Model Engine Maker
The Showcase => Engines => Topic started by: gbritnell on July 28, 2018, 07:43:53 PM
-
Although I have some more small parts to make, valves and railings, the engine is complete and running.
Thanks to all who followed the build.
gbritnell
https://www.youtube.com/watch?v=j9UeFpsktRA
-
Quite impressive! Very well done, quite quickly too!
-
Is that cool or what?
Fantastic George.
I can't believe it. And so quickly too! :ThumbsUp: :ThumbsUp: :ThumbsUp:
-
That's Beautiful George!!!!
Dave
-
OMG! Tiny enough to be part of a clock works. And it runs so nicely!
:praise2: :praise2:
Pete
-
He made it look so easy. ::) :ThumbsUp:
-
Incredible George. Sorry the build is over so quickly though.
Bill
-
Well worth the (short, in fact very short :o) wait George- a true gem indeed :ThumbsUp: :ThumbsUp:
Congratulations on a really excellent result :praise2:
Tug
-
Just beautiful George! That is some beautiful machining & shows the level of talent you have. When you cranked up the air while running it, not even the slightest run-out on the flywheel...
Fantastic work George,
John
-
Well George I don't know what I could say that hasn't already been said....OK one more WOW!
Have a great day,
Thomas
-
I Love the little dancing man operating the valves !!! cool....
Willy
-
Hi George,
Super nice ! :ThumbsUp:
-
Wow! Just amazing, George!
Kim
-
Unbelievable quality, size and time to make! Very Well Done :praise2: Terry
-
Having made one of these at the design size I am super impressed with this version. A wonderful model.
Jim
-
Very VERY nice George!
Cheers Kerrin
-
:NotWorthy: There is not a single build from you George on this forum, that hasn't impressed me and this one is no exception :NotWorthy:
Best wishes
Per
-
Gentlemen,
As far as I'm concerned the Corliss is finished. There were a couple of other things I wanted to do with it, railings etc, but taking apart all those tiny nuts and bolts every time something needs to be done is painstaking. Maybe over the winter I'll have a change of heart.
I cleaned up the aluminum platform for the video and pictures. It's not buffed but polished with aluminum polish. I took cotton swabs to all the parts to get the excess oil off. The governor works well. I cut a strip of leather from an old wallet, .040 thick x .080 wide for the belt. I tapered the ends and glued them with CA. The first few times I ran it the belt stayed flat then it decided to run on edge. I'm not going to fool with it unless it quits working.
https://www.youtube.com/watch?v=x3FOHkT5Z9o
-
Just stunning George. I bet a lot of custom watchmakers would love to have you working in their studio.
Eric
-
Awesome George. A real beauty.
:ThumbsUp: :ThumbsUp: :ThumbsUp:
-
Hey George,
Everything about it is just perfect :cheers:
Have a great day,
Thomas
-
Most very cool, George! A beautiful engine and a very nice engine. And the governor really adds a nice touch!
Kim
-
George
What a lovely little engine, and built in such a short time as well.
I hope you wont be offended by me mentioning that most full size mill engines would be running the opposite way.
Due to the fact that yours has a trunk guide it does not make any difference, but a lot of engines had slide bar cross-heads and the forces need to be downwards through the engine bed, hence they ran the other way. I may be proved wrong but I don't think I have ever seen one running "top of flywheel towards cylinder"
I am awe of what you have achieved here despite my comments above. I only wish I could be as productive.
All the best
Phil
-
George, that really is a remarkable piece of miniaturisation :praise2: :praise2: Congratulations on such a stunning result :ThumbsUp:
Whilst I concur with Phils observation on a technical point it takes absolutely nothing away from the finished model - it's as I thought it would be - truly, a real 'Gem'.
Regards - Tug
-
Hi Phil,
No offense taken. To be honest I didn't give it any thought. The crank happened to be at BDC so I advanced the eccentric to open the intake valve in that direction. You are correct with your observation.
Thanks for the kind comments.
gbritnell
-
Wow ! Even Keith Stewart (Nevil Shute: "Trustee from the Tool Room") would be amazed.
-
That is one of my favorites of the mini series George, and a nice addition to an amazing body of work!!
Bill
-
Another masterpiece from a Master Craftsman. :NotWorthy:
Regards
Bob
-
Absolutely outstanding piece of work :praise2: Brilliant Terry
-
Wow ! Even Keith Stewart (Nevil Shute: "Trustee from the Tool Room") would be amazed.
I have started to read Trustee from the toolroom and notice he also wrote book called Sliderule so is this on the same engineering theme ? if so i will try and get a copy
willy
-
Wow ! Even Keith Stewart (Nevil Shute: "Trustee from the Tool Room") would be amazed.
I have started to read Trustee from the toolroom and notice he also wrote book called Sliderule so is this on the same engineering theme ? if so i will try and get a copy
willy
At the risk of hijacking this thread... a synopsis of "sliderule" https://en.m.wikipedia.org/wiki/Slide_Rule:_Autobiography_of_an_Engineer
-
Hi All , thanks for that....now lets get back to swarf manufacture !!
willy