Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
fault light?,, I find many of these machines use cheap plug and spade connectors,, when my mill was faulting I replaced the power cord to machine connectors with better ones,, never a fault again,, I used to work for biotech company that provided machines that had to run,, service people would respond 24/7 to get the unit back up and running,, the phone in check list started with #1 have you checked all the electrical connectors and fuses,, # 2 go back and really check all the connectors and fuses, #3 did you use a meter? one of techs drove 3 hours one way in the wee hours to change a fuse that was claimed to have been checked,, (the machines were provided with a very well stocked spare parts box) good luck..