Model Engine Maker

Engines => Your Own Design => Topic started by: Malevthi on March 29, 2016, 10:25:59 PM

Title: 15cm3 Hackworth-Marshall
Post by: Malevthi on March 29, 2016, 10:25:59 PM

Hello,
I drew this twin engine. ( 0.91in3 )
"Verdon"
It was built by Max Rousseau:
https://www.youtube.com/watch?v=MFykZLXvp3Y

Title: Re: 15cm3 Hackworth-Marshall
Post by: yogi on March 31, 2016, 01:06:31 AM

Very interesting!  :ThumbsUp:
What's the valve gear you are using on this engine? Maybe you could post some close up pictures.
Thanks for sharing. 

Title: Re: 15cm3 Hackworth-Marshall
Post by: Jo on March 31, 2016, 08:20:44 AM

Nice little engine  8)

Thierry, are the drawings available for it ?

Jo

Title: Re: 15cm3 Hackworth-Marshall
Post by: Malevthi on March 31, 2016, 10:56:16 AM

(https://lh3.googleusercontent.com/-XxnVjar587k/TcTvKPColyI/AAAAAAAAE3M/07TDyWojfk0Zhzx8kuorFJ2o4tRWsC3lgCCo/s640-Ic42/VerdonMax6.JPG)
(https://lh3.googleusercontent.com/-eyqfW9_kuSM/UwPZ5hXydAI/AAAAAAAAE4A/-PtcZrFxnRcoXdiGC8JnpO8NYhFZB368QCCo/s799-Ic42/VerdonMax8.JPG)
The drawings are available. I soon put them.

Title: Re: 15cm3 Hackworth-Marshall
Post by: Malevthi on March 31, 2016, 01:54:38 PM

Here drawings

Title: Re: 15cm3 Hackworth-Marshall
Post by: Malevthi on March 31, 2016, 01:57:51 PM

The following

Title: Re: 15cm3 Hackworth-Marshall
Post by: Jo on March 31, 2016, 01:58:09 PM

Thanks Thierry.

I think a few of out members might find your engine very tempting to make  8)

Jo

Title: Re: 15cm3 Hackworth-Marshall
Post by: tvoght on March 31, 2016, 03:03:35 PM

Those are very nicely done drawings for an attractive engine, Thierry. Thanks for posting them.

--Tim

Title: Re: 15cm3 Hackworth-Marshall
Post by: Malevthi on March 31, 2016, 03:57:51 PM

Thank you for the compliments

I added 2 ball bearings
(https://lh3.googleusercontent.com/-XzhE9hc5z_M/Vv06gL3OgxI/AAAAAAAAFnI/nj82wC6VCpEccSdhTFBvEWcp_LWKTnxAACCo/s512-Ic42/DSCN0204.JPG)