Author Topic: Hello everyone..... from Co. Durham  (Read 920 times)

Offline Taff Oliver

  • Full Member
  • ****
  • Posts: 13
Hello everyone..... from Co. Durham
« on: January 17, 2020, 09:15:40 PM »
Hi all, just found this site whilst looking for info. I aint an established modeller, just tinkering at the minute. I do have a small lathe and a small mill and various other bits of gear, finding I need more stuff as I go along. Currently building the Paddleduck engine, hence why I ended up finding this site.

Taff
« Last Edit: January 18, 2020, 11:31:20 PM by Taff Oliver »

Offline crueby

  • Full Member
  • *****
  • Posts: 18555
  • Rochester NY
Re: Hello everyone..... from Co. Durham
« Reply #1 on: January 17, 2020, 09:27:10 PM »
Welcome to the group! Lots of info here, and plenty of modellers to help answer any questions. We'd love to see pictures of your model as it comes together.

Offline cnr6400

  • Full Member
  • *****
  • Posts: 2728
Re: Hello everyone..... from Co. Durham
« Reply #2 on: January 17, 2020, 10:10:07 PM »
Welcome Taff! Look forward to see puddleduck progress pictures.     :cheers:
"I've cut that stock three times, and it's still too short!"

Offline propforward

  • Full Member
  • ****
  • Posts: 1656
  • MN, USA
Re: Hello everyone..... from Co. Durham
« Reply #3 on: January 17, 2020, 10:43:49 PM »
Welcome aboard - would love to see the paddleduck - sounds like a lot of fun.
« Last Edit: January 19, 2020, 12:35:56 AM by propforward »
Stuart

Forging ahead regardless.

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Hello everyone..... from Co. Durham
« Reply #4 on: January 17, 2020, 10:57:07 PM »
Hi Taff and welcome to MEM. Glad you found us.

Bill

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7860
  • Portland, Oregon, USA
Re: Hello everyone..... from Co. Durham
« Reply #5 on: January 18, 2020, 01:55:10 AM »
Hey there Taff, Welcome!
Kim

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 2002
  • Independence, Oregon
Re: Hello everyone..... from Co. Durham
« Reply #6 on: January 18, 2020, 02:35:22 AM »
Welcome to MEM Taff.  :hi: Lots of friendly and helpful folks here.

Jim
Sherline 4400 Lathe
Sherline 5400 Mill
"You can do small things on big machines, but you can do small things on small machines".

Offline Don1966

  • Full Member
  • *****
  • Posts: 6817
  • Columbia, MS
Re: Hello everyone..... from Co. Durham
« Reply #7 on: January 18, 2020, 09:06:42 PM »
Welcome to the forum Taff!



 :hi:
Don




 

SimplePortal 2.3.5 © 2008-2012, SimplePortal