Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Hello Chris,Still following along on this build, boy that is a complicated design. If you build the Dump Truck, then you will also have to build that little Marion Dragline...... Have a great day,Thomas
Quote from: Ye-Ole Steam Dude on February 20, 2020, 08:13:42 PMHello Chris,Still following along on this build, boy that is a complicated design. If you build the Dump Truck, then you will also have to build that little Marion Dragline...... Have a great day,ThomasAnd the rock crusher, and the conveyor, .... Gonna need more shelves!
Quote from: crueby on February 20, 2020, 08:56:07 PMQuote from: Ye-Ole Steam Dude on February 20, 2020, 08:13:42 PMHello Chris,Still following along on this build, boy that is a complicated design. If you build the Dump Truck, then you will also have to build that little Marion Dragline...... Have a great day,ThomasAnd the rock crusher, and the conveyor, .... Gonna need more shelves!Hello again Chris,OK not a problem, just send me all those items that are in your way and I will be most happy to store them for you Have a great day,Thomas
Good sequence of operations Chris. Even with your longer mill table it looks like it was pushing the limits for length. What is the chuck in the tail stock on your mill set up? Looks interesting.Jim
Quote from: Flyboy Jim on February 21, 2020, 03:52:18 PMGood sequence of operations Chris. Even with your longer mill table it looks like it was pushing the limits for length. What is the chuck in the tail stock on your mill set up? Looks interesting.JimThe tailstock on the mill is Sherline's mill tailstock. How's that for circular logic?The part is here on their website:https://www.sherline.com/product/3702-adjustable-right-angle-tailstock/It is set up for matching the rotab when its on the vertical adapter, handy to keep long parts supported.
Quote from: crueby on February 21, 2020, 04:08:27 PMQuote from: Flyboy Jim on February 21, 2020, 03:52:18 PMGood sequence of operations Chris. Even with your longer mill table it looks like it was pushing the limits for length. What is the chuck in the tail stock on your mill set up? Looks interesting.JimThe tailstock on the mill is Sherline's mill tailstock. How's that for circular logic?The part is here on their website:https://www.sherline.com/product/3702-adjustable-right-angle-tailstock/It is set up for matching the rotab when its on the vertical adapter, handy to keep long parts supported.Yes, I've got that tailstock for my mill as well. In fact, I'm going to be using it in my setup for doing some milling on the Frame for my PMR #5 build. What I was curious about is the chuck you have IN the tail stock................looks interesting and I don't want to miss out on some neat new tool! Jim
Quote from: crueby on February 20, 2020, 08:56:07 PMQuote from: Ye-Ole Steam Dude on February 20, 2020, 08:13:42 PMHello Chris,Still following along on this build, boy that is a complicated design. If you build the Dump Truck, then you will also have to build that little Marion Dragline...... Have a great day,ThomasAnd the rock crusher, and the conveyor, .... Gonna need more shelves! Forget about the shelves, you are gonna need more elves, not only that but you'll need to find room for another fridge for their booze.