Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Thanks for the suggestion. The casting that the countershaft fits in does not have the flip-top oilers, but it does have little oil holes. The manual states to oil these two spots (one on each side) as part of the daily lubrication routine. I was also wondering about "spindle oil" like Mobil Velocite No. 6 or No.10?
The only thing the manual says about the oil for lubricating the 8 or so regular locations is to "Use a good machine oil no heavier than SAE No. 10."