Model Engine Maker

The Showcase => Shows => Topic started by: crueby on July 18, 2017, 11:58:56 PM

Title: Canandaigua Steam Pageant - Western NY State
Post by: crueby on July 18, 2017, 11:58:56 PM
 Coming up on August 9-12 there is a steam pageant down in the Finger Lakes region in western NY state  that is a lot of fun - they have a building with models on display (running on compressed air), plus LOTS of traction engines and tractors running around, along with sawmill/shingle mill, plowing, construction equipment playing in the dirt piles out back. Great show. If you are near western NY state, come on out. I'll be there, probably either Thursday or Friday - let me know if you can make it up and we can meet up.
 http://www.pageantofsteam.org/ (http://www.pageantofsteam.org/)
 
Title: Re: Canandaigua Steam Pageant - Western NY State
Post by: crueby on August 10, 2017, 11:24:53 PM
Went to the show today, perfect weather, LOTS of traction engines and tractors running around, watched he sawmill, threshing/bailing machines, they even had a rock crusher going, all driven from traction engines. They have two Corliss stationary engines, both running. Also a bunch of models all running in the model building. Great show!

(https://s5.postimg.cc/aef0v46h3/DSC_5931.jpg)

Lots more pictures in this album:
https://postimg.org/gallery/fawcvc9g/ (https://postimg.org/gallery/fawcvc9g/)

One of particular note is a full size version of a gearless right angle drive for a line shaft system, I think it was Brian (or someone else??) who built a model one for his IC engine. This one has a glass port to see the innards, and you can turn the pulleys on the outside to watch it go. Very clever.
(https://s5.postimg.cc/ffqi3b9vr/DSC_5830.jpg)

And some videos:
https://www.youtube.com/watch?v=AkqJa9SWeTM

https://www.youtube.com/watch?v=oooqZZvzPrI

https://www.youtube.com/watch?v=rCL3JOhZFzk

https://www.youtube.com/watch?v=ccCwy04wXXg

https://www.youtube.com/watch?v=uO_SyAxAJko

https://www.youtube.com/watch?v=b9uKEUxBrEo

https://www.youtube.com/watch?v=Kf2W-zyvahU

https://www.youtube.com/watch?v=TR_pWt1aKPM

https://www.youtube.com/watch?v=kXYsgfHZK64

https://www.youtube.com/watch?v=BqnUAB7jH5M
Title: Re: Canandaigua Steam Pageant - Western NY State
Post by: Brian Rupnow on August 10, 2017, 11:54:22 PM
Nice pictures, Chris. Yes, it was me that built the funky 90 degree elbow mechanism.---Brian
Title: Re: Canandaigua Steam Pageant - Western NY State
Post by: crueby on August 11, 2017, 12:47:17 AM
It was great to watch the thresher and bailers in action, elegant, clever, and sure to drive the modern Safety agencies nuts! The traction engines looked to be tricky to get in proper positions for the belts to run well, but once set they provided more than ample power for the sawmill and that rock crusher.
Title: Re: Canandaigua Steam Pageant - Western NY State
Post by: b.lindsey on August 11, 2017, 01:12:11 AM
Great pictures and videos Chris!! And what a beautiful day for it too. Thanks for sharing all of these.

Bill
Title: Re: Canandaigua Steam Pageant - Western NY State
Post by: Flyboy Jim on August 11, 2017, 05:05:28 AM
I really enjoyed the pictures and videos Chris. Thanks for posting.

Jim
Title: Re: Canandaigua Steam Pageant - Western NY State
Post by: fumopuc on August 12, 2017, 06:26:03 PM
Hi Chris, thanks for sharing all your Impressiones.
SimplePortal 2.3.5 © 2008-2012, SimplePortal