Model Engine Maker

Supporting => Vehicles & Models => Topic started by: Johnmcc69 on May 21, 2014, 08:27:20 PM

Title: Rudy's Horizontal Mill engine (CAD drawing)
Post by: Johnmcc69 on May 21, 2014, 08:27:20 PM

This was redrawn from "The Shop Wisdom of Rudy Kouhoupt". A nice little mill engine. I lengthened the crankshaft & added the two smaller pulley's to it. I was going through my books & thought this was a pretty cool little engine, I do like mill engines...

 I still don't have a lathe or mill, but do enjoy modeling them up. Now I need to figure out what to do next.. :happyreader:

 John

Title: Re: Rudy's Horizontal Mill engine (CAD drawing)
Post by: fcheslop on May 21, 2014, 09:45:11 PM

Thank you .I do admire the ability to model this way :praise2:
cheers
frazer

Title: Re: Rudy's Horizontal Mill engine (CAD drawing)
Post by: Johnmcc69 on May 22, 2014, 02:54:47 AM

Thank you Frazer. Not being able to build anything makes me wonder why I do it at all. Everyone here actually BUILDS engines. I have contributed by doing drawings for some folks here, & hope I've helped.

 John

Title: Re: Rudy's Horizontal Mill engine (CAD drawing)
Post by: cfellows on May 22, 2014, 05:50:04 AM

You do real nice work, John.  Your drawings are first class.

Chuck