Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Good evening all,With the 3 tiny singles finished I had a request for a twin using the same cylinder/column pieces so with a couple of drawings made I started on another set of parts. Most of the parts were covered in the tiny vertical thread so I'm just going to post some pictures of this engine. I still have to figure out how I'm going to build the piping so that it can be disassembled if necessary. I have tested both cylinders individually and they run just fine so it ought to tick over nice and slow with the piping on it. gbritnell