Author Topic: dust covers  (Read 2085 times)

Offline collbee

  • Full Member
  • ****
  • Posts: 19
dust covers
« on: June 15, 2020, 02:59:11 AM »
Looking for a dust cover for your machinery? ........ Try searching in your local BARBECUE dealership. Many water-proofed,  shaped and sized  covers are usually available. They can also be cut and trimmed to the needed dimensions if needs be.

These covers could also be used as the source material in the creation of specific shapes if you, or your good partner, is handy with a sewing machine.

Cheers ...
Collbee (aus).

Offline Trevorc

  • Full Member
  • ****
  • Posts: 134
Re: dust covers
« Reply #1 on: June 16, 2020, 08:31:35 PM »
I use old bath towels! They are free,  absorb any oil which may be around and do not cause any condensation.
I am not sure if this is called upcyclng or recycling!
However, after a few years in workshop they arent suitable for gong back in bathroom!
Trevrc

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal