Model Engine Maker
About MEM => Introduce Yourself => Topic started by: Will_D on January 12, 2015, 08:43:30 PM
-
Hi Guys,
Just renewing some ME interests.
I am a homebrwer with a workshop so guess what I get:
"Hi Will, Could you 'JUST' drill this out to 13 mm (in 316 Stainless), Oh and by the way I have already work hardened it for you by burning out some 6mm drills"
I used to live in Ashton-u-Lyne (NE Manchester in UK) and was fairly involved with Rochdale MES
Now living in Dublin, Ireland (For 23 years)
So if any one from RMES is here I would love to hear from you
May even get round to finishing my 3 1/2" Rob Roy now that I'm retired.
Found you through a reference on MadModder site!
-
Welcome to MEM Will. Glad to have you join us!!
Bill
-
Welcome to the forum Will, good to have you here.
Cheers, Hugh.
-
Welcome aboard Will!
Home brewing is a great hobby; I just wish that I had more time for it.
Dave
-
Hi Will and welcome to the forum!
Don
-
Welcome to the forum Will.
Jim
-
Hi Will and glad you found us.
Vince
-
G'day from downunder Will.
As you might have noticed, pretty multicultural mob here.
I think there is a Zeemap for you to stick a pin in if you wish!
* Danny M *
-
Hi Will, welcome to the group.
-
Welcome to MEM :hi:
-
Hi Will, welcome to MEM!
Kim