Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
I found that bore to be one of the trickier operations. Nicely done, especially on the Sherline!!Bill
Hmm, nice approach. I think I'd use a boring head for the recess, but only because I don't have a rotary table...yet.
Nicely done on the boring and facing Jim. I'm impressed with that much distance away from the clamped surface that the casting was rigid enough to do the recess without some form of supplementary support. Of course nothing to say about your skill in pulling it off. Mike
Great progress Jim. When you do get to boring the cylinder, I would suggest holding it by the top end so you can bore the cylinder and true the base in one chucking.