later . Hammer
Title: Re: Autovapor Mad Max - homemade
Post by: ths on April 30, 2014, 09:16:13 PM
Nice boat. Who is she? Hugh.
Title: Re: Autovapor Mad Max - homemade
Post by: hammer on April 30, 2014, 09:27:18 PM
P.S. Duke of Devonshire. The complete build can be seen on http://www.paddleducks.co.uk/smf/index.php?topic=5011.0
Title: Re: Autovapor Mad Max - homemade
Post by: ths on May 01, 2014, 09:37:24 AM
Ah!
Title: Re: Autovapor Mad Max - homemade
Post by: hammer on May 01, 2014, 03:08:52 PM
This may be of interest  the first boiler in the boat. Build can be seen on http://www.paddleducks.co.uk/smf/index.php?topic=5011.0
Title: Re: Autovapor Mad Max - homemade
Post by: ths on May 01, 2014, 09:23:47 PM
I know that boiler, it's in the Harris book, but can't think of its name. How does it go in comparison to more conventional types? I'll have a look at the build log when I've got a bit more time. Hugh.
Title: Re: Autovapor Mad Max - homemade
Post by: hammer on May 02, 2014, 04:10:52 PM
I must apologise to Juan for invading his site.
Hugh, Mister wedge designed the original boiler & it takes its name from that, Wedge Boiler nothing to do with shape. The reason for the new boiler was to get the centre of gravity lower. The other disadvantage with the wedge it needs a good supply pump, not connected in the video so hand pump in use.  See running here. https://www.youtube.com/watch?v=KtMKpGHblHc
Title: Re: Autovapor Mad Max - homemade
Post by: ths on May 02, 2014, 09:10:11 PM
Thanks for that, do you have a powered pump fitted yet?
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on May 20, 2014, 08:22:49 PM
Hello fellow,

I have looked at the links and videos that comment. I liked and I've learned.
They can post whatever they want, I do not care, it's a compliment to me, thanks.

Can not imagine what it cost me to make welds with copper, because of course my lack of experience, but has helped me to begin to control things a bit.
Soldiers and the two bodies leak I proceeded to unite them and to have them pressure test to 10 Kg
So much was clear but had not thought beyond, after thinking many hours I got to work with the smoke box and subsequently the home.

(http://i1254.photobucket.com/albums/hh608/enginesjohn/Cajadehumos2_zpsdd53f058.jpg)

(http://i1254.photobucket.com/albums/hh608/enginesjohn/Hogar1_zpsefa2fd6c.jpg)

I'm happy with the result and some first tests I've done I think will give good performance. Now think of the burner that had not yet clear to me either.

(http://i1254.photobucket.com/albums/hh608/enginesjohn/Calderadoble_zps49e9254f.jpg)

Greetings to all.
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on September 12, 2015, 11:41:14 AM
Hello!

 I have had some personal problems and I have not made works. I am already better and I decided to construct an alcohol burner for the boiler:

(https://imagizer.imageshack.us/v2/783x587q90/901/QrZEpp.jpg)

I have connected the boiler to the motor of two cylinders and this it is its aspect:

(https://imagizer.imageshack.us/v2/798x599q90/661/paySyv.jpg)

This it is the video of the test:

https://www.youtube.com/watch?v=8DDuivshieM

 Greetings.
Title: Re: Autovapor Mad Max - homemade
Post by: tvoght on September 12, 2015, 12:49:40 PM
Welcome back Juan. The engine runs wonderfully! Glad to see it.

--Tim
Title: Re: Autovapor Mad Max - homemade
Post by: hammer on September 12, 2015, 08:44:12 PM
Juan. I do like your work.
 As for my wedge boiler I did fit a pump driven off the paddle shaft. With a bypass valve fitted. But I was given 200mm of 60mm copper tube, so I have built a twin tube boiler similar to yours. Mine if a fire tube as opposed to a pot boiler as yours.
Title: Re: Autovapor Mad Max - homemade
Post by: fumopuc on September 13, 2015, 04:27:21 AM
Hi Juan, good to see you back in the shop. This engine is running like hell. Do you build a boat for it ?
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on March 05, 2016, 10:26:17 AM
Friends thank you very much for your comments.
 I want to show the progress:

(http://s2.subirimagenes.com/fotos/previo/thump_9531728vehculo-a-vaporengin.jpg)

test video:

https://www.youtube.com/watch?v=8RasakCxJvs

regards.

Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on March 21, 2016, 06:53:07 PM
Juan. I do like your work.
 As for my wedge boiler I did fit a pump driven off the paddle shaft. With a bypass valve fitted. But I was given 200mm of 60mm copper tube, so I have built a twin tube boiler similar to yours. Mine if a fire tube as opposed to a pot boiler as yours.
Hi,
HAMMER thanks for showing your boiler, is similar to mine. I learn a lot from watching you work.

This video shows how to built my boiler:
https://www.youtube.com/watch?v=VAkvTyHTHuY

As they saw the car now has direction:

https://www.youtube.com/watch?v=7CcQHTlhg3s

Also it changes the transmission ratio of 3: 1 to 2: 1, even more can be decreased for speed.

Greetings.
Title: Re: Autovapor Mad Max - homemade
Post by: juandedios on April 14, 2016, 06:39:35 PM
Hi,
I changed the wheels to the car.
This video shows the construction and final result:

https://www.youtube.com/watch?v=efdDe5rCbUY

Greetings.
Title: Re: Autovapor Mad Max - homemade
Post by: Admiral_dk on April 14, 2016, 07:45:57 PM
The new wheels are good looking - nice work  :ThumbsUp:
SimplePortal 2.3.5 © 2008-2012, SimplePortal