Author Topic: JC attempts the MEM Corliss  (Read 26869 times)

Offline JCvdW

  • Full Member
  • ****
  • Posts: 105
  • Somerset West, South Africa
Re: JC attempts the MEM Corliss
« Reply #210 on: July 22, 2022, 09:25:52 AM »
warrenmaker, thank you very much for the kind words!

In the mean time, the engine has received its own display case, as described here: https://www.modelenginemaker.com/index.php/topic,10902.msg252564.html#msg252564

If I remember correctly, I found the original drawings scattered through this thread: https://www.modelenginemaker.com/index.php/topic,1333.0.html . There were a few corrections to the drawings along the way.

The imperial and metric plans for the MEM Corliss Engine can be found here: https://drive.google.com/drive/folders/1hy8iCIJsRreemegKL2SVauRsrLly8_40?usp=sharing (The pdf files are too large to be attached to this post). I believe these versions include all the corrections that were made.

I also created a 3D CAD model of the engine in Fusion 360 as shown here:  https://a360.co/3RV6f7g. I made most of my own shop drawings from the 3D model, but they sometimes had mistakes, which of course I was fully aware of at the time.
There is no planet B ...

Offline RichardHed

  • Full Member
  • ****
  • Posts: 6
Re: JC attempts the MEM Corliss
« Reply #211 on: October 27, 2022, 04:17:50 AM »
Do you have plans for this?  Where can one purchase the plans?

Offline crueby

  • Full Member
  • *****
  • Posts: 18557
  • Rochester NY
Re: JC attempts the MEM Corliss
« Reply #212 on: October 27, 2022, 04:20:06 AM »
Do you have plans for this?  Where can one purchase the plans?
The post just before yours gives the links... Plans are free and on this site.

Offline RichardHed

  • Full Member
  • ****
  • Posts: 6
Re: JC attempts the MEM Corliss
« Reply #213 on: October 27, 2022, 06:39:00 PM »
Thank you.  I found them just minutes after I emailed you.

Offline crueby

  • Full Member
  • *****
  • Posts: 18557
  • Rochester NY
Re: JC attempts the MEM Corliss
« Reply #214 on: October 27, 2022, 07:16:00 PM »
Thank you.  I found them just minutes after I emailed you.
Great!  Its a great engine, several build logs on the forum so far, hope you add yours!

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal