Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Very nice Dave, but I would have two problems with that system:1) There is no gas supply to my house/workshop2) Anything much bigger than the relatively small dehumidifier that I have bought would require me to build an extension to my very crowded little workshop!
Hello MichaelYour diesel heater for the workshop sounds very interesting, please can you tell me more about your installation. It sounds like it may be just what I am looking for.Obviously you need an exhaust system to remove the fumes to a safe position outside the workshop. This implies a fixed installation. So where is the best place to mount the heater; at floor level, or on the wall or as high as possible?8 kw sounds like plenty of heat for a 30m2 workshop, so the workshop should heat up quickly. Is the heater thermostatically controlled or do you simply switch it on or off manually to control the temperature? Can you run the heater continuously day and night at low power, or only when you are using the workshop?How do you distribute the hot air? Is there a blast of hot air from the heater or is the hot air evenly distributed throughout the workshop?Finally do you have a photo of your installationMike