Model Engine Maker
About MEM => Introduce Yourself => Topic started by: vickentallen on August 04, 2018, 11:18:24 PM
-
Hi All, I'm a retired marine engineer, on the North West Highlands of Scotland, I pass the time restoring old motorcycles, mostly Vincent's and Bevel Ducati's, I have a small machine shop tacked on to the side of the cottage,, Main machines are Colchester Bantam lathe & Centec 2b Mill along with Alexander T & CG. etc,,,,, Joined the site after buying a 4D Holdridge Radii cutter, from USA and reading the forum posts of like minded souls on here which yealded much information.... Enough for now that's the gist best wishes all Vic Scott
-
Welcome Vick to the Forum.
Have a great day,
Thomas
-
Hi Vick, and welcome to the forum. Perhaps we can interest you in making some model engines as well.
Bill
-
Hi Bill, Thanks for the welcome, I'm afraid the eyesight is on the way out, to tackle small work, my engineering accuracy now relies more and more on a 2 Lb hammer.
Best Wishes, Vic..
-
Welcome to the forum. :ThumbsUp:
-
Hi Vic, welcome!
Kim
-
Welcome to the Forum :ThumbsUp: :ThumbsUp:
-
Hi Vic
Welcome to MEM!
Dave