Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Two little CHUK's. Those that follow Jo's Seal thread will know that Surus recently acquired a set of CHUK 2 castings from eBay. Included was a bearing housing for a CHUK 3
Quote from: Alyn Foundry on August 30, 2019, 07:13:38 PM Two little CHUK's. Those that follow Jo's Seal thread will know that Surus recently acquired a set of CHUK 2 castings from eBay. Included was a bearing housing for a CHUK 3I though Jo bought a CHUK 1 (A Frame) and also got the support for a CHUK2 (as per my CHUKY) with CHUK 3 being the horizontal
Hope you don't have the same issues with the base casting Jo.Bill
Jo has the little fellow been trying out your new sandblast cabinet on that base casting or have you just been busy with the wire brush as it looks a lot more pristine than in the e-bay photos now the Welsh wonder coating has been removed?
You will probably have to make the flap valve larger too as that is located sideways by the hole you have bored, the notes suggest 40mm