Author Topic: Stuart Major Beam Engine  (Read 33990 times)

Offline jeff l

  • Full Member
  • ****
  • Posts: 214
Re: Stuart Major Beam Engine
« Reply #195 on: December 08, 2019, 03:03:49 AM »
Hi Adam , I'm sorry I should have gave you a few hints about using the tool . It does not like standard cutting oil , the fact is I cut mine dry . And a moderate rpm works well but you already figured this out , very sorry .Jeff

Online Chipmaster

  • Full Member
  • ****
  • Posts: 629
Re: Stuart Major Beam Engine
« Reply #196 on: December 08, 2019, 05:08:11 PM »
Hi Jeff, apology not necessary, you told me back in May, ".....the most important part is they are cut dry", I forgot your advice.

Andy

Offline Chipswitheverything

  • Full Member
  • ****
  • Posts: 310
Re: Stuart Major Beam Engine
« Reply #197 on: December 09, 2019, 03:23:03 PM »
Hi Andy, impressed by the tin full of bits including some spares that look as if they ought to be put to use rather than left in the tin.  Just a totally ridiculous thought, but if you have any acquaintance who is into "Steam Punk" dressing up , two assembled links would make a fabulous pair of unique ear rings....! Christmas is coming....     Dave

Offline gary.a.ayres

  • Full Member
  • ****
  • Posts: 598
  • British Isles & sometimes France
Re: Stuart Major Beam Engine
« Reply #198 on: December 09, 2019, 08:31:43 PM »
Looking great!

Online Chipmaster

  • Full Member
  • ****
  • Posts: 629
Re: Stuart Major Beam Engine
« Reply #199 on: Today at 10:03:56 PM »