Author Topic: Clutch Pulley for IHC Mogul/Famous  (Read 434 times)

Offline TobyTetzy

  • Full Member
  • ****
  • Posts: 132
Clutch Pulley for IHC Mogul/Famous
« on: May 12, 2019, 07:38:54 PM »
Hello,

I'll start a new thread on the topic, because otherwise it could go down in the IHC Famous Thread.

I saw a clutch pulley in this video, which I like very much.


Here I have found more pictures of the model.

https://www.tapatalk.com/groups/modelsteam/ihc-mogul-1-4-scale-side-shaft-engine-model-t86816.html

There is talk of a Mr. Sam Harman. Unfortunately I did not find anything.

Since I have not found any further information from the clutch, just a few pictures on Ebay, I have started to draw the clutch Pulley myself.
I am not sure if it really looks and works like this.

Maybe someone else has more information or pictures for me.
I am also interested in drawings by Mr. Sam Harman or contact him or YouTube's "reddrryder".

Thank you, greetings Toby

Offline Brian Rupnow

  • Full Member
  • *****
  • Posts: 4942
  • Barrie, Ontario Canada
Re: Clutch Pulley for IHC Mogul/Famous
« Reply #1 on: May 12, 2019, 08:21:46 PM »
Nice engine Toby, and very interesting clutch mechanism. If you would like to share, please send me your 3d model of the clutch as a .step file or a .x_t Parasolid file to brupnow@rogers.com  I might try and build one of those. If you don't wish to share, I understand.. Brian Rupnow

Offline Jasonb

  • Full Member
  • *****
  • Posts: 6417
  • Surrey, UK
Re: Clutch Pulley for IHC Mogul/Famous
« Reply #2 on: May 12, 2019, 08:24:18 PM »
Toby look at Mogulville Machine for Sam Harman

http://www.antiquengines.com/Davis_Model_Suppliers_List_.htm

Offline TobyTetzy

  • Full Member
  • ****
  • Posts: 132
Re: Clutch Pulley for IHC Mogul/Famous
« Reply #3 on: May 13, 2019, 03:54:01 AM »
Hello and good morning.

I was able to reach Sam Harman and Gil (Redrdryder) by e-mail.
Unfortunately, Sam Harman has no drawings of the clutch.
He just sent me two pictures.
I would have liked to get pictures of the parts, especially from the outer pulley, from the back side.

Greeting Toby

Offline TobyTetzy

  • Full Member
  • ****
  • Posts: 132
Re: Clutch Pulley for IHC Mogul/Famous
« Reply #4 on: May 14, 2019, 08:09:04 PM »
Hello,

I have revised the clutch Pulley a bit.
The levers that hold the clutch jaws are now fully guided.
This meant that the clutch shoe holders had to be changed.
The handwheel now looks a bit better.
I hope it is so much better.

Unfortunately, I did not get any further information or pictures on request from Sam Harman and Reddrdryer.

Greeting Toby