Model Engine Maker

The Showcase => Shows => Topic started by: stevehuckss396 on October 27, 2013, 08:52:55 PM

Title: Mid-East Ohio show In Zanesville
Post by: stevehuckss396 on October 27, 2013, 08:52:55 PM
Thought I would post a link from the show earlier this month. All the regulars were there. I even found time to go over and fondle GBritnell's inline 6 cylinder. I also got to see the 302 run and the t-5 trans and rearend were close by. Ron Clark was there and his Offy sounded like it was just about there as far as tuning tho he thinks it can be better. He also brought his inline 6 that is Britnell's 4 stretched. Chuck Kuhn had the Silver Bullet almost done and has added a distributor that I don't believe to be in the drawings. This stuff and much more in the pix!

http://s770.photobucket.com/user/stevehuckss396/library/Zanesville2013
Title: Re: Mid-East Ohio show In Zanesville
Post by: b.lindsey on October 27, 2013, 09:13:41 PM
Lots of beautiful engines there to look at Steve...just wish i lived closer to some of these shows. The mini bike is looking good too!! :whoohoo: Thanks for sharing the pictures.

Bill
Title: Re: Mid-East Ohio show In Zanesville
Post by: ogaryd on October 28, 2013, 12:02:38 AM
Thanks for the great pictures. Lots of beautiful engines. I was born & raised in Dover. makes me wish I back in that neck of the woods, Gary
Title: Re: Mid-East Ohio show In Zanesville
Post by: Don1966 on October 28, 2013, 12:28:16 AM
Steve that was some awesome photos I love them. I just wish it wasn't so far away.

Don
Title: Re: Mid-East Ohio show In Zanesville
Post by: steamer on October 28, 2013, 10:20:18 AM
Thanks for that Steve!....Nice to put a face to the name after all these years!....Bubba! 8)
Title: Re: Mid-East Ohio show In Zanesville
Post by: stevehuckss396 on October 28, 2013, 08:51:11 PM
Nice to put a face to the name after all these years!....Bubba! 8)

Yeah, too bad it was this face. Speaking of putting faces to names.


Left Steve Huck
Right Jerry Pierceall. Jerry never misses a model show and has been shooting video of them for many years. We are both members of the Metro Detroit Metalworkers Club.

(http://i770.photobucket.com/albums/xx349/stevehuckss396/Zanesville2013/DSCN1112.jpg~original)



The world famous Chuck Kuhn on the left and Ron Clark

(http://i770.photobucket.com/albums/xx349/stevehuckss396/Zanesville2013/DSCN1084.jpg~original)



Bobby Shutt

(http://i770.photobucket.com/albums/xx349/stevehuckss396/Zanesville2013/DSCN1029.jpg~original)



Doug Kelly  Super nice guy with some HIGH quality work.

(http://i770.photobucket.com/albums/xx349/stevehuckss396/Zanesville2013/DSCN1079.jpg~original)



Ron and Helen Colanna and George Britnell just over Rons shoulder.

(http://i770.photobucket.com/albums/xx349/stevehuckss396/Zanesville2013/DSCN1060.jpg~original)





Title: Re: Mid-East Ohio show In Zanesville
Post by: Tennessee Whiskey on October 28, 2013, 10:04:20 PM
It is nice to put a name( or post)  with a face. Steve I'd have thought you to be a " younger CNC dude" and I don't mean that in a bad sense. However, with big blockitis and blower syndrome, I should have known better :ROFL:

Whiskey
Title: Re: Mid-East Ohio show In Zanesville
Post by: stevehuckss396 on November 08, 2013, 01:10:39 AM
I was cruising the interweb and found this

https://www.youtube.com/watch?v=kx9VdQfWjW4
Title: Re: Mid-East Ohio show In Zanesville
Post by: Don1966 on November 08, 2013, 01:30:32 AM
Oh wow! That's almost like being there, thanks Steve for the link. A lot of nice engines even yours LOL, I like......... :ThumbsUp:

Don
SimplePortal 2.3.5 © 2008-2012, SimplePortal