Author Topic: Royal Collet Closer for Clausing 59xx lathes  (Read 328 times)

Offline Bobsmodels

  • Full Member
  • ****
  • Posts: 279
Royal Collet Closer for Clausing 59xx lathes
« on: October 05, 2019, 01:56:24 AM »
Hi

Last year I installed a Royal Collet Closer on my Clausing 5904 lathe.  In the process I collected a lot of information from both Clausing and Royal Documentation.  I also did my own drawings for some of the parts.  Included is how to determine correct tube length and pictures.  I put everything I found and created in one PDF.  I uploaded on the Clausing site on Yahoo.  Here is the link:

  https://groups.yahoo.com/neo/groups/clausing_lathe_and_mill/files/Clausing%20Lathes/Royal%20Collet%20Closer%20Clausing%2059XX%20Documentation.pdf

I am not sure if you need a login.  It is a large file 5Mb. and would not upload here due to large file size.

I just uploaded to Dropbox, it may be easier to download from there here is link:

https://www.dropbox.com/s/0irjcmelgc80fnk/Royal%20Collet%20Closer%20Clausing%2059XX%20Documentation.pdf?dl=0

Hope it will be of some use for those wanting to add the attachment.  Much of the information is somewhat generic so it would apply to adding a Royal Closer to other lathes.

Bob
« Last Edit: October 05, 2019, 02:03:41 AM by Bobsmodels »